[PATCH v2] ARM: dts: nuvoton: Add UDC nodes

[PATCH v2] ARM: dts: nuvoton: Add UDC nodes

[William A. Kennington III]

The driver support was already added but we are missing the nodes in our
common devicetree.

Signed-off-by: William A. Kennington III <william@wkennington.com>
---
V1 -> V2: Fix udc -> udc nodenames, fix reg values for npcm750

 .../dts/nuvoton/nuvoton-common-npcm7xx.dtsi   | 71 +++++++++++++++++++
 .../arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi | 65 +++++++++++++++++
 2 files changed, 136 insertions(+)

diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
index 5a466e97955a..e337f40ae0f2 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
@@ -99,6 +99,11 @@ rst: rst@801000 {
 		};
 	};
 
+	udc0_phy: usb-phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
 	ahb {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -193,6 +198,72 @@ fiux: spi@fb001000 {
 			status = "disabled";
 		};
 
+		udc5: usb@f0835000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0835000 0x1000
+			       0xfffd2800 0x800>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc6: usb@f0836000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0836000 0x1000
+			       0xfffd3000 0x800>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc7: usb@f0837000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0837000 0x1000
+			       0xfffd3800 0x800>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc8: usb@f0838000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0838000 0x1000
+			       0xfffd4000 0x800>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc9: usb@f0839000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0839000 0x1000
+			       0xfffd4800 0x800>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			nuvoton,sysgcr = <&gcr>;
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
 		apb {
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
index 30eed40b89b5..f42ad259636c 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
@@ -58,5 +58,70 @@ gmac1: eth@f0804000 {
 					&rg2mdio_pins>;
 			status = "disabled";
 		};
+
+		udc0: usb@f0830000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0830000 0x1000
+			       0xfffd0000 0x800>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc1: usb@f0831000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0831000 0x1000
+			       0xfffd0800 0x800>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc2: usb@f0832000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0832000 0x1000
+			       0xfffd1000 0x800>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc3: usb@f0833000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0833000 0x1000
+			       0xfffd1800 0x800>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc4: usb@f0834000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0834000 0x1000
+			       0xfffd2000 0x800>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
 	};
 };
-- 
2.49.0.472.ge94155a9ec-goog

Re: [PATCH v2] ARM: dts: nuvoton: Add UDC nodes

[Andrew Jeffery]

On Tue, 01 Apr 2025 16:56:30 -0700, William A. Kennington III wrote:
> The driver support was already added but we are missing the nodes in our
> common devicetree.
> 
> 

Thanks, I've applied this to be picked up through the BMC tree.

--
Andrew Jeffery <andrew@codeconstruct.com.au>

Re: [PATCH v2] ARM: dts: nuvoton: Add UDC nodes

[Tomer Maimon]

William, thanks for the patch.

Reviewed-by: Tomer Maimon <tmaimon77@gmail.com>



On Thu, 3 Apr 2025 at 17:34, Andrew Jeffery <andrew@codeconstruct.com.au> wrote:
>
> On Tue, 01 Apr 2025 16:56:30 -0700, William A. Kennington III wrote:
> > The driver support was already added but we are missing the nodes in our
> > common devicetree.
> >
> >
>
> Thanks, I've applied this to be picked up through the BMC tree.
>
> --
> Andrew Jeffery <andrew@codeconstruct.com.au>
>