[PATCH AUTOSEL 5.15 1/9] wifi: mac80211: wake the queues in case of failure in resume

[PATCH AUTOSEL 5.15 1/9] wifi: mac80211: wake the queues in case of failure in resume

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit 220bf000530f9b1114fa2a1022a871c7ce8a0b38 ]

In case we fail to resume, we'll WARN with
"Hardware became unavailable during restart." and we'll wait until user
space does something. It'll typically bring the interface down and up to
recover. This won't work though because the queues are still stopped on
IEEE80211_QUEUE_STOP_REASON_SUSPEND reason.
Make sure we clear that reason so that we give a chance to the recovery
to succeed.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241119173108.cd628f560f97.I76a15fdb92de450e5329940125f3c58916be3942@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/util.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 85d3d2034d43..cc78d3cba45e 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2374,6 +2374,9 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 			WARN(1, "Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue.\n");
 		else
 			WARN(1, "Hardware became unavailable during restart.\n");
+		ieee80211_wake_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP,
+						IEEE80211_QUEUE_STOP_REASON_SUSPEND,
+						false);
 		ieee80211_handle_reconfig_failure(local);
 		return res;
 	}
-- 
2.39.5

[PATCH AUTOSEL 5.15 2/9] drm/amdkfd: Correct the migration DMA map direction

[Sasha Levin]

From: Prike Liang <Prike.Liang@amd.com>

[ Upstream commit 5c3de6b02d38eb9386edf50490e050bb44398e40 ]

The SVM DMA device map direction should be set the same as
the DMA unmap setting, otherwise the DMA core will report
the following warning.

Before finialize this solution, there're some discussion on
the DMA mapping type(stream-based or coherent) in this KFD
migration case, followed by https://lore.kernel.org/all/04d4ab32
-45a1-4b88-86ee-fb0f35a0ca40@amd.com/T/.

As there's no dma_sync_single_for_*() in the DMA buffer accessed
that because this migration operation should be sync properly and
automatically. Give that there's might not be a performance problem
in various cache sync policy of DMA sync. Therefore, in order to
simplify the DMA direction setting alignment, let's set the DMA map
direction as BIDIRECTIONAL.

[  150.834218] WARNING: CPU: 8 PID: 1812 at kernel/dma/debug.c:1028 check_unmap+0x1cc/0x930
[  150.834225] Modules linked in: amdgpu(OE) amdxcp drm_exec(OE) gpu_sched drm_buddy(OE) drm_ttm_helper(OE) ttm(OE) drm_suballoc_helper(OE) drm_display_helper(OE) drm_kms_helper(OE) i2c_algo_bit rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace netfs xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo iptable_nat xt_addrtype iptable_filter br_netfilter nvme_fabrics overlay nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c bridge stp llc sch_fq_codel intel_rapl_msr amd_atl intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic snd_hda_scodec_component snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg edac_mce_amd snd_pci_acp6x snd_hda_codec snd_acp_config snd_hda_core snd_hwdep snd_soc_acpi kvm_amd sunrpc snd_pcm kvm binfmt_misc snd_seq_midi crct10dif_pclmul snd_seq_midi_event ghash_clmulni_intel sha512_ssse3 snd_rawmidi nls_iso8859_1 sha256_ssse3 sha1_ssse3 snd_seq aesni_intel snd_seq_device crypto_simd snd_timer cryptd input_leds
[  150.834310]  wmi_bmof serio_raw k10temp rapl snd sp5100_tco ipmi_devintf soundcore ccp ipmi_msghandler cm32181 industrialio mac_hid msr parport_pc ppdev lp parport efi_pstore drm(OE) ip_tables x_tables pci_stub crc32_pclmul nvme ahci libahci i2c_piix4 r8169 nvme_core i2c_designware_pci realtek i2c_ccgx_ucsi video wmi hid_generic cdc_ether usbnet usbhid hid r8152 mii
[  150.834354] CPU: 8 PID: 1812 Comm: rocrtst64 Tainted: G           OE      6.10.0-custom #492
[  150.834358] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS RMJ1009A 06/13/2021
[  150.834360] RIP: 0010:check_unmap+0x1cc/0x930
[  150.834363] Code: c0 4c 89 4d c8 e8 34 bf 86 00 4c 8b 4d c8 4c 8b 45 c0 48 8b 4d b8 48 89 c6 41 57 4c 89 ea 48 c7 c7 80 49 b4 84 e8 b4 81 f3 ff <0f> 0b 48 c7 c7 04 83 ac 84 e8 76 ba fc ff 41 8b 76 4c 49 8d 7e 50
[  150.834365] RSP: 0018:ffffaac5023739e0 EFLAGS: 00010086
[  150.834368] RAX: 0000000000000000 RBX: ffffffff8566a2e0 RCX: 0000000000000027
[  150.834370] RDX: ffff8f6a8f621688 RSI: 0000000000000001 RDI: ffff8f6a8f621680
[  150.834372] RBP: ffffaac502373a30 R08: 00000000000000c9 R09: ffffaac502373850
[  150.834373] R10: ffffaac502373848 R11: ffffffff84f46328 R12: ffffaac502373a40
[  150.834375] R13: ffff8f6741045330 R14: ffff8f6741a77700 R15: ffffffff84ac831b
[  150.834377] FS:  00007faf0fc94c00(0000) GS:ffff8f6a8f600000(0000) knlGS:0000000000000000
[  150.834379] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  150.834381] CR2: 00007faf0b600020 CR3: 000000010a52e000 CR4: 0000000000350ef0
[  150.834383] Call Trace:
[  150.834385]  <TASK>
[  150.834387]  ? show_regs+0x6d/0x80
[  150.834393]  ? __warn+0x8c/0x140
[  150.834397]  ? check_unmap+0x1cc/0x930
[  150.834400]  ? report_bug+0x193/0x1a0
[  150.834406]  ? handle_bug+0x46/0x80
[  150.834410]  ? exc_invalid_op+0x1d/0x80
[  150.834413]  ? asm_exc_invalid_op+0x1f/0x30
[  150.834420]  ? check_unmap+0x1cc/0x930
[  150.834425]  debug_dma_unmap_page+0x86/0x90
[  150.834431]  ? srso_return_thunk+0x5/0x5f
[  150.834435]  ? rmap_walk+0x28/0x50
[  150.834438]  ? srso_return_thunk+0x5/0x5f
[  150.834441]  ? remove_migration_ptes+0x79/0x80
[  150.834445]  ? srso_return_thunk+0x5/0x5f
[  150.834448]  dma_unmap_page_attrs+0xfa/0x1d0
[  150.834453]  svm_range_dma_unmap_dev+0x8a/0xf0 [amdgpu]
[  150.834710]  svm_migrate_ram_to_vram+0x361/0x740 [amdgpu]
[  150.834914]  svm_migrate_to_vram+0xa8/0xe0 [amdgpu]
[  150.835111]  svm_range_set_attr+0xff2/0x1450 [amdgpu]
[  150.835311]  svm_ioctl+0x4a/0x50 [amdgpu]
[  150.835510]  kfd_ioctl_svm+0x54/0x90 [amdgpu]
[  150.835701]  kfd_ioctl+0x3c2/0x530 [amdgpu]
[  150.835888]  ? __pfx_kfd_ioctl_svm+0x10/0x10 [amdgpu]
[  150.836075]  ? srso_return_thunk+0x5/0x5f
[  150.836080]  ? tomoyo_file_ioctl+0x20/0x30
[  150.836086]  __x64_sys_ioctl+0x9c/0xd0
[  150.836091]  x64_sys_call+0x1219/0x20d0
[  150.836095]  do_syscall_64+0x51/0x120
[  150.836098]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  150.836102] RIP: 0033:0x7faf0f11a94f
[  150.836105] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[  150.836107] RSP: 002b:00007ffeced26bc0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[  150.836110] RAX: ffffffffffffffda RBX: 000055c683528fb0 RCX: 00007faf0f11a94f
[  150.836112] RDX: 00007ffeced26c60 RSI: 00000000c0484b20 RDI: 0000000000000003
[  150.836114] RBP: 00007ffeced26c50 R08: 0000000000000000 R09: 0000000000000001
[  150.836115] R10: 0000000000000032 R11: 0000000000000246 R12: 000055c683528bd0
[  150.836117] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000000
[  150.836122]  </TASK>
[  150.836124] ---[ end trace 0000000000000000 ]---

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_migrate.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c
index 131d98c600ee..013749cd3ae2 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c
@@ -302,7 +302,7 @@ svm_migrate_copy_to_vram(struct amdgpu_device *adev, struct svm_range *prange,
 			migrate->dst[i] = migrate_pfn(migrate->dst[i]);
 			migrate->dst[i] |= MIGRATE_PFN_LOCKED;
 			src[i] = dma_map_page(dev, spage, 0, PAGE_SIZE,
-					      DMA_TO_DEVICE);
+					      DMA_BIDIRECTIONAL);
 			r = dma_mapping_error(dev, src[i]);
 			if (r) {
 				pr_debug("failed %d dma_map_page\n", r);
@@ -569,7 +569,7 @@ svm_migrate_copy_to_ram(struct amdgpu_device *adev, struct svm_range *prange,
 			goto out_oom;
 		}
 
-		dst[i] = dma_map_page(dev, dpage, 0, PAGE_SIZE, DMA_FROM_DEVICE);
+		dst[i] = dma_map_page(dev, dpage, 0, PAGE_SIZE, DMA_BIDIRECTIONAL);
 		r = dma_mapping_error(dev, dst[i]);
 		if (r) {
 			pr_debug("failed %d dma_map_page\n", r);
-- 
2.39.5

[PATCH AUTOSEL 5.15 3/9] btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount

[Sasha Levin]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit f10bef73fb355e3fc85e63a50386798be68ff486 ]

During the unmount path, at close_ctree(), we first stop the cleaner
kthread, using kthread_stop() which frees the associated task_struct, and
then stop and destroy all the work queues. However after we stopped the
cleaner we may still have a worker from the delalloc_workers queue running
inode.c:submit_compressed_extents(), which calls btrfs_add_delayed_iput(),
which in turn tries to wake up the cleaner kthread - which was already
destroyed before, resulting in a use-after-free on the task_struct.

Syzbot reported this with the following stack traces:

  BUG: KASAN: slab-use-after-free in __lock_acquire+0x78/0x2100 kernel/locking/lockdep.c:5089
  Read of size 8 at addr ffff8880259d2818 by task kworker/u8:3/52

  CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.13.0-rc1-syzkaller-00002-gcdd30ebb1b9f #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
  Workqueue: btrfs-delalloc btrfs_work_helper
  Call Trace:
   <TASK>
   __dump_stack lib/dump_stack.c:94 [inline]
   dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
   print_address_description mm/kasan/report.c:378 [inline]
   print_report+0x169/0x550 mm/kasan/report.c:489
   kasan_report+0x143/0x180 mm/kasan/report.c:602
   __lock_acquire+0x78/0x2100 kernel/locking/lockdep.c:5089
   lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
   __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
   _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162
   class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline]
   try_to_wake_up+0xc2/0x1470 kernel/sched/core.c:4205
   submit_compressed_extents+0xdf/0x16e0 fs/btrfs/inode.c:1615
   run_ordered_work fs/btrfs/async-thread.c:288 [inline]
   btrfs_work_helper+0x96f/0xc40 fs/btrfs/async-thread.c:324
   process_one_work kernel/workqueue.c:3229 [inline]
   process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310
   worker_thread+0x870/0xd30 kernel/workqueue.c:3391
   kthread+0x2f0/0x390 kernel/kthread.c:389
   ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
   ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
   </TASK>

  Allocated by task 2:
   kasan_save_stack mm/kasan/common.c:47 [inline]
   kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
   unpoison_slab_object mm/kasan/common.c:319 [inline]
   __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345
   kasan_slab_alloc include/linux/kasan.h:250 [inline]
   slab_post_alloc_hook mm/slub.c:4104 [inline]
   slab_alloc_node mm/slub.c:4153 [inline]
   kmem_cache_alloc_node_noprof+0x1d9/0x380 mm/slub.c:4205
   alloc_task_struct_node kernel/fork.c:180 [inline]
   dup_task_struct+0x57/0x8c0 kernel/fork.c:1113
   copy_process+0x5d1/0x3d50 kernel/fork.c:2225
   kernel_clone+0x223/0x870 kernel/fork.c:2807
   kernel_thread+0x1bc/0x240 kernel/fork.c:2869
   create_kthread kernel/kthread.c:412 [inline]
   kthreadd+0x60d/0x810 kernel/kthread.c:767
   ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
   ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

  Freed by task 24:
   kasan_save_stack mm/kasan/common.c:47 [inline]
   kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
   kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582
   poison_slab_object mm/kasan/common.c:247 [inline]
   __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
   kasan_slab_free include/linux/kasan.h:233 [inline]
   slab_free_hook mm/slub.c:2338 [inline]
   slab_free mm/slub.c:4598 [inline]
   kmem_cache_free+0x195/0x410 mm/slub.c:4700
   put_task_struct include/linux/sched/task.h:144 [inline]
   delayed_put_task_struct+0x125/0x300 kernel/exit.c:227
   rcu_do_batch kernel/rcu/tree.c:2567 [inline]
   rcu_core+0xaaa/0x17a0 kernel/rcu/tree.c:2823
   handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:554
   run_ksoftirqd+0xca/0x130 kernel/softirq.c:943
   smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164
   kthread+0x2f0/0x390 kernel/kthread.c:389
   ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
   ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

  Last potentially related work creation:
   kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47
   __kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:544
   __call_rcu_common kernel/rcu/tree.c:3086 [inline]
   call_rcu+0x167/0xa70 kernel/rcu/tree.c:3190
   context_switch kernel/sched/core.c:5372 [inline]
   __schedule+0x1803/0x4be0 kernel/sched/core.c:6756
   __schedule_loop kernel/sched/core.c:6833 [inline]
   schedule+0x14b/0x320 kernel/sched/core.c:6848
   schedule_timeout+0xb0/0x290 kernel/time/sleep_timeout.c:75
   do_wait_for_common kernel/sched/completion.c:95 [inline]
   __wait_for_common kernel/sched/completion.c:116 [inline]
   wait_for_common kernel/sched/completion.c:127 [inline]
   wait_for_completion+0x355/0x620 kernel/sched/completion.c:148
   kthread_stop+0x19e/0x640 kernel/kthread.c:712
   close_ctree+0x524/0xd60 fs/btrfs/disk-io.c:4328
   generic_shutdown_super+0x139/0x2d0 fs/super.c:642
   kill_anon_super+0x3b/0x70 fs/super.c:1237
   btrfs_kill_super+0x41/0x50 fs/btrfs/super.c:2112
   deactivate_locked_super+0xc4/0x130 fs/super.c:473
   cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373
   task_work_run+0x24f/0x310 kernel/task_work.c:239
   ptrace_notify+0x2d2/0x380 kernel/signal.c:2503
   ptrace_report_syscall include/linux/ptrace.h:415 [inline]
   ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
   syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173
   syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
   __syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
   syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218
   do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
   entry_SYSCALL_64_after_hwframe+0x77/0x7f

  The buggy address belongs to the object at ffff8880259d1e00
   which belongs to the cache task_struct of size 7424
  The buggy address is located 2584 bytes inside of
   freed 7424-byte region [ffff8880259d1e00, ffff8880259d3b00)

  The buggy address belongs to the physical page:
  page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x259d0
  head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
  memcg:ffff88802f4b56c1
  flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff)
  page_type: f5(slab)
  raw: 00fff00000000040 ffff88801bafe500 dead000000000100 dead000000000122
  raw: 0000000000000000 0000000000040004 00000001f5000000 ffff88802f4b56c1
  head: 00fff00000000040 ffff88801bafe500 dead000000000100 dead000000000122
  head: 0000000000000000 0000000000040004 00000001f5000000 ffff88802f4b56c1
  head: 00fff00000000003 ffffea0000967401 ffffffffffffffff 0000000000000000
  head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
  page dumped because: kasan: bad access detected
  page_owner tracks the page as allocated
  page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 12, tgid 12 (kworker/u8:1), ts 7328037942, free_ts 0
   set_page_owner include/linux/page_owner.h:32 [inline]
   post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1556
   prep_new_page mm/page_alloc.c:1564 [inline]
   get_page_from_freelist+0x3651/0x37a0 mm/page_alloc.c:3474
   __alloc_pages_noprof+0x292/0x710 mm/page_alloc.c:4751
   alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265
   alloc_slab_page+0x6a/0x140 mm/slub.c:2408
   allocate_slab+0x5a/0x2f0 mm/slub.c:2574
   new_slab mm/slub.c:2627 [inline]
   ___slab_alloc+0xcd1/0x14b0 mm/slub.c:3815
   __slab_alloc+0x58/0xa0 mm/slub.c:3905
   __slab_alloc_node mm/slub.c:3980 [inline]
   slab_alloc_node mm/slub.c:4141 [inline]
   kmem_cache_alloc_node_noprof+0x269/0x380 mm/slub.c:4205
   alloc_task_struct_node kernel/fork.c:180 [inline]
   dup_task_struct+0x57/0x8c0 kernel/fork.c:1113
   copy_process+0x5d1/0x3d50 kernel/fork.c:2225
   kernel_clone+0x223/0x870 kernel/fork.c:2807
   user_mode_thread+0x132/0x1a0 kernel/fork.c:2885
   call_usermodehelper_exec_work+0x5c/0x230 kernel/umh.c:171
   process_one_work kernel/workqueue.c:3229 [inline]
   process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310
   worker_thread+0x870/0xd30 kernel/workqueue.c:3391
  page_owner free stack trace missing

  Memory state around the buggy address:
   ffff8880259d2700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
   ffff8880259d2780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  >ffff8880259d2800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                              ^
   ffff8880259d2880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
   ffff8880259d2900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ==================================================================

Fix this by flushing the delalloc workers queue before stopping the
cleaner kthread.

Reported-by: syzbot+b7cf50a0c173770dcb14@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/674ed7e8.050a0220.48a03.0031.GAE@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/disk-io.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 73796da9a194..9c2d6f96f46d 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -4405,6 +4405,15 @@ void __cold close_ctree(struct btrfs_fs_info *fs_info)
 	 * already the cleaner, but below we run all pending delayed iputs.
 	 */
 	btrfs_flush_workqueue(fs_info->fixup_workers);
+	/*
+	 * Similar case here, we have to wait for delalloc workers before we
+	 * proceed below and stop the cleaner kthread, otherwise we trigger a
+	 * use-after-tree on the cleaner kthread task_struct when a delalloc
+	 * worker running submit_compressed_extents() adds a delayed iput, which
+	 * does a wake up on the cleaner kthread, which was already freed below
+	 * when we call kthread_stop().
+	 */
+	btrfs_flush_workqueue(fs_info->delalloc_workers);
 
 	/*
 	 * After we parked the cleaner kthread, ordered extents may have
-- 
2.39.5

[PATCH AUTOSEL 5.15 4/9] sound: usb: enable DSD output for ddHiFi TC44C

[Sasha Levin]

From: Adrian Ratiu <adrian.ratiu@collabora.com>

[ Upstream commit c84bd6c810d1880194fea2229c7086e4b73fddc1 ]

This is a UAC 2 DAC capable of raw DSD on intf 2 alt 4:

Bus 007 Device 004: ID 262a:9302 SAVITECH Corp. TC44C
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 [unknown]
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x262a SAVITECH Corp.
  idProduct          0x9302 TC44C
  bcdDevice            0.01
  iManufacturer           1 DDHIFI
  iProduct                2 TC44C
  iSerial                 6 5000000001
.......
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       4
      bNumEndpoints           2
      bInterfaceClass         1 Audio
      bInterfaceSubClass      2 Streaming
      bInterfaceProtocol      32
      iInterface              0
	AudioStreaming Interface Descriptor:
          bLength                16
          bDescriptorType        36
          bDescriptorSubtype     1 (AS_GENERAL)
          bTerminalLink          3
          bmControls             0x00
          bFormatType            1
          bmFormats              0x80000000
          bNrChannels            2
          bmChannelConfig        0x00000000
          iChannelNames          0
.......

Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Link: https://patch.msgid.link/20241209090529.16134-1-adrian.ratiu@collabora.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 9d98a0e6a9f4..8841251f7331 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1903,6 +1903,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
 		   QUIRK_FLAG_GET_SAMPLE_RATE),
 	DEVICE_FLG(0x2522, 0x0007, /* LH Labs Geek Out HD Audio 1V5 */
 		   QUIRK_FLAG_SET_IFACE_FIRST),
+	DEVICE_FLG(0x262a, 0x9302, /* ddHiFi TC44C */
+		   QUIRK_FLAG_DSD_RAW),
 	DEVICE_FLG(0x2708, 0x0002, /* Audient iD14 */
 		   QUIRK_FLAG_IGNORE_CTL_ERROR),
 	DEVICE_FLG(0x2912, 0x30c8, /* Audioengine D1 */
-- 
2.39.5

[PATCH AUTOSEL 5.15 5/9] sound: usb: format: don't warn that raw DSD is unsupported

[Sasha Levin]

From: Adrian Ratiu <adrian.ratiu@collabora.com>

[ Upstream commit b50a3e98442b8d72f061617c7f7a71f7dba19484 ]

UAC 2 & 3 DAC's set bit 31 of the format to signal support for a
RAW_DATA type, typically used for DSD playback.

This is correctly tested by (format & UAC*_FORMAT_TYPE_I_RAW_DATA),
fp->dsd_raw = true; and call snd_usb_interface_dsd_format_quirks(),
however a confusing and unnecessary message gets printed because
the bit is not properly tested in the last "unsupported" if test:
if (format & ~0x3F) { ... }

For example the output:

usb 7-1: new high-speed USB device number 5 using xhci_hcd
usb 7-1: New USB device found, idVendor=262a, idProduct=9302, bcdDevice=0.01
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 7-1: Product: TC44C
usb 7-1: Manufacturer: TC44C
usb 7-1: SerialNumber: 5000000001
hid-generic 0003:262A:9302.001E: No inputs registered, leaving
hid-generic 0003:262A:9302.001E: hidraw6: USB HID v1.00 Device [DDHIFI TC44C] on usb-0000:08:00.3-1/input0
usb 7-1: 2:4 : unsupported format bits 0x100000000

This last "unsupported format" is actually wrong: we know the
format is a RAW_DATA which we assume is DSD, so there is no need
to print the confusing message.

This we unset bit 31 of the format after recognizing it, to avoid
the message.

Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Link: https://patch.msgid.link/20241209090529.16134-2-adrian.ratiu@collabora.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/format.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/sound/usb/format.c b/sound/usb/format.c
index 3b45d0ee7693..3b3a5ea6fcbf 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -60,6 +60,8 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
 			pcm_formats |= SNDRV_PCM_FMTBIT_SPECIAL;
 			/* flag potentially raw DSD capable altsettings */
 			fp->dsd_raw = true;
+			/* clear special format bit to avoid "unsupported format" msg below */
+			format &= ~UAC2_FORMAT_TYPE_I_RAW_DATA;
 		}
 
 		format <<= 1;
@@ -71,8 +73,11 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
 		sample_width = as->bBitResolution;
 		sample_bytes = as->bSubslotSize;
 
-		if (format & UAC3_FORMAT_TYPE_I_RAW_DATA)
+		if (format & UAC3_FORMAT_TYPE_I_RAW_DATA) {
 			pcm_formats |= SNDRV_PCM_FMTBIT_SPECIAL;
+			/* clear special format bit to avoid "unsupported format" msg below */
+			format &= ~UAC3_FORMAT_TYPE_I_RAW_DATA;
+		}
 
 		format <<= 1;
 		break;
-- 
2.39.5

[PATCH AUTOSEL 5.15 6/9] bpf: fix potential error return

[Sasha Levin]

From: Anton Protopopov <aspsk@isovalent.com>

[ Upstream commit c4441ca86afe4814039ee1b32c39d833c1a16bbc ]

The bpf_remove_insns() function returns WARN_ON_ONCE(error), where
error is a result of bpf_adj_branches(), and thus should be always 0
However, if for any reason it is not 0, then it will be converted to
boolean by WARN_ON_ONCE and returned to user space as 1, not an actual
error value. Fix this by returning the original err after the WARN check.

Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241210114245.836164-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/core.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index f36f7b71dc07..d7dbca573df3 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -504,6 +504,8 @@ struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off,
 
 int bpf_remove_insns(struct bpf_prog *prog, u32 off, u32 cnt)
 {
+	int err;
+
 	/* Branch offsets can't overflow when program is shrinking, no need
 	 * to call bpf_adj_branches(..., true) here
 	 */
@@ -511,7 +513,9 @@ int bpf_remove_insns(struct bpf_prog *prog, u32 off, u32 cnt)
 		sizeof(struct bpf_insn) * (prog->len - off - cnt));
 	prog->len -= cnt;
 
-	return WARN_ON_ONCE(bpf_adj_branches(prog, off, off + cnt, off, false));
+	err = bpf_adj_branches(prog, off, off + cnt, off, false);
+	WARN_ON_ONCE(err);
+	return err;
 }
 
 static void bpf_prog_kallsyms_del_subprogs(struct bpf_prog *fp)
-- 
2.39.5

[PATCH AUTOSEL 5.15 7/9] net: usb: qmi_wwan: add Telit FE910C04 compositions

[Sasha Levin]

From: Daniele Palmas <dnlplm@gmail.com>

[ Upstream commit 3b58b53a26598209a7ad8259a5114ce71f7c3d64 ]

Add the following Telit FE910C04 compositions:

0x10c0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)
T:  Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 13 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c0 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c4: rmnet + tty (AT) + tty (AT) + tty (diag)
T:  Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 14 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c4 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c8: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb
T:  Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c8 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://patch.msgid.link/20241209151821.3688829-1-dnlplm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 758af6ea861b..96cbc8a7ee9b 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1367,6 +1367,9 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a0, 0)}, /* Telit FN920C04 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a4, 0)}, /* Telit FN920C04 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a9, 0)}, /* Telit FN920C04 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10c0, 0)}, /* Telit FE910C04 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10c4, 0)}, /* Telit FE910C04 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10c8, 0)}, /* Telit FE910C04 */
 	{QMI_FIXED_INTF(0x1bc7, 0x1100, 3)},	/* Telit ME910 */
 	{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)},	/* Telit ME910 dual modem */
 	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */
-- 
2.39.5

[PATCH AUTOSEL 5.15 8/9] irqchip/gic: Correct declaration of *percpu_base pointer in union gic_base

[Sasha Levin]

From: Uros Bizjak <ubizjak@gmail.com>

[ Upstream commit a1855f1b7c33642c9f7a01991fb763342a312e9b ]

percpu_base is used in various percpu functions that expect variable in
__percpu address space. Correct the declaration of percpu_base to

void __iomem * __percpu *percpu_base;

to declare the variable as __percpu pointer.

The patch fixes several sparse warnings:

irq-gic.c:1172:44: warning: incorrect type in assignment (different address spaces)
irq-gic.c:1172:44:    expected void [noderef] __percpu *[noderef] __iomem *percpu_base
irq-gic.c:1172:44:    got void [noderef] __iomem *[noderef] __percpu *
...
irq-gic.c:1231:43: warning: incorrect type in argument 1 (different address spaces)
irq-gic.c:1231:43:    expected void [noderef] __percpu *__pdata
irq-gic.c:1231:43:    got void [noderef] __percpu *[noderef] __iomem *percpu_base

There were no changes in the resulting object files.

Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20241213145809.2918-2-ubizjak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-gic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 99077f30f699..c941037199c8 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -62,7 +62,7 @@ static void gic_check_cpu_features(void)
 
 union gic_base {
 	void __iomem *common_base;
-	void __percpu * __iomem *percpu_base;
+	void __iomem * __percpu *percpu_base;
 };
 
 struct gic_chip_data {
-- 
2.39.5

[PATCH AUTOSEL 5.15 9/9] ARC: build: Try to guess GCC variant of cross compiler

[Sasha Levin]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit 824927e88456331c7a999fdf5d9d27923b619590 ]

ARC GCC compiler is packaged starting from Fedora 39i and the GCC
variant of cross compile tools has arc-linux-gnu- prefix and not
arc-linux-. This is causing that CROSS_COMPILE variable is left unset.

This change allows builds without need to supply CROSS_COMPILE argument
if distro package is used.

Before this change:
$ make -j 128 ARCH=arc W=1 drivers/infiniband/hw/mlx4/
  gcc: warning: ‘-mcpu=’ is deprecated; use ‘-mtune=’ or ‘-march=’ instead
  gcc: error: unrecognized command-line option ‘-mmedium-calls’
  gcc: error: unrecognized command-line option ‘-mlock’
  gcc: error: unrecognized command-line option ‘-munaligned-access’

[1] https://packages.fedoraproject.org/pkgs/cross-gcc/gcc-arc-linux-gnu/index.html
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 8782a03f24a8..60b7a7723b1e 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -6,7 +6,7 @@
 KBUILD_DEFCONFIG := haps_hs_smp_defconfig
 
 ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
+CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux- arc-linux-gnu-)
 endif
 
 cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
-- 
2.39.5