mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: John Madieu <john.madieu.xa@bp.renesas.com>
To: mturquette@baylibre.com, magnus.damm@gmail.com,
	krzk+dt@kernel.org, rui.zhang@intel.com,
	daniel.lezcano@linaro.org, sboyd@kernel.org,
	geert+renesas@glider.be, lukasz.luba@arm.com, rafael@kernel.org,
	robh@kernel.org, p.zabel@pengutronix.de
Cc: biju.das.jz@bp.renesas.com, claudiu.beznea.uj@bp.renesas.com,
	conor+dt@kernel.org, devicetree@vger.kernel.org,
	john.madieu@gmail.com, linux-kernel@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org,
	John Madieu <john.madieu.xa@bp.renesas.com>
Subject: [PATCH 0/7] thermal: renesas: Add support fot RZ/G3E
Date: Thu, 20 Feb 2025 16:26:05 +0100	[thread overview]
Message-ID: <20250220152640.49010-1-john.madieu.xa@bp.renesas.com> (raw)

Hello,

This series adds support for the temperature sensor unit (TSU) found on the
Renesas RZ/G3E SoC.

The series consists of 7 patches (some of which are not related to the thermal
framework) that progressively add TSU support as follows:
- patch 1/7:	adds syscon/regmap support for accessing system controller
		registers, enabling access to TSU calibration values
- patch 2/7:	adds clock and reset signals to the CPG driver

- patch 3/7:	adds dt-bindings
- patch 4/7:	adds the actual TSU driver for the RZ/G3E
- patch 5/6:	adds safety mechanism to make sure we we protect the chip in
		case of consecutive read failures
- patch 6-7/7:	add DT node and defconfig enablement

Regards,

John Madieu (7):
  soc: renesas: rz-sysc: add syscon/regmap support
  clk: renesas: r9a09g047: Add clock and reset signals for the TSU IP
  dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
  thermal: renesas: rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
  thermal: renesas: rzg3e: Add safety check when reading temperature
  arm64: dts: renesas: r9a09g047: Add TSU node
  arm64: defconfig: Enable RZ/G3E thermal

 .../thermal/renesas,r9a09g047-tsu.yaml        | 123 +++++
 MAINTAINERS                                   |   7 +
 arch/arm64/boot/dts/renesas/r9a09g047.dtsi    |  49 ++
 arch/arm64/configs/defconfig                  |   1 +
 drivers/clk/renesas/r9a09g047-cpg.c           |   3 +
 drivers/soc/renesas/Kconfig                   |   1 +
 drivers/soc/renesas/r9a09g047-sys.c           |   1 +
 drivers/soc/renesas/rz-sysc.c                 |  30 +-
 drivers/soc/renesas/rz-sysc.h                 |   2 +
 drivers/thermal/renesas/Kconfig               |   7 +
 drivers/thermal/renesas/Makefile              |   1 +
 drivers/thermal/renesas/rzg3e_thermal.c       | 479 ++++++++++++++++++
 12 files changed, 703 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
 create mode 100644 drivers/thermal/renesas/rzg3e_thermal.c

-- 
2.25.1


             reply	other threads:[~2025-02-20 15:27 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-20 15:26 John Madieu [this message]
2025-02-20 15:26 ` [PATCH 1/7] soc: renesas: rz-sysc: add syscon/regmap support John Madieu
2025-02-20 15:26 ` [PATCH 2/7] clk: renesas: r9a09g047: Add clock and reset signals for the TSU IP John Madieu
2025-02-20 15:26 ` [PATCH 3/7] dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit John Madieu
2025-02-20 18:15   ` Rob Herring (Arm)
2025-02-26 15:49     ` John Madieu
2025-02-20 19:17   ` Rob Herring
2025-02-26 15:40     ` John Madieu
2025-02-27  9:11       ` Geert Uytterhoeven
2025-02-27 11:06         ` John Madieu
2025-02-20 15:26 ` [PATCH 4/7] thermal: renesas: rzg3e: Add thermal driver for the Renesas RZ/G3E SoC John Madieu
2025-02-20 15:26 ` [PATCH 5/7] thermal: renesas: rzg3e: Add safety check when reading temperature John Madieu
2025-02-20 15:26 ` [PATCH 6/7] arm64: dts: renesas: r9a09g047: Add TSU node John Madieu
2025-02-20 15:26 ` [PATCH 7/7] arm64: defconfig: Enable RZ/G3E thermal John Madieu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250220152640.49010-1-john.madieu.xa@bp.renesas.com \
    --to=john.madieu.xa@bp.renesas.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=claudiu.beznea.uj@bp.renesas.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=john.madieu@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=lukasz.luba@arm.com \
    --cc=magnus.damm@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®