From: Jerome Brunet <jbrunet@baylibre.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Dave Ertman <david.m.ertman@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Stephen Boyd <sboyd@kernel.org>, Arnd Bergmann <arnd@arndb.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>, linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/7] driver core: auxiliary bus: add device creation helper
Date: Thu, 6 Feb 2025 19:23:10 +0100 [thread overview]
Message-ID: <20250206-aux-device-create-helper-v2-0-fa6a0f326527@baylibre.com> (raw)
The suggestion for this change was initially discussed here: [1]
This patchset adds and use a helper to create a simple auxiliary device.
The goal is to remove boilerplate code that tends to get repeated for
simple cases.
Only the last change was tested on actual HW. The other usage of the helper
have only been compile tested with x64_64 allmodconfig. There are many other
simple cases of auxiliary device creation but those tend to use the
'container_of' trick to allocate the auxiliary device. It is possible to
convert these drivers to use the provided helper but the conversion is
slightly more complex.
[1]: https://lore.kernel.org/linux-clk/df0a53ee859e450d84e81547099f5f36.sboyd@kernel.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
Changes in v2:
- Add usage examples, as requested.
- Add 'id' as function parameter: Adding the example usage showed that
handling IDA allocation was not appropriate and making the usage more
complex for simple use case.
- Also add 'modname' as parameter: Most driver have been using
KBUILD_MODNAME and this actually rarely align with the driver name.
- Link to v1: https://lore.kernel.org/r/20241210-aux-device-create-helper-v1-1-5887f4d89308@baylibre.com
---
Jerome Brunet (7):
driver core: auxiliary bus: add device creation helper
reset: mpfs: use the auxiliary device creation helper
drm/bridge: ti-sn65dsi86: use the auxiliary device creation helper
platform: arm64: lenovo-yoga-c630: use the auxiliary device creation helper
clk: eyeq: use the auxiliary device creation helper
clk: clk-imx8mp-audiomix: use the auxiliary device creation helper
clk: amlogic: axg-audio: use the auxiliary reset driver - take 2
drivers/base/auxiliary.c | 88 +++++++++++++++++++++++
drivers/clk/clk-eyeq.c | 57 ++++-----------
drivers/clk/imx/clk-imx8mp-audiomix.c | 57 ++-------------
drivers/clk/meson/Kconfig | 2 +-
drivers/clk/meson/axg-audio.c | 114 ++++--------------------------
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 88 +++++++----------------
drivers/platform/arm64/lenovo-yoga-c630.c | 43 ++---------
drivers/reset/reset-mpfs.c | 53 ++------------
include/linux/auxiliary_bus.h | 6 ++
9 files changed, 160 insertions(+), 348 deletions(-)
---
base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b
change-id: 20241210-aux-device-create-helper-93141524e523
Best regards,
--
Jerome
next reply other threads:[~2025-02-06 18:23 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-06 18:23 Jerome Brunet [this message]
2025-02-06 18:23 ` [PATCH v2 1/7] " Jerome Brunet
2025-02-07 2:32 ` Ira Weiny
2025-02-11 17:27 ` Jerome Brunet
2025-02-06 18:23 ` [PATCH v2 2/7] reset: mpfs: use the auxiliary " Jerome Brunet
2025-02-06 18:23 ` [PATCH v2 3/7] drm/bridge: ti-sn65dsi86: " Jerome Brunet
2025-02-06 18:23 ` [PATCH v2 4/7] platform: arm64: lenovo-yoga-c630: " Jerome Brunet
2025-02-06 18:23 ` [PATCH v2 5/7] clk: eyeq: " Jerome Brunet
2025-02-06 18:23 ` [PATCH v2 6/7] clk: clk-imx8mp-audiomix: " Jerome Brunet
2025-02-12 7:26 ` Dan Carpenter
2025-02-12 10:16 ` Jerome Brunet
2025-02-06 18:23 ` [PATCH v2 7/7] clk: amlogic: axg-audio: use the auxiliary reset driver - take 2 Jerome Brunet
2025-02-06 18:32 ` [PATCH v2 0/7] driver core: auxiliary bus: add device creation helper Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250206-aux-device-create-helper-v2-0-fa6a0f326527@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=arnd@arndb.de \
--cc=david.m.ertman@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=ira.weiny@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®