From: Fred Treven <ftreven@opensource.cirrus.com>
To: Lee Jones <lee@kernel.org>, Rob Herring <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
"Fred Treven" <ftreven@opensource.cirrus.com>,
<patches@opensource.cirrus.com>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 4/7] dt-bindings: mfd: cirrus,cs40l26: Support for CS40L26
Date: Fri, 31 Jan 2025 13:56:35 -0600 [thread overview]
Message-ID: <20250131195639.1784933-5-ftreven@opensource.cirrus.com> (raw)
In-Reply-To: <20250131195639.1784933-1-ftreven@opensource.cirrus.com>
Introduce required basic devicetree parameters for the
initial commit of CS40L26.
Signed-off-by: Fred Treven <ftreven@opensource.cirrus.com>
---
.../bindings/mfd/cirrus,cs40l26.yaml | 81 +++++++++++++++++++
MAINTAINERS | 4 +-
2 files changed, 83 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/cirrus,cs40l26.yaml
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,cs40l26.yaml b/Documentation/devicetree/bindings/mfd/cirrus,cs40l26.yaml
new file mode 100644
index 000000000000..a3cccb1a2d92
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/cirrus,cs40l26.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/cirrus,cs40l26.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS40L26 Boosted Haptic Amplifier
+
+maintainers:
+ - Fred Treven <ftreven@opensource.cirrus.com>
+ - patches@opensource.cirrus.com
+
+description:
+ CS40L26 is a Boosted Haptic Driver with Integrated DSP, Waveform Memory,
+ Advanced Closed Loop Algorithms, and LRA protection
+
+properties:
+ compatible:
+ enum:
+ - cirrus,cs40l26a
+ - cirrus,cs40l27b
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ va-supply:
+ description: Regulator for VA analog voltage
+
+ vp-supply:
+ description: Regulator for VP voltage
+
+ cirrus,bst-ipk-microamp:
+ description:
+ Maximum current that can be drawn by the device's boost converter.
+ multipleOf: 50000
+ minimum: 1600000
+ maximum: 4800000
+ default: 4500000
+
+ cirrus,bst-ctl-microvolt:
+ description: Maximum target voltage to which DSP may increase the VBST supply.
+ multipleOf: 50000
+ minimum: 2550000
+ maximum: 11000000
+ default: 11000000
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ haptic-driver@58 {
+ compatible = "cirrus,cs40l26a";
+ reg = <0x58>;
+ interrupt-parent = <&gpio>;
+ interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+ va-supply = <&vreg>;
+ vp-supply = <&vreg>;
+ cirrus,bst-ctl-microvolt = <2600000>;
+ cirrus,bst-ipk-microamp = <1650000>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index bc8ce7af3303..9c4105bf0a32 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5546,11 +5546,11 @@ F: sound/soc/codecs/cs*
CIRRUS LOGIC HAPTIC DRIVERS
M: James Ogletree <jogletre@opensource.cirrus.com>
-M: Fred Treven <fred.treven@cirrus.com>
+M: Fred Treven <ftreven@opensource.cirrus.com>
M: Ben Bright <ben.bright@cirrus.com>
L: patches@opensource.cirrus.com
S: Supported
-F: Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml
+F: Documentation/devicetree/bindings/input/cirrus,cs40l*
F: drivers/input/misc/cs40l*
F: drivers/mfd/cs40l*
F: include/linux/mfd/cs40l*
--
2.34.1
next prev parent reply other threads:[~2025-01-31 20:01 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20250131195639.1784933-1-ftreven@opensource.cirrus.com>
2025-01-31 19:56 ` [PATCH 1/7] firmware: cs_dsp: Fix error checking in wseq_write() Fred Treven
2025-02-02 17:34 ` Markus Elfring
2025-02-04 10:03 ` Charles Keepax
2025-01-31 19:56 ` [PATCH 2/7] firmware: cs_dsp: Check for valid num_regs in cs_dsp_wseq_multi_write() Fred Treven
2025-02-04 10:06 ` Charles Keepax
2025-02-04 21:51 ` Fredrik Treven
2025-01-31 19:56 ` [PATCH 3/7] firmware: cs_dsp: Add ability to load multiple coefficient files Fred Treven
2025-02-04 10:10 ` Charles Keepax
2025-02-04 22:05 ` Fredrik Treven
2025-01-31 19:56 ` Fred Treven [this message]
2025-02-02 14:04 ` [PATCH 4/7] dt-bindings: mfd: cirrus,cs40l26: Support for CS40L26 Krzysztof Kozlowski
2025-02-04 22:18 ` Fredrik Treven
2025-02-05 7:29 ` Krzysztof Kozlowski
2025-01-31 19:56 ` [PATCH 5/7] mfd: cs40l26: Add support for CS40L26 core driver Fred Treven
2025-01-31 19:56 ` [PATCH 6/7] ASoC: cs40l26: Support I2S streaming to CS40L26 Fred Treven
2025-02-03 12:23 ` Mark Brown
2025-02-04 21:54 ` Fredrik Treven
2025-01-31 19:56 ` [PATCH 7/7] Input: cs40l26 - Add support for CS40L26 haptic driver Fred Treven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250131195639.1784933-5-ftreven@opensource.cirrus.com \
--to=ftreven@opensource.cirrus.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®