[PATCH v2 3/5] arm64: dts: ti: k3-am642-phyboard-electra: Add boot phase tags

[Wadim Egorov <w.egorov@phytec.de>]

The bootph-all and bootph-pre-ram tags were introduced in dt-schema
(dtschema/schemas/bootph.yaml) to define node usage across different
boot phases.

Add boot phase tags to all required nodes to ensure boot support from
all sources, including UART, Ethernet, uSD card, eMMC, and OSPI NOR Flash.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
v1: http://lists.infradead.org/pipermail/linux-arm-kernel/2025-February/1006243.html
v2:
  - Add bootph-all to main_pktdma
  - Drop bootph-all from cpsw3g
---
 arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi   | 15 +++++++++++++++
 .../boot/dts/ti/k3-am642-phyboard-electra-rdk.dts |  5 +++++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index 99a6fdfaa7fb..74423ca3204f 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -27,6 +27,7 @@ aliases {
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		bootph-all;
 	};
 
 	reserved_memory: reserved-memory {
@@ -132,6 +133,7 @@ AM64X_IOPAD(0x01f8, PIN_INPUT, 4)	/* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
 			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4)	/* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
 			AM64X_IOPAD(0x0100, PIN_OUTPUT, 7)	/* (V7) PRG1_PRU0_GPO18.GPIO0_63 */
 		>;
+		bootph-all;
 	};
 
 	cpsw_rgmii1_pins_default: cpsw-rgmii1-default-pins {
@@ -150,6 +152,7 @@ AM64X_IOPAD(0x01f4, PIN_INPUT, 4)	/* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */
 			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4)	/* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
 			AM64X_IOPAD(0x0154, PIN_INPUT, 7)	/* (V12) PRG1_PRU1_GPO19.GPIO0_84 */
 		>;
+		bootph-all;
 	};
 
 	eeprom_wp_pins_default: eeprom-wp-default-pins {
@@ -169,6 +172,7 @@ main_i2c0_pins_default: main-i2c0-default-pins {
 			AM64X_IOPAD(0x0260, PIN_INPUT, 0)	/* (A18) I2C0_SCL */
 			AM64X_IOPAD(0x0264, PIN_INPUT, 0)	/* (B18) I2C0_SDA */
 		>;
+		bootph-all;
 	};
 
 	ospi0_pins_default: ospi0-default-pins {
@@ -185,6 +189,7 @@ AM64X_IOPAD(0x0024, PIN_INPUT, 0)	/* (N18) OSPI0_D6 */
 			AM64X_IOPAD(0x0028, PIN_INPUT, 0)	/* (M17) OSPI0_D7 */
 			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0)	/* (L19) OSPI0_CSn0 */
 		>;
+		bootph-all;
 	};
 
 	rtc_pins_default: rtc-defaults-pins {
@@ -204,6 +209,7 @@ &cpsw3g_mdio {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&cpsw_mdio_pins_default>;
+	bootph-all;
 
 	cpsw3g_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
@@ -215,12 +221,14 @@ cpsw3g_phy1: ethernet-phy@1 {
 		reset-gpios = <&main_gpio0 63 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <1000>;
 		reset-deassert-us = <1000>;
+		bootph-all;
 	};
 };
 
 &cpsw_port1 {
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy1>;
+	bootph-all;
 	status = "okay";
 };
 
@@ -266,6 +274,7 @@ &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
+	bootph-all;
 
 	eeprom@50 {
 		compatible = "atmel,24c32";
@@ -330,6 +339,10 @@ vdda_1v8: ldo1 {
 	};
 };
 
+&main_pktdma {
+	bootph-all;
+};
+
 &main_r5fss0_core0 {
 	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
 	memory-region = <&main_r5fss0_core0_dma_memory_region>,
@@ -377,6 +390,7 @@ serial_flash: flash@0 {
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <0>;
+		bootph-all;
 	};
 };
 
@@ -386,6 +400,7 @@ &sdhci0 {
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 	keep-power-in-suspend;
+	bootph-all;
 };
 
 &tscadc0 {
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
index bc8e1ce11047..6fbd8d932396 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -171,6 +171,7 @@ vcc_3v3_mmc: regulator-sd {
 		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;
 		regulator-always-on;
+		bootph-all;
 	};
 };
 
@@ -275,6 +276,7 @@ AM64X_IOPAD(0x0290, PIN_INPUT, 0)		/* MMC1_CLKLB */
 			AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0)	/* (J19) MMC1_CMD */
 			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0)	/* (D19) MMC1_SDCD */
 		>;
+		bootph-all;
 	};
 
 	main_spi0_pins_default: main-spi0-default-pins {
@@ -291,6 +293,7 @@ main_uart0_pins_default: main-uart0-default-pins {
 			AM64X_IOPAD(0x0230, PIN_INPUT, 0)	/* (D15) UART0_RXD */
 			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0)	/* (C16) UART0_TXD */
 		>;
+		bootph-all;
 	};
 
 	main_uart1_pins_default: main-uart1-default-pins {
@@ -413,6 +416,7 @@ &main_uart0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
+	bootph-all;
 };
 
 &main_uart1 {
@@ -429,6 +433,7 @@ &sdhci1 {
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	disable-wp;
 	no-1-8-v;
+	bootph-all;
 };
 
 &serdes0 {
-- 
2.34.1