[PATCH 3/7] dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit

[John Madieu <john.madieu.xa@bp.renesas.com>]

The Renesas RZ/G3E SoC includes a Thermal Sensor Unit (TSU) block designed
to measure the junction temperature. The device provides real-time temperature
measurements for thermal management, utilizing a single dedicated channel
(channel 1) for temperature sensing.

Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
---
 .../thermal/renesas,r9a09g047-tsu.yaml        | 123 ++++++++++++++++++
 1 file changed, 123 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml

diff --git a/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml b/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
new file mode 100644
index 000000000000..dbd3860a31d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/renesas,r9a09g047-tsu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G3E Temperature Sensor Unit (TSU)
+
+maintainers:
+  - John Madieu <john.madieu.xa@bp.renesas.com>
+
+description: |
+  The Temperature Sensor Unit (TSU) is an integrated thermal sensor that monitors
+  the chip temperature on the Renesas RZ/G3E SoC. The TSU provides real-time
+  temperature measurements for thermal management.
+
+properties:
+  compatible:
+    const: renesas,r9a09g047-tsu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      Interrupt specifiers for the TSU:
+      - S12TSUADI1: Conversion complete interrupt signal (pulse)
+      - S12TSUADCMPI1: Comparison result interrupt signal (level)
+
+  interrupt-names:
+    items:
+      - const: S12TSUADI1
+      - const: S12TSUADCMPI1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+  renesas,tsu-calibration-sys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to the system controller (sys) that contains the TSU
+      calibration values used for temperature calculations.
+
+  renesas,tsu-operating-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      TSU operating mode:
+      0: Mode 0 - Conversion started by software
+      1: Mode 1 - Conversion started by ELC trigger
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - power-domains
+  - interrupts
+  - interrupt-names
+  - "#thermal-sensor-cells"
+  - renesas,tsu-operating-mode
+  - renesas,tsu-calibration-sys
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas,r9a09g047-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tsu: thermal@14002000 {
+        compatible = "renesas,r9a09g047-tsu";
+        reg = <0 0x14002000 0 0x1000>;
+        clocks = <&cpg CPG_MOD 0x10a>;
+        resets = <&cpg 0xf8>;
+        power-domains = <&cpg>;
+        interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "S12TSUADI1", "S12TSUADCMPI1";
+        #thermal-sensor-cells = <0>;
+        renesas,tsu-operating-mode = <0>;
+        renesas,tsu-calibration-sys = <&sys>;
+    };
+
+    thermal-zones {
+        cpu-thermal {
+            polling-delay = <1000>;
+            polling-delay-passive = <250>;
+            thermal-sensors = <&tsu>;
+
+            cooling-maps {
+                map0 {
+                    trip = <&target>;
+                    cooling-device = <&cpu0 0 3>, <&cpu1 0 3>,
+                                     <&cpu2 0 3>, <&cpu3 0 3>;
+                    contribution = <1024>;
+                };
+            };
+
+            trips {
+                target: trip-point {
+                    temperature = <95000>;
+                    hysteresis = <1000>;
+                    type = "passive";
+                };
+
+                sensor_crit: sensor-crit {
+                    temperature = <120000>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
+            };
+        };
+    };
-- 
2.25.1