* [PATCH] arm64: dts: ti: k3-j721s2-som-p0: Add flash partition details
@ 2025-02-15 7:00 Udit Kumar
2025-03-02 13:18 ` Vignesh Raghavendra
0 siblings, 1 reply; 2+ messages in thread
From: Udit Kumar @ 2025-02-15 7:00 UTC (permalink / raw)
To: nm, vigneshr, linux-arm-kernel, devicetree
Cc: kristo, robh, krzk+dt, conor+dt, linux-kernel, Udit Kumar
When used as boot device, OSPI flash hosts different boot
binaries and rootfs etc.
So Add partition details for images hosted on OSPI flash.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 41 ++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index b3a0385ed3d8..54fc5c4f8c3f 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -448,6 +448,47 @@ flash@0 {
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ospi.tiboot3";
+ reg = <0x0 0x80000>;
+ };
+
+ partition@80000 {
+ label = "ospi.tispl";
+ reg = <0x80000 0x200000>;
+ };
+
+ partition@280000 {
+ label = "ospi.u-boot";
+ reg = <0x280000 0x400000>;
+ };
+
+ partition@680000 {
+ label = "ospi.env";
+ reg = <0x680000 0x40000>;
+ };
+
+ partition@6c0000 {
+ label = "ospi.env.backup";
+ reg = <0x6c0000 0x40000>;
+ };
+
+ partition@800000 {
+ label = "ospi.rootfs";
+ reg = <0x800000 0x37c0000>;
+ };
+
+ partition@3fc0000 {
+ label = "ospi.phypattern";
+ reg = <0x3fc0000 0x40000>;
+ };
+ };
};
};
--
2.34.1
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH] arm64: dts: ti: k3-j721s2-som-p0: Add flash partition details
2025-02-15 7:00 [PATCH] arm64: dts: ti: k3-j721s2-som-p0: Add flash partition details Udit Kumar
@ 2025-03-02 13:18 ` Vignesh Raghavendra
0 siblings, 0 replies; 2+ messages in thread
From: Vignesh Raghavendra @ 2025-03-02 13:18 UTC (permalink / raw)
To: nm, linux-arm-kernel, devicetree, Udit Kumar
Cc: Vignesh Raghavendra, kristo, robh, krzk+dt, conor+dt, linux-kernel
Hi Udit Kumar,
On Sat, 15 Feb 2025 12:30:59 +0530, Udit Kumar wrote:
> When used as boot device, OSPI flash hosts different boot
> binaries and rootfs etc.
> So Add partition details for images hosted on OSPI flash.
>
>
I have applied the following to branch ti-next on [1].
Thank you!
[1/1] arm64: dts: ti: k3-j721s2-som-p0: Add flash partition details
commit: d9f17c11650c205fd4802033a5e880bf79662ace
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-03-02 13:18 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-02-15 7:00 [PATCH] arm64: dts: ti: k3-j721s2-som-p0: Add flash partition details Udit Kumar
2025-03-02 13:18 ` Vignesh Raghavendra
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®