Re: [PATCH v3 1/2] arm64: dts: rockchip: Add pwm nodes for RK3528

[Jonas Karlman <jonas@kwiboo.se>]

On 2025-04-01 14:00, Chukun Pan wrote:
> Add pwm nodes for RK3528. The PWM core on RK3528 is the same as
> RK3328, but the driver does not support interrupts yet.
> 
> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

pwm0-pwm2 has been verified working on my rk3528 boards and remaining
seem to be correct, I have also dropped my prior attempt of looking into
multi-channel handling as mentioned in v2, so this is:

Reviewed-by: Jonas Karlman <jonas@kwiboo.se>

Regards,
Jonas

> ---
>  arch/arm64/boot/dts/rockchip/rk3528.dtsi | 80 ++++++++++++++++++++++++
>  1 file changed, 80 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
> index 35704d0be37a..47d4f63f11d3 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
> @@ -465,6 +465,86 @@ uart7: serial@ffa28000 {
>  			status = "disabled";
>  		};
>  
> +		pwm0: pwm@ffa90000 {
> +			compatible = "rockchip,rk3528-pwm",
> +				     "rockchip,rk3328-pwm";
> +			reg = <0x0 0xffa90000 0x0 0x10>;
> +			clocks = <&cru CLK_PWM0>, <&cru PCLK_PWM0>;
> +			clock-names = "pwm", "pclk";
> +			#pwm-cells = <3>;
> +			status = "disabled";
> +		};
> +
> +		pwm1: pwm@ffa90010 {
> +			compatible = "rockchip,rk3528-pwm",
> +				     "rockchip,rk3328-pwm";
> +			reg = <0x0 0xffa90010 0x0 0x10>;
> +			clocks = <&cru CLK_PWM0>, <&cru PCLK_PWM0>;
> +			clock-names = "pwm", "pclk";
> +			#pwm-cells = <3>;
> +			status = "disabled";
> +		};
> +
> +		pwm2: pwm@ffa90020 {
> +			compatible = "rockchip,rk3528-pwm",
> +				     "rockchip,rk3328-pwm";
> +			reg = <0x0 0xffa90020 0x0 0x10>;
> +			clocks = <&cru CLK_PWM0>, <&cru PCLK_PWM0>;
> +			clock-names = "pwm", "pclk";
> +			#pwm-cells = <3>;
> +			status = "disabled";
> +		};
> +
> +		pwm3: pwm@ffa90030 {
> +			compatible = "rockchip,rk3528-pwm",
> +				     "rockchip,rk3328-pwm";
> +			reg = <0x0 0xffa90030 0x0 0x10>;
> +			clocks = <&cru CLK_PWM0>, <&cru PCLK_PWM0>;
> +			clock-names = "pwm", "pclk";
> +			#pwm-cells = <3>;
> +			status = "disabled";
> +		};
> +
> +		pwm4: pwm@ffa98000 {
> +			compatible = "rockchip,rk3528-pwm",
> +				     "rockchip,rk3328-pwm";
> +			reg = <0x0 0xffa98000 0x0 0x10>;
> +			clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> +			clock-names = "pwm", "pclk";
> +			#pwm-cells = <3>;
> +			status = "disabled";
> +		};
> +
> +		pwm5: pwm@ffa98010 {
> +			compatible = "rockchip,rk3528-pwm",
> +				     "rockchip,rk3328-pwm";
> +			reg = <0x0 0xffa98010 0x0 0x10>;
> +			clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> +			clock-names = "pwm", "pclk";
> +			#pwm-cells = <3>;
> +			status = "disabled";
> +		};
> +
> +		pwm6: pwm@ffa98020 {
> +			compatible = "rockchip,rk3528-pwm",
> +				     "rockchip,rk3328-pwm";
> +			reg = <0x0 0xffa98020 0x0 0x10>;
> +			clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> +			clock-names = "pwm", "pclk";
> +			#pwm-cells = <3>;
> +			status = "disabled";
> +		};
> +
> +		pwm7: pwm@ffa98030 {
> +			compatible = "rockchip,rk3528-pwm",
> +				     "rockchip,rk3328-pwm";
> +			reg = <0x0 0xffa98030 0x0 0x10>;
> +			clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> +			clock-names = "pwm", "pclk";
> +			#pwm-cells = <3>;
> +			status = "disabled";
> +		};
> +
>  		saradc: adc@ffae0000 {
>  			compatible = "rockchip,rk3528-saradc";
>  			reg = <0x0 0xffae0000 0x0 0x10000>;