From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: En-Wei Wu <en-wei.wu@canonical.com>,
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>,
Sasha Levin <sashal@kernel.org>,
marcel@holtmann.org, luiz.dentz@gmail.com,
linux-bluetooth@vger.kernel.org
Subject: [PATCH AUTOSEL 6.12 20/29] Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925
Date: Sun, 26 Jan 2025 10:02:01 -0500 [thread overview]
Message-ID: <20250126150210.955385-20-sashal@kernel.org> (raw)
In-Reply-To: <20250126150210.955385-1-sashal@kernel.org>
From: En-Wei Wu <en-wei.wu@canonical.com>
[ Upstream commit f63f401130e5c5cd0dd2f18c9df967ab75cd4732 ]
Add VID 13d3 & PID 3628 for MediaTek MT7925 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3628 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 86b75d26027b1..7cc0e0ca676cf 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -670,6 +670,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3608), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3628), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH },
/* Additional Realtek 8723AE Bluetooth devices */
{ USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
--
2.39.5
next prev parent reply other threads:[~2025-01-26 15:02 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-26 15:01 [PATCH AUTOSEL 6.12 01/29] wifi: rtw89: add crystal_cap check to avoid setting as overflow value Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 02/29] tun: fix group permission check Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 03/29] mmc: core: Respect quirk_max_rate for non-UHS SDIO card Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 04/29] mmc: sdhci-esdhc-imx: enable 'SDHCI_QUIRK_NO_LED' quirk for S32G Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 05/29] Revert "HID: multitouch: Add support for lenovo Y9000P Touchpad" Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 06/29] wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 07/29] tomoyo: don't emit warning in tomoyo_write_control() Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 08/29] mfd: lpc_ich: Add another Gemini Lake ISA bridge PCI device-id Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 09/29] wifi: rtw88: add __packed attribute to efuse layout struct Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 10/29] clk: qcom: Make GCC_8150 depend on QCOM_GDSC Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 11/29] HID: multitouch: Add quirk for Hantick 5288 touchpad Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 12/29] HID: Wacom: Add PCI Wacom device support Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 13/29] net/mlx5: use do_aux_work for PHC overflow checks Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 14/29] wifi: brcmfmac: Check the return value of of_property_read_string_index() Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 15/29] wifi: iwlwifi: pcie: Add support for new device ids Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 16/29] wifi: iwlwifi: avoid memory leak Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 17/29] i2c: Force ELAN06FA touchpad I2C bus freq to 100KHz Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 18/29] APEI: GHES: Have GHES honor the panic= setting Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 19/29] Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922 Sasha Levin
2025-01-26 15:02 ` Sasha Levin [this message]
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 21/29] Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 22/29] net: wwan: iosm: Fix hibernation by re-binding the driver around it Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 23/29] HID: hid-asus: Disable OOBE mode on the ProArt P16 Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 24/29] mmc: sdhci-msm: Correctly set the load for the regulator Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 25/29] octeon_ep: update tx/rx stats locally for persistence Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 26/29] octeon_ep_vf: " Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 27/29] tipc: re-order conditions in tipc_crypto_key_rcv() Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 28/29] selftests/net/ipsec: Fix Null pointer dereference in rtattr_pack() Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 29/29] net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250126150210.955385-20-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=en-wei.wu@canonical.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=luiz.von.dentz@intel.com \
--cc=marcel@holtmann.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®