From: Ben Zong-You Xie <ben717@andestech.com>
To: <devicetree@vger.kernel.org>, <linux-riscv@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <paul.walmsley@sifive.com>, <palmer@dabbelt.com>,
<aou@eecs.berkeley.edu>, <alex@ghiti.fr>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>, <tglx@linutronix.de>,
<daniel.lezcano@linaro.org>,
<prabhakar.mahadev-lad.rj@bp.renesas.com>, <tim609@andestech.com>,
"Ben Zong-You Xie" <ben717@andestech.com>
Subject: [PATCH 7/9] riscv: dts: andes: add QiLai SoC device tree
Date: Mon, 7 Apr 2025 18:49:35 +0800 [thread overview]
Message-ID: <20250407104937.315783-8-ben717@andestech.com> (raw)
In-Reply-To: <20250407104937.315783-1-ben717@andestech.com>
Introduce the initial device tree support for the Andes QiLai SoC.
For further information, you can refer to [1].
[1] https://www.andestech.com/en/products-solutions/andeshape-platforms/qilai-chip/
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
---
MAINTAINERS | 1 +
arch/riscv/boot/dts/andes/qilai.dtsi | 194 +++++++++++++++++++++++++++
2 files changed, 195 insertions(+)
create mode 100644 arch/riscv/boot/dts/andes/qilai.dtsi
diff --git a/MAINTAINERS b/MAINTAINERS
index d1e1b98dfe7b..b974e83c9f10 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20731,6 +20731,7 @@ S: Maintained
F: Documentation/devicetree/bindings/interrupt-controller/andestech,plicsw.yaml
F: Documentation/devicetree/bindings/riscv/andes.yaml
F: Documentation/devicetree/bindings/timer/andestech,plmt0.yaml
+F: arch/riscv/boot/dts/andes/
RISC-V ARCHITECTURE
M: Paul Walmsley <paul.walmsley@sifive.com>
diff --git a/arch/riscv/boot/dts/andes/qilai.dtsi b/arch/riscv/boot/dts/andes/qilai.dtsi
new file mode 100644
index 000000000000..7199a88afc9b
--- /dev/null
+++ b/arch/riscv/boot/dts/andes/qilai.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Andes Technology Corporation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <62500000>;
+
+ cpu0: cpu@0 {
+ compatible = "andestech,ax45mp", "riscv";
+ device_type = "cpu";
+ status = "okay";
+ reg = <0>;
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+ "zicntr", "zicsr", "zifencei",
+ "zihpm", "xandespmu";
+ mmu-type = "riscv,sv39";
+ clock-frequency = <100000000>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <256>;
+ i-cache-line-size = <64>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <128>;
+ d-cache-line-size = <64>;
+ next-level-cache = <&l2_cache>;
+
+ cpu0_intc: interrupt-controller {
+ compatible = "andestech,cpu-intc", "riscv,cpu-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ cpu1: cpu@1 {
+ compatible = "andestech,ax45mp", "riscv";
+ device_type = "cpu";
+ status = "okay";
+ reg = <1>;
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+ "zicntr", "zicsr", "zifencei",
+ "zihpm", "xandespmu";
+ mmu-type = "riscv,sv39";
+ clock-frequency = <100000000>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <256>;
+ i-cache-line-size = <64>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <128>;
+ d-cache-line-size = <64>;
+ next-level-cache = <&l2_cache>;
+
+ cpu1_intc: interrupt-controller {
+ compatible = "andestech,cpu-intc", "riscv,cpu-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ cpu2: cpu@2 {
+ compatible = "andestech,ax45mp", "riscv";
+ device_type = "cpu";
+ status = "okay";
+ reg = <2>;
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+ "zicntr", "zicsr", "zifencei",
+ "zihpm", "xandespmu";
+ mmu-type = "riscv,sv39";
+ clock-frequency = <100000000>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <256>;
+ i-cache-line-size = <64>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <128>;
+ d-cache-line-size = <64>;
+ next-level-cache = <&l2_cache>;
+
+ cpu2_intc: interrupt-controller {
+ compatible = "andestech,cpu-intc", "riscv,cpu-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ cpu3: cpu@3 {
+ compatible = "andestech,ax45mp", "riscv";
+ device_type = "cpu";
+ status = "okay";
+ reg = <3>;
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+ "zicntr", "zicsr", "zifencei",
+ "zihpm", "xandespmu";
+ mmu-type = "riscv,sv39";
+ clock-frequency = <100000000>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <256>;
+ i-cache-line-size = <64>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <128>;
+ d-cache-line-size = <64>;
+ next-level-cache = <&l2_cache>;
+
+ cpu3_intc: interrupt-controller {
+ compatible = "andestech,cpu-intc", "riscv,cpu-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+ };
+
+ memory@400000000 {
+ device_type = "memory";
+ reg = <0x4 0x00000000 0x4 0x00000000>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ plic: interrupt-controller@2000000 {
+ compatible = "andestech,qilai-plic", "andestech,nceplic100";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0x0 0x2000000 0x0 0x2000000>;
+ interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>;
+ riscv,ndev = <71>;
+ };
+
+ plic_sw: interrupt-controller@400000 {
+ compatible = "andestech,qilai-plicsw", "andestech,plicsw";
+ reg = <0x0 0x400000 0x0 0x400000>;
+ interrupts-extended = <&cpu0_intc 3>,
+ <&cpu1_intc 3>,
+ <&cpu2_intc 3>,
+ <&cpu3_intc 3>;
+ };
+
+ plmt: timer@100000 {
+ compatible = "andestech,qilai-aclint-mtimer", "andestech,plmt0";
+ reg = <0x0 0x100000 0x0 0x100000>;
+ interrupts-extended = <&cpu0_intc 7>,
+ <&cpu1_intc 7>,
+ <&cpu2_intc 7>,
+ <&cpu3_intc 7>;
+ };
+
+ l2_cache: cache-controller@200000 {
+ compatible = "andestech,ax45mp-cache", "cache";
+ reg = <0x0 0x200000 0x0 0x100000>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&plic>;
+ cache-line-size = <64>;
+ cache-level = <2>;
+ cache-sets = <2048>;
+ cache-size = <0x200000>;
+ cache-unified;
+ };
+
+ uart0: serial@30300000 {
+ compatible = "andestech,uart16550", "ns16550a";
+ reg = <0x0 0x30300000 0x0 0x100000>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <50000000>;
+ reg-offset = <32>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ no-loopback-test;
+ interrupt-parent = <&plic>;
+ };
+ };
+};
--
2.34.1
next prev parent reply other threads:[~2025-04-07 11:13 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-07 10:49 [PATCH 0/9] add Voyager board support Ben Zong-You Xie
2025-04-07 10:49 ` [PATCH 1/9] riscv: add Andes SoC family Kconfig support Ben Zong-You Xie
2025-04-07 10:49 ` [PATCH 2/9] dt-bindings: riscv: add Andes QiLai SoC and the Voyager board bindings Ben Zong-You Xie
2025-04-07 14:13 ` Rob Herring (Arm)
2025-04-07 10:49 ` [PATCH 3/9] dt-bindings: interrupt-controller: add Andes QiLai PLIC Ben Zong-You Xie
2025-04-07 14:14 ` Rob Herring (Arm)
2025-04-07 10:49 ` [PATCH 4/9] dt-bindings: interrupt-controller: add Andes machine-level software interrupt controller Ben Zong-You Xie
2025-04-07 14:17 ` Rob Herring
2025-04-21 12:19 ` Ben Zong-You Xie
2025-04-07 10:49 ` [PATCH 5/9] dt-bindings: timer: add Andes machine timer Ben Zong-You Xie
2025-04-07 14:18 ` Rob Herring
2025-04-07 10:49 ` [PATCH 6/9] dt-bindings: cache: ax45mp-cache: allow variable cache-sets for Andes L2 cache Ben Zong-You Xie
2025-04-07 14:19 ` Rob Herring (Arm)
2025-04-07 10:49 ` Ben Zong-You Xie [this message]
2025-04-07 14:30 ` [PATCH 7/9] riscv: dts: andes: add QiLai SoC device tree Krzysztof Kozlowski
2025-04-08 16:43 ` Conor Dooley
2025-04-07 10:49 ` [PATCH 8/9] riscv: dts: andes: add Voyager board " Ben Zong-You Xie
2025-04-07 14:31 ` Krzysztof Kozlowski
2025-04-07 10:49 ` [PATCH 9/9] riscv: defconfig: enable Andes SoC Ben Zong-You Xie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250407104937.315783-8-ben717@andestech.com \
--to=ben717@andestech.com \
--cc=alex@ghiti.fr \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh@kernel.org \
--cc=tglx@linutronix.de \
--cc=tim609@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®