From: Jerome Brunet <jbrunet@baylibre.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Dave Ertman <david.m.ertman@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Stephen Boyd <sboyd@kernel.org>, Arnd Bergmann <arnd@arndb.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/7] drm/bridge: ti-sn65dsi86: use the auxiliary device creation helper
Date: Thu, 6 Feb 2025 19:23:13 +0100 [thread overview]
Message-ID: <20250206-aux-device-create-helper-v2-3-fa6a0f326527@baylibre.com> (raw)
In-Reply-To: <20250206-aux-device-create-helper-v2-0-fa6a0f326527@baylibre.com>
The auxiliary device creation of this driver is simple enough to
use the available auxiliary device creation helper.
Use it and remove some boilerplate code.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 88 ++++++++++-------------------------
1 file changed, 24 insertions(+), 64 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index e4d9006b59f1b975cf63e26b221e985206caf867..bd618f497a3f0e1d08e46e98deea3de7d7db8bd5 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -454,62 +454,6 @@ static void ti_sn65dsi86_debugfs_init(struct ti_sn65dsi86 *pdata)
debugfs_create_file("status", 0600, debugfs, pdata, &status_fops);
}
-/* -----------------------------------------------------------------------------
- * Auxiliary Devices (*not* AUX)
- */
-
-static void ti_sn65dsi86_uninit_aux(void *data)
-{
- auxiliary_device_uninit(data);
-}
-
-static void ti_sn65dsi86_delete_aux(void *data)
-{
- auxiliary_device_delete(data);
-}
-
-static void ti_sn65dsi86_aux_device_release(struct device *dev)
-{
- struct auxiliary_device *aux = container_of(dev, struct auxiliary_device, dev);
-
- kfree(aux);
-}
-
-static int ti_sn65dsi86_add_aux_device(struct ti_sn65dsi86 *pdata,
- struct auxiliary_device **aux_out,
- const char *name)
-{
- struct device *dev = pdata->dev;
- struct auxiliary_device *aux;
- int ret;
-
- aux = kzalloc(sizeof(*aux), GFP_KERNEL);
- if (!aux)
- return -ENOMEM;
-
- aux->name = name;
- aux->dev.parent = dev;
- aux->dev.release = ti_sn65dsi86_aux_device_release;
- device_set_of_node_from_dev(&aux->dev, dev);
- ret = auxiliary_device_init(aux);
- if (ret) {
- kfree(aux);
- return ret;
- }
- ret = devm_add_action_or_reset(dev, ti_sn65dsi86_uninit_aux, aux);
- if (ret)
- return ret;
-
- ret = auxiliary_device_add(aux);
- if (ret)
- return ret;
- ret = devm_add_action_or_reset(dev, ti_sn65dsi86_delete_aux, aux);
- if (!ret)
- *aux_out = aux;
-
- return ret;
-}
-
/* -----------------------------------------------------------------------------
* AUX Adapter
*/
@@ -671,7 +615,13 @@ static int ti_sn_aux_probe(struct auxiliary_device *adev,
* The eDP to MIPI bridge parts don't work until the AUX channel is
* setup so we don't add it in the main driver probe, we add it now.
*/
- return ti_sn65dsi86_add_aux_device(pdata, &pdata->bridge_aux, "bridge");
+ pdata->bridge_aux = devm_auxiliary_device_create(pdata->dev,
+ KBUILD_MODNAME,
+ "bridge", NULL, 0);
+ if (IS_ERR(pdata->bridge_aux))
+ return PTR_ERR(pdata->bridge_aux);
+
+ return 0;
}
static const struct auxiliary_device_id ti_sn_aux_id_table[] = {
@@ -1950,15 +1900,19 @@ static int ti_sn65dsi86_probe(struct i2c_client *client)
*/
if (IS_ENABLED(CONFIG_OF_GPIO)) {
- ret = ti_sn65dsi86_add_aux_device(pdata, &pdata->gpio_aux, "gpio");
- if (ret)
- return ret;
+ pdata->gpio_aux = devm_auxiliary_device_create(pdata->dev,
+ KBUILD_MODNAME,
+ "gpio", NULL, 0);
+ if (IS_ERR(pdata->gpio_aux))
+ return PTR_ERR(pdata->gpio_aux);
}
if (IS_ENABLED(CONFIG_PWM)) {
- ret = ti_sn65dsi86_add_aux_device(pdata, &pdata->pwm_aux, "pwm");
- if (ret)
- return ret;
+ pdata->pwm_aux = devm_auxiliary_device_create(pdata->dev,
+ KBUILD_MODNAME,
+ "pwm", NULL, 0);
+ if (IS_ERR(pdata->pwm_aux))
+ return PTR_ERR(pdata->pwm_aux);
}
/*
@@ -1967,7 +1921,13 @@ static int ti_sn65dsi86_probe(struct i2c_client *client)
* AUX channel is there and this is a very simple solution to the
* dependency problem.
*/
- return ti_sn65dsi86_add_aux_device(pdata, &pdata->aux_aux, "aux");
+ pdata->aux_aux = devm_auxiliary_device_create(pdata->dev,
+ KBUILD_MODNAME,
+ "aux", NULL, 0);
+ if (IS_ERR(pdata->aux_aux))
+ return PTR_ERR(pdata->aux_aux);
+
+ return 0;
}
static const struct i2c_device_id ti_sn65dsi86_id[] = {
--
2.45.2
next prev parent reply other threads:[~2025-02-06 18:23 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-06 18:23 [PATCH v2 0/7] driver core: auxiliary bus: add " Jerome Brunet
2025-02-06 18:23 ` [PATCH v2 1/7] " Jerome Brunet
2025-02-07 2:32 ` Ira Weiny
2025-02-11 17:27 ` Jerome Brunet
2025-02-06 18:23 ` [PATCH v2 2/7] reset: mpfs: use the auxiliary " Jerome Brunet
2025-02-06 18:23 ` Jerome Brunet [this message]
2025-02-06 18:23 ` [PATCH v2 4/7] platform: arm64: lenovo-yoga-c630: " Jerome Brunet
2025-02-06 18:23 ` [PATCH v2 5/7] clk: eyeq: " Jerome Brunet
2025-02-06 18:23 ` [PATCH v2 6/7] clk: clk-imx8mp-audiomix: " Jerome Brunet
2025-02-12 7:26 ` Dan Carpenter
2025-02-12 10:16 ` Jerome Brunet
2025-02-06 18:23 ` [PATCH v2 7/7] clk: amlogic: axg-audio: use the auxiliary reset driver - take 2 Jerome Brunet
2025-02-06 18:32 ` [PATCH v2 0/7] driver core: auxiliary bus: add device creation helper Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250206-aux-device-create-helper-v2-3-fa6a0f326527@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=arnd@arndb.de \
--cc=david.m.ertman@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=ira.weiny@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®