From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Ping-Ke Shih <pkshih@realtek.com>,
kernel test robot <lkp@intel.com>,
Sasha Levin <sashal@kernel.org>,
kvalo@kernel.org, linux-wireless@vger.kernel.org
Subject: [PATCH AUTOSEL 6.12 09/29] wifi: rtw88: add __packed attribute to efuse layout struct
Date: Sun, 26 Jan 2025 10:01:50 -0500 [thread overview]
Message-ID: <20250126150210.955385-9-sashal@kernel.org> (raw)
In-Reply-To: <20250126150210.955385-1-sashal@kernel.org>
From: Ping-Ke Shih <pkshih@realtek.com>
[ Upstream commit 0daa521a1c8c29ffbefe6530f0d276e74e2749d0 ]
The layout struct of efuse should not do address alignment by compiler.
Otherwise it leads unexpected layout and size for certain arch suc as arm.
In x86-64, the results are identical before and after this patch.
Also adjust bit-field to prevent over adjacent byte to avoid warning:
rtw88/rtw8822b.h:66:1: note: offset of packed bit-field `res2` has changed in GCC 4.4
66 | } __packed;
| ^
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412120131.qk0x6OhE-lkp@intel.com/
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241212054203.135046-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtw88/main.h | 4 ++--
drivers/net/wireless/realtek/rtw88/rtw8723x.h | 8 ++++----
drivers/net/wireless/realtek/rtw88/rtw8821c.h | 9 +++++----
drivers/net/wireless/realtek/rtw88/rtw8822b.h | 9 +++++----
drivers/net/wireless/realtek/rtw88/rtw8822c.h | 9 +++++----
5 files changed, 21 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/main.h b/drivers/net/wireless/realtek/rtw88/main.h
index 945117afe1438..c808bb271e9d0 100644
--- a/drivers/net/wireless/realtek/rtw88/main.h
+++ b/drivers/net/wireless/realtek/rtw88/main.h
@@ -508,12 +508,12 @@ struct rtw_5g_txpwr_idx {
struct rtw_5g_vht_ns_pwr_idx_diff vht_2s_diff;
struct rtw_5g_vht_ns_pwr_idx_diff vht_3s_diff;
struct rtw_5g_vht_ns_pwr_idx_diff vht_4s_diff;
-};
+} __packed;
struct rtw_txpwr_idx {
struct rtw_2g_txpwr_idx pwr_idx_2g;
struct rtw_5g_txpwr_idx pwr_idx_5g;
-};
+} __packed;
struct rtw_channel_params {
u8 center_chan;
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8723x.h b/drivers/net/wireless/realtek/rtw88/rtw8723x.h
index e93bfce994bf8..a99af527c92cf 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8723x.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw8723x.h
@@ -47,7 +47,7 @@ struct rtw8723xe_efuse {
u8 device_id[2];
u8 sub_vendor_id[2];
u8 sub_device_id[2];
-};
+} __packed;
struct rtw8723xu_efuse {
u8 res4[48]; /* 0xd0 */
@@ -56,12 +56,12 @@ struct rtw8723xu_efuse {
u8 usb_option; /* 0x104 */
u8 res5[2]; /* 0x105 */
u8 mac_addr[ETH_ALEN]; /* 0x107 */
-};
+} __packed;
struct rtw8723xs_efuse {
u8 res4[0x4a]; /* 0xd0 */
u8 mac_addr[ETH_ALEN]; /* 0x11a */
-};
+} __packed;
struct rtw8723x_efuse {
__le16 rtl_id;
@@ -96,7 +96,7 @@ struct rtw8723x_efuse {
struct rtw8723xu_efuse u;
struct rtw8723xs_efuse s;
};
-};
+} __packed;
#define RTW8723X_IQK_ADDA_REG_NUM 16
#define RTW8723X_IQK_MAC8_REG_NUM 3
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821c.h b/drivers/net/wireless/realtek/rtw88/rtw8821c.h
index 91ed921407bbe..10172f4d74bf2 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8821c.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw8821c.h
@@ -27,7 +27,7 @@ struct rtw8821cu_efuse {
u8 res11[0xcf];
u8 package_type; /* 0x1fb */
u8 res12[0x4];
-};
+} __packed;
struct rtw8821ce_efuse {
u8 mac_addr[ETH_ALEN]; /* 0xd0 */
@@ -47,7 +47,8 @@ struct rtw8821ce_efuse {
u8 ltr_en:1;
u8 res1:2;
u8 obff:2;
- u8 res2:3;
+ u8 res2_1:1;
+ u8 res2_2:2;
u8 obff_cap:2;
u8 res3:4;
u8 res4[3];
@@ -63,7 +64,7 @@ struct rtw8821ce_efuse {
u8 res6:1;
u8 port_t_power_on_value:5;
u8 res7;
-};
+} __packed;
struct rtw8821cs_efuse {
u8 res4[0x4a]; /* 0xd0 */
@@ -101,7 +102,7 @@ struct rtw8821c_efuse {
struct rtw8821cu_efuse u;
struct rtw8821cs_efuse s;
};
-};
+} __packed;
static inline void
_rtw_write32s_mask(struct rtw_dev *rtwdev, u32 addr, u32 mask, u32 data)
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.h b/drivers/net/wireless/realtek/rtw88/rtw8822b.h
index cf85e63966a1c..e815bc97c218a 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822b.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.h
@@ -27,7 +27,7 @@ struct rtw8822bu_efuse {
u8 res11[0xcf];
u8 package_type; /* 0x1fb */
u8 res12[0x4];
-};
+} __packed;
struct rtw8822be_efuse {
u8 mac_addr[ETH_ALEN]; /* 0xd0 */
@@ -47,7 +47,8 @@ struct rtw8822be_efuse {
u8 ltr_en:1;
u8 res1:2;
u8 obff:2;
- u8 res2:3;
+ u8 res2_1:1;
+ u8 res2_2:2;
u8 obff_cap:2;
u8 res3:4;
u8 res4[3];
@@ -63,7 +64,7 @@ struct rtw8822be_efuse {
u8 res6:1;
u8 port_t_power_on_value:5;
u8 res7;
-};
+} __packed;
struct rtw8822bs_efuse {
u8 res4[0x4a]; /* 0xd0 */
@@ -103,7 +104,7 @@ struct rtw8822b_efuse {
struct rtw8822bu_efuse u;
struct rtw8822bs_efuse s;
};
-};
+} __packed;
static inline void
_rtw_write32s_mask(struct rtw_dev *rtwdev, u32 addr, u32 mask, u32 data)
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.h b/drivers/net/wireless/realtek/rtw88/rtw8822c.h
index e2b383d633cd2..fc62b67a15f21 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.h
@@ -14,7 +14,7 @@ struct rtw8822cu_efuse {
u8 res1[3];
u8 mac_addr[ETH_ALEN]; /* 0x157 */
u8 res2[0x3d];
-};
+} __packed;
struct rtw8822cs_efuse {
u8 res0[0x4a]; /* 0x120 */
@@ -39,7 +39,8 @@ struct rtw8822ce_efuse {
u8 ltr_en:1;
u8 res1:2;
u8 obff:2;
- u8 res2:3;
+ u8 res2_1:1;
+ u8 res2_2:2;
u8 obff_cap:2;
u8 res3:4;
u8 class_code[3];
@@ -55,7 +56,7 @@ struct rtw8822ce_efuse {
u8 res6:1;
u8 port_t_power_on_value:5;
u8 res7;
-};
+} __packed;
struct rtw8822c_efuse {
__le16 rtl_id;
@@ -102,7 +103,7 @@ struct rtw8822c_efuse {
struct rtw8822cu_efuse u;
struct rtw8822cs_efuse s;
};
-};
+} __packed;
enum rtw8822c_dpk_agc_phase {
RTW_DPK_GAIN_CHECK,
--
2.39.5
next prev parent reply other threads:[~2025-01-26 15:02 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-26 15:01 [PATCH AUTOSEL 6.12 01/29] wifi: rtw89: add crystal_cap check to avoid setting as overflow value Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 02/29] tun: fix group permission check Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 03/29] mmc: core: Respect quirk_max_rate for non-UHS SDIO card Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 04/29] mmc: sdhci-esdhc-imx: enable 'SDHCI_QUIRK_NO_LED' quirk for S32G Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 05/29] Revert "HID: multitouch: Add support for lenovo Y9000P Touchpad" Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 06/29] wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 07/29] tomoyo: don't emit warning in tomoyo_write_control() Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 08/29] mfd: lpc_ich: Add another Gemini Lake ISA bridge PCI device-id Sasha Levin
2025-01-26 15:01 ` Sasha Levin [this message]
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 10/29] clk: qcom: Make GCC_8150 depend on QCOM_GDSC Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 11/29] HID: multitouch: Add quirk for Hantick 5288 touchpad Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 12/29] HID: Wacom: Add PCI Wacom device support Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 13/29] net/mlx5: use do_aux_work for PHC overflow checks Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 14/29] wifi: brcmfmac: Check the return value of of_property_read_string_index() Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 15/29] wifi: iwlwifi: pcie: Add support for new device ids Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 16/29] wifi: iwlwifi: avoid memory leak Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 17/29] i2c: Force ELAN06FA touchpad I2C bus freq to 100KHz Sasha Levin
2025-01-26 15:01 ` [PATCH AUTOSEL 6.12 18/29] APEI: GHES: Have GHES honor the panic= setting Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 19/29] Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922 Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 20/29] Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925 Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 21/29] Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 22/29] net: wwan: iosm: Fix hibernation by re-binding the driver around it Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 23/29] HID: hid-asus: Disable OOBE mode on the ProArt P16 Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 24/29] mmc: sdhci-msm: Correctly set the load for the regulator Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 25/29] octeon_ep: update tx/rx stats locally for persistence Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 26/29] octeon_ep_vf: " Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 27/29] tipc: re-order conditions in tipc_crypto_key_rcv() Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 28/29] selftests/net/ipsec: Fix Null pointer dereference in rtattr_pack() Sasha Levin
2025-01-26 15:02 ` [PATCH AUTOSEL 6.12 29/29] net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250126150210.955385-9-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lkp@intel.com \
--cc=pkshih@realtek.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®