From: "William A. Kennington III" <william@wkennington.com>
To: Tomer Maimon <tmaimon77@gmail.com>, Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
openbmc@lists.ozlabs.org,
"William A. Kennington III" <william@wkennington.com>
Subject: [PATCH v2] ARM: dts: nuvoton: Add UDC nodes
Date: Tue, 1 Apr 2025 16:56:30 -0700 [thread overview]
Message-ID: <20250401235630.3220150-1-william@wkennington.com> (raw)
The driver support was already added but we are missing the nodes in our
common devicetree.
Signed-off-by: William A. Kennington III <william@wkennington.com>
---
V1 -> V2: Fix udc -> udc nodenames, fix reg values for npcm750
.../dts/nuvoton/nuvoton-common-npcm7xx.dtsi | 71 +++++++++++++++++++
.../arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi | 65 +++++++++++++++++
2 files changed, 136 insertions(+)
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
index 5a466e97955a..e337f40ae0f2 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
@@ -99,6 +99,11 @@ rst: rst@801000 {
};
};
+ udc0_phy: usb-phy {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
ahb {
#address-cells = <1>;
#size-cells = <1>;
@@ -193,6 +198,72 @@ fiux: spi@fb001000 {
status = "disabled";
};
+ udc5: usb@f0835000 {
+ compatible = "nuvoton,npcm750-udc";
+ reg = <0xf0835000 0x1000
+ 0xfffd2800 0x800>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_SU>;
+ clock-names = "clk_usb_bridge";
+ phys = <&udc0_phy>;
+ phy_type = "utmi_wide";
+ dr_mode = "peripheral";
+ status = "disabled";
+ };
+
+ udc6: usb@f0836000 {
+ compatible = "nuvoton,npcm750-udc";
+ reg = <0xf0836000 0x1000
+ 0xfffd3000 0x800>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_SU>;
+ clock-names = "clk_usb_bridge";
+ phys = <&udc0_phy>;
+ phy_type = "utmi_wide";
+ dr_mode = "peripheral";
+ status = "disabled";
+ };
+
+ udc7: usb@f0837000 {
+ compatible = "nuvoton,npcm750-udc";
+ reg = <0xf0837000 0x1000
+ 0xfffd3800 0x800>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_SU>;
+ clock-names = "clk_usb_bridge";
+ phys = <&udc0_phy>;
+ phy_type = "utmi_wide";
+ dr_mode = "peripheral";
+ status = "disabled";
+ };
+
+ udc8: usb@f0838000 {
+ compatible = "nuvoton,npcm750-udc";
+ reg = <0xf0838000 0x1000
+ 0xfffd4000 0x800>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_SU>;
+ clock-names = "clk_usb_bridge";
+ phys = <&udc0_phy>;
+ phy_type = "utmi_wide";
+ dr_mode = "peripheral";
+ status = "disabled";
+ };
+
+ udc9: usb@f0839000 {
+ compatible = "nuvoton,npcm750-udc";
+ reg = <0xf0839000 0x1000
+ 0xfffd4800 0x800>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_SU>;
+ clock-names = "clk_usb_bridge";
+ nuvoton,sysgcr = <&gcr>;
+ phys = <&udc0_phy>;
+ phy_type = "utmi_wide";
+ dr_mode = "peripheral";
+ status = "disabled";
+ };
+
apb {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
index 30eed40b89b5..f42ad259636c 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
@@ -58,5 +58,70 @@ gmac1: eth@f0804000 {
&rg2mdio_pins>;
status = "disabled";
};
+
+ udc0: usb@f0830000 {
+ compatible = "nuvoton,npcm750-udc";
+ reg = <0xf0830000 0x1000
+ 0xfffd0000 0x800>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_SU>;
+ clock-names = "clk_usb_bridge";
+ phys = <&udc0_phy>;
+ phy_type = "utmi_wide";
+ dr_mode = "peripheral";
+ status = "disabled";
+ };
+
+ udc1: usb@f0831000 {
+ compatible = "nuvoton,npcm750-udc";
+ reg = <0xf0831000 0x1000
+ 0xfffd0800 0x800>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_SU>;
+ clock-names = "clk_usb_bridge";
+ phys = <&udc0_phy>;
+ phy_type = "utmi_wide";
+ dr_mode = "peripheral";
+ status = "disabled";
+ };
+
+ udc2: usb@f0832000 {
+ compatible = "nuvoton,npcm750-udc";
+ reg = <0xf0832000 0x1000
+ 0xfffd1000 0x800>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_SU>;
+ clock-names = "clk_usb_bridge";
+ phys = <&udc0_phy>;
+ phy_type = "utmi_wide";
+ dr_mode = "peripheral";
+ status = "disabled";
+ };
+
+ udc3: usb@f0833000 {
+ compatible = "nuvoton,npcm750-udc";
+ reg = <0xf0833000 0x1000
+ 0xfffd1800 0x800>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_SU>;
+ clock-names = "clk_usb_bridge";
+ phys = <&udc0_phy>;
+ phy_type = "utmi_wide";
+ dr_mode = "peripheral";
+ status = "disabled";
+ };
+
+ udc4: usb@f0834000 {
+ compatible = "nuvoton,npcm750-udc";
+ reg = <0xf0834000 0x1000
+ 0xfffd2000 0x800>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_SU>;
+ clock-names = "clk_usb_bridge";
+ phys = <&udc0_phy>;
+ phy_type = "utmi_wide";
+ dr_mode = "peripheral";
+ status = "disabled";
+ };
};
};
--
2.49.0.472.ge94155a9ec-goog
next reply other threads:[~2025-04-01 23:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-01 23:56 William A. Kennington III [this message]
2025-04-03 14:34 ` Andrew Jeffery
2025-04-16 18:00 ` Tomer Maimon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250401235630.3220150-1-william@wkennington.com \
--to=william@wkennington.com \
--cc=20240925093956.2449119-1-william@wkennington.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=robh@kernel.org \
--cc=tmaimon77@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®