[PATCH v6 0/2] arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2

[PATCH v6 0/2] arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2

[Ivan Sergeev]

BigTreeTech CB2 and Pi2 are Rockchip RK3566 SoM and SBC boards made by
BigTreeTech for the intent of using as a 3d printer control board.
It is a successor to the Allwinner H616-based BigTreeTech CB1 and Pi, so
the device trees for CB2 and Pi2 are also done in the same manner: the
common nodes and properties are put into a dtsi file that the
board-specific device trees include.

Changes in v6:
- Fixed node names missed in v5
- Link to v5: https://lore.kernel.org/r/20250105-bigtreetech-cb2-v5-0-923f911b10c0@gmail.com

Changes in v5:
- Applied requested changes
- Fixed usb `phy-supply` format
- Removed improperly named pinctrl nodes that were unused.
- Fixed names of other pinctrl nodes
- Link to v4: https://lore.kernel.org/r/20241230-bigtreetech-cb2-v4-0-26d2d30e07ce@gmail.com

Changes in v4:
- Removed invalid `i2c,ignore-nak` properties
- Set `#address-cells` and `size-cells` on `sdmmc1`
- Fixed `phy-supply` properties of usb host nodes
- Link to v3: https://lore.kernel.org/r/20241227-bigtreetech-cb2-v3-0-91c556adcffe@gmail.com

Changes in v3:
- Proper formatting and patch series sending (using b4)
- Converted spaces to tab indentation in the dtsi file
- Fixed empty line where the license identifier should be
- Link to v2 1/2: https://lore.kernel.org/linux-rockchip/20241224135751.350379-2-ivan8215145640@gmail.com/
- Link to v2 2/2: https://lore.kernel.org/linux-rockchip/20241224140057.350667-2-ivan8215145640@gmail.com/

Changes in v2:
- Added bigtreetech cb2 and pi2 boards to the list of platforms
- Split BigTreeTech CB2 and Pi2 into two device trees using common dtsi
- Link to v1: https://lore.kernel.org/linux-rockchip/20241222203952.84217-2-ivan8215145640@gmail.com/

Signed-off-by: Ivan Sergeev <ivan8215145640@gmail.com>
---
Ivan Sergeev (2):
      dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2
      arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2

 .../devicetree/bindings/arm/rockchip.yaml          |  11 +
 arch/arm64/boot/dts/rockchip/Makefile              |   2 +
 .../dts/rockchip/rk3566-bigtreetech-cb2-manta.dts  |  10 +
 .../boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi  | 919 +++++++++++++++++++++
 .../boot/dts/rockchip/rk3566-bigtreetech-pi2.dts   |  10 +
 5 files changed, 952 insertions(+)
---
base-commit: 63676eefb7a026d04b51dcb7aaf54f358517a2ec
change-id: 20241224-bigtreetech-cb2-18944b349916

Best regards,
-- 
Ivan Sergeev <ivan8215145640@gmail.com>

[PATCH v6 1/2] dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2

[Ivan Sergeev]

BigTreeTech CB2 and Pi2 are Rockchip RK3566 based boards

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ivan Sergeev <ivan8215145640@gmail.com>
---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 753199a12923fadaa48c407a8e55e7854db7203e..349453b1676bfac45abf5cd49d6bd9f847281213 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -81,6 +81,17 @@ properties:
           - const: azw,beelink-a1
           - const: rockchip,rk3328
 
+      - description: BigTreeTech CB2 Manta M4/8P
+        items:
+          - const: bigtreetech,cb2-manta
+          - const: bigtreetech,cb2
+          - const: rockchip,rk3566
+
+      - description: BigTreeTech Pi 2
+        items:
+          - const: bigtreetech,pi2
+          - const: rockchip,rk3566
+
       - description: bq Curie 2 tablet
         items:
           - const: mundoreader,bq-curie2

-- 
2.45.2

[PATCH v6 2/2] arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2

[Ivan Sergeev]

BigTreeTech CB2 and Pi2 share a lot of hardware configuration, so a
common dtsi file was used to define common nodes and properties. This is
similar to how BigTreeTech CB1 and Pi are implemented.

Signed-off-by: Ivan Sergeev <ivan8215145640@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile              |   2 +
 .../dts/rockchip/rk3566-bigtreetech-cb2-manta.dts  |  10 +
 .../boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi  | 919 +++++++++++++++++++++
 .../boot/dts/rockchip/rk3566-bigtreetech-pi2.dts   |  10 +
 4 files changed, 941 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 86cc418a2255cdc22f1d503e9519d2d9572d4e9d..99266316a6003e5a8a4dadbd05b8453beb2c3efc 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -111,6 +111,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lckfb-tspi.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-nanopi-r3s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-bigtreetech-cb2-manta.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-bigtreetech-pi2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2-manta.dts b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2-manta.dts
new file mode 100644
index 0000000000000000000000000000000000000000..97415d099d886aba97c9b652af3d03573f5e74d7
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2-manta.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-bigtreetech-cb2.dtsi"
+
+/ {
+	model = "BigTreeTech CB2";
+	compatible = "bigtreetech,cb2-manta", "bigtreetech,cb2", "rockchip,rk3566";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..0334e5c2dae1a5e7a2b8aa61aca18f46a81250dc
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi
@@ -0,0 +1,919 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3566.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		pwms = <&pwm7 0 50000 0>;
+		cooling-levels = <0 50 100 150 200 255>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 =<&blue_led>;
+		};
+
+		led-1 {
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 =<&heartbeat_led>;
+		};
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Analog RK809";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc3v3_pcie: regulator-vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		enable-active-high;
+		gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_drv>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vbus>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vbus>;
+	};
+
+	vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vbus>;
+	};
+
+	vcc_sd: regulator-vcc-sd {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "vcc_sd";
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host3";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_otg: regulator-vcc5v0-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_otg_en>;
+		regulator-name = "vcc5v0_otg3";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_usb2t: regulator-vcc5v0-usb2t {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb2t_en>;
+		regulator-name = "vcc5v0_usb2t";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_usb2b: regulator-vcc5v0-usb2b {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb2b_en>;
+		regulator-name = "vcc5v0_usb2b";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	ext_cam_clk: ext-cam-clk {
+		status = "okay";
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+		clock-output-names = "ext_cam_clk";
+		#clock-cells = <0>;
+	};
+
+	can_mcp2515_osc: can-mcp2515-osc {
+		compatible = "fixed-clock";
+		clock-frequency = <8000000>;
+		#clock-cells = <0>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "input";
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m0_miim
+			&gmac1m0_tx_bus2
+			&gmac1m0_rx_bus2
+			&gmac1m0_rgmii_clk
+			&gmac1m0_clkinout
+			&gmac1m0_rgmii_bus>;
+	phy-handle = <&rgmii_phy0>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy0: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <20000>;
+		reset-post-delay-us = <100000>;
+		reg = <0x0>;
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		vin-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-initial-mode = <1>;
+		regulator-ramp-delay = <2300>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default", "pmic-sleep",
+				"pmic-power-off", "pmic-reset";
+		pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
+		#sound-dai-cells = <0>;
+
+		system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_npu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_image";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_image";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc3v3_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2m1_xfer>;
+};
+
+&i2c3 {
+	status = "okay";
+
+	tft_tp: touchscreen@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		status = "okay";
+		ti,x-plate-ohms = <660>;
+		ti,rt-thr = <3000>;
+		ti,fuzzx = <32>;
+		ti,fuzzy = <16>;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
+
+	can_mcp2515: can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0x00>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <10000000>;
+		clocks = <&can_mcp2515_osc>;
+		vdd-supply = <&vcc3v3_sys>;
+		xceiver-supply = <&vcc3v3_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcp2515_int_pin>;
+	};
+};
+
+&spi3 {
+	pinctrl-0 = <&spi3m1_cs0 &spi3m1_pins>;
+};
+
+&pcie2x1 {
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	sd {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc-slppin-gpio {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_slp: soc-slppin-slp {
+			rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>;
+		};
+
+		soc_slppin_rst: soc-slppin-rst {
+			rockchip,pins = <0 RK_PA2 2 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake: wifi-host-wake-l {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb2t_en: vcc5v0-usb2t-en {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb2b_en: vcc5v0-usb2b-en {
+			rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	work-led {
+		heartbeat_led: led-heartbeat {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		blue_led: led-blue {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	pcie {
+		pcie_drv: pcie-drv {
+			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	edp {
+		edp_hpd: edp-hpd {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bl_en: bl-en {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	bt {
+		bt_enable: bt-enable-h {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_host_wake: bt-host-wake-l {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake: bt-wake-l {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	mcp2515_int_pin {
+		mcp2515_int_pin: mcp2515-int-pin {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0m1_pins>;
+};
+
+&pwm7 {
+	status = "disabled";
+};
+
+&pwm12 {
+	pinctrl-0 = <&pwm12m1_pins>;
+};
+
+&pwm13 {
+	pinctrl-0 = <&pwm13m1_pins>;
+};
+
+&pwm14 {
+	pinctrl-0 = <&pwm14m1_pins>;
+};
+
+&pwm15 {
+	pinctrl-0 = <&pwm15m1_pins>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcca_1v8>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	max-frequency = <150000000>;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	/* WiFi & BT combo module AMPAK AP6256 */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	max-frequency = <150000000>;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	rockchip,default-sample-phase = <90>;
+	status = "okay";
+
+	sdio-wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake>;
+		brcm,drive-strength = <10>;
+	};
+};
+
+&sfc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+	uart-has-rtscts;
+	dma-names = "tx","rx";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca1v8_pmu>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-0 = <&uart5m1_xfer>;
+};
+
+&uart7 {
+	pinctrl-0 = <&uart7m2_xfer>;
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb2t>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb2b>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	extcon = <&usb2phy0>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-pi2.dts b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-pi2.dts
new file mode 100644
index 0000000000000000000000000000000000000000..7cd444caa18bc9f6cf7afe04a777aecdce2fc93e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-pi2.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-bigtreetech-cb2.dtsi"
+
+/ {
+	model = "BigTreeTech Pi 2";
+	compatible = "bigtreetech,pi2", "rockchip,rk3566";
+};

-- 
2.45.2

Re: [PATCH v6 0/2] arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2

[Rob Herring (Arm)]

On Sun, 05 Jan 2025 13:40:29 +0300, Ivan Sergeev wrote:
> BigTreeTech CB2 and Pi2 are Rockchip RK3566 SoM and SBC boards made by
> BigTreeTech for the intent of using as a 3d printer control board.
> It is a successor to the Allwinner H616-based BigTreeTech CB1 and Pi, so
> the device trees for CB2 and Pi2 are also done in the same manner: the
> common nodes and properties are put into a dtsi file that the
> board-specific device trees include.
> 
> Changes in v6:
> - Fixed node names missed in v5
> - Link to v5: https://lore.kernel.org/r/20250105-bigtreetech-cb2-v5-0-923f911b10c0@gmail.com
> 
> Changes in v5:
> - Applied requested changes
> - Fixed usb `phy-supply` format
> - Removed improperly named pinctrl nodes that were unused.
> - Fixed names of other pinctrl nodes
> - Link to v4: https://lore.kernel.org/r/20241230-bigtreetech-cb2-v4-0-26d2d30e07ce@gmail.com
> 
> Changes in v4:
> - Removed invalid `i2c,ignore-nak` properties
> - Set `#address-cells` and `size-cells` on `sdmmc1`
> - Fixed `phy-supply` properties of usb host nodes
> - Link to v3: https://lore.kernel.org/r/20241227-bigtreetech-cb2-v3-0-91c556adcffe@gmail.com
> 
> Changes in v3:
> - Proper formatting and patch series sending (using b4)
> - Converted spaces to tab indentation in the dtsi file
> - Fixed empty line where the license identifier should be
> - Link to v2 1/2: https://lore.kernel.org/linux-rockchip/20241224135751.350379-2-ivan8215145640@gmail.com/
> - Link to v2 2/2: https://lore.kernel.org/linux-rockchip/20241224140057.350667-2-ivan8215145640@gmail.com/
> 
> Changes in v2:
> - Added bigtreetech cb2 and pi2 boards to the list of platforms
> - Split BigTreeTech CB2 and Pi2 into two device trees using common dtsi
> - Link to v1: https://lore.kernel.org/linux-rockchip/20241222203952.84217-2-ivan8215145640@gmail.com/
> 
> Signed-off-by: Ivan Sergeev <ivan8215145640@gmail.com>
> ---
> Ivan Sergeev (2):
>       dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2
>       arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2
> 
>  .../devicetree/bindings/arm/rockchip.yaml          |  11 +
>  arch/arm64/boot/dts/rockchip/Makefile              |   2 +
>  .../dts/rockchip/rk3566-bigtreetech-cb2-manta.dts  |  10 +
>  .../boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi  | 919 +++++++++++++++++++++
>  .../boot/dts/rockchip/rk3566-bigtreetech-pi2.dts   |  10 +
>  5 files changed, 952 insertions(+)
> ---
> base-commit: 63676eefb7a026d04b51dcb7aaf54f358517a2ec
> change-id: 20241224-bigtreetech-cb2-18944b349916
> 
> Best regards,
> --
> Ivan Sergeev <ivan8215145640@gmail.com>
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y rockchip/rk3566-bigtreetech-cb2-manta.dtb rockchip/rk3566-bigtreetech-pi2.dtb' for 20250105-bigtreetech-cb2-v6-0-ee7bc9c4df46@gmail.com:

arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2-manta.dtb: /i2c@fe5c0000/touchscreen@48: failed to match any schema with compatible: ['ti,tsc2007']
arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-pi2.dtb: /i2c@fe5c0000/touchscreen@48: failed to match any schema with compatible: ['ti,tsc2007']
arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-pi2.dtb: pmic: soc-slppin-gpio: {'rockchip,pins': [[0, 2, 0, 196]]} is not of type 'array'
	from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2-manta.dtb: pmic: soc-slppin-gpio: {'rockchip,pins': [[0, 2, 0, 196]]} is not of type 'array'
	from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#