mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Chukun Pan <amadeus@jmu.edu.cn>
To: Heiko Stuebner <heiko@sntech.de>
Cc: Yao Zi <ziyao@disroot.org>, Rob Herring <robh@kernel.org>,
	Chukun Pan <amadeus@jmu.edu.cn>, Jonas Karlman <jonas@kwiboo.se>,
	Conor Dooley <conor+dt@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: [PATCH v3 2/2] arm64: dts: rockchip: Enable regulators for Radxa E20C
Date: Tue,  1 Apr 2025 20:00:20 +0800	[thread overview]
Message-ID: <20250401120020.976343-3-amadeus@jmu.edu.cn> (raw)
In-Reply-To: <20250401120020.976343-1-amadeus@jmu.edu.cn>

Enable pwm and fixed regulators for Radxa E20C. The pwm regulator is
used to power the CPU and GPU. Note that the LPDDR4 voltage is 1.1V.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
 .../boot/dts/rockchip/rk3528-radxa-e20c.dts   | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
index 57a446b5cbd6..14770bd63ae7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
@@ -9,6 +9,7 @@
 
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
 #include "rk3528.dtsi"
 
 / {
@@ -80,6 +81,26 @@ led-wan {
 		};
 	};
 
+	vdd_0v9: regulator-0v9-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_ddr: regulator-1v1-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vcc_1v8: regulator-1v8-vcc {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_1v8";
@@ -108,6 +129,46 @@ vcc5v0_sys: regulator-5v0-vcc-sys {
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};
+
+	vdd_arm: regulator-vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_arm";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <746000>;
+		regulator-max-microvolt = <1201000>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	vdd_logic: regulator-vdd-logic {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_logic";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <705000>;
+		regulator-max-microvolt = <1006000>;
+		regulator-settling-time-up-us = <250>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
 };
 
 &pinctrl {
@@ -132,6 +193,18 @@ wan_led_g: wan-led-g {
 	};
 };
 
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1m0_pins>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2m0_pins>;
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&vcc_1v8>;
 	status = "okay";
-- 
2.25.1


  parent reply	other threads:[~2025-04-01 12:00 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-01 12:00 [PATCH v3 0/2] arm64: dts: rockchip: Add pwm nodes for RK3528 Chukun Pan
2025-04-01 12:00 ` [PATCH v3 1/2] " Chukun Pan
2025-05-05 23:12   ` Jonas Karlman
2025-04-01 12:00 ` Chukun Pan [this message]
2025-05-05 23:12   ` [PATCH v3 2/2] arm64: dts: rockchip: Enable regulators for Radxa E20C Jonas Karlman
2025-05-06 11:15 ` [PATCH v3 0/2] arm64: dts: rockchip: Add pwm nodes for RK3528 Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250401120020.976343-3-amadeus@jmu.edu.cn \
    --to=amadeus@jmu.edu.cn \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=jonas@kwiboo.se \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh@kernel.org \
    --cc=ziyao@disroot.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®