[PATCH v5 2/9] arm64: dts: qcom: qcs6490-rb3gen2: Add TC9563 PCIe switch node

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

Add a node for the TC9563 PCIe switch, which has three downstream ports.
Two embedded Ethernet devices are present on one of the downstream ports.
As all these ports are present in the node represent the downstream
ports and embedded endpoints.

Power to the TC9563 is supplied through two LDO regulators, controlled by
two GPIOs, which are added as fixed regulators. Configure the TC9563
through I2C.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 129 +++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi         |   2 +-
 2 files changed, 130 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 7a36c90ad4ec8b52f30b22b1621404857d6ef336..17d29b922ee95b87e6e048e1db19d8023b657557 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -218,6 +218,31 @@ vph_pwr: vph-pwr-regulator {
 		regulator-min-microvolt = <3700000>;
 		regulator-max-microvolt = <3700000>;
 	};
+
+	vdd_ntn_0p9: regulator-vdd-ntn-0p9 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_NTN_0P9";
+		gpio = <&pm8350c_gpios 2 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <899400>;
+		regulator-max-microvolt = <899400>;
+		enable-active-high;
+		pinctrl-0 = <&ntn_0p9_en>;
+		pinctrl-names = "default";
+		regulator-enable-ramp-delay = <4300>;
+	};
+
+	vdd_ntn_1p8: regulator-vdd-ntn-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_NTN_1P8";
+		gpio = <&pm8350c_gpios 3 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		pinctrl-0 = <&ntn_1p8_en>;
+		pinctrl-names = "default";
+		regulator-enable-ramp-delay = <10000>;
+	};
+
 };
 
 &apps_rsc {
@@ -735,6 +760,78 @@ &pcie1_phy {
 	status = "okay";
 };
 
+&pcie1_port0 {
+	pcie@0,0 {
+		compatible = "pci1179,0623";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		device_type = "pci";
+		ranges;
+		bus-range = <0x2 0xff>;
+
+		vddc-supply = <&vdd_ntn_0p9>;
+		vdd18-supply = <&vdd_ntn_1p8>;
+		vdd09-supply = <&vdd_ntn_0p9>;
+		vddio1-supply = <&vdd_ntn_1p8>;
+		vddio2-supply = <&vdd_ntn_1p8>;
+		vddio18-supply = <&vdd_ntn_1p8>;
+
+		i2c-parent = <&i2c0 0x77>;
+
+		reset-gpios = <&pm8350c_gpios 1 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&tc9563_rsex_n>;
+		pinctrl-names = "default";
+
+		pcie@1,0 {
+			reg = <0x20800 0x0 0x0 0x0 0x0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			device_type = "pci";
+			ranges;
+			bus-range = <0x3 0xff>;
+		};
+
+		pcie@2,0 {
+			reg = <0x21000 0x0 0x0 0x0 0x0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			device_type = "pci";
+			ranges;
+			bus-range = <0x4 0xff>;
+		};
+
+		pcie@3,0 {
+			reg = <0x21800 0x0 0x0 0x0 0x0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges;
+			bus-range = <0x5 0xff>;
+
+			pci@0,0 {
+				reg = <0x50000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				ranges;
+			};
+
+			pci@0,1 {
+				reg = <0x50100 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				ranges;
+			};
+		};
+	};
+};
+
 &pm7325_gpios {
 	kypd_vol_up_n: kypd-vol-up-n-state {
 		pins = "gpio6";
@@ -839,6 +936,38 @@ &sdhc_2 {
 	status = "okay";
 };
 
+&pm8350c_gpios {
+	ntn_0p9_en: ntn-0p9-en-state {
+		pins = "gpio2";
+		function = "normal";
+
+		bias-disable;
+		input-disable;
+		output-enable;
+		power-source = <0>;
+	};
+
+	ntn_1p8_en: ntn-1p8-en-state {
+		pins = "gpio3";
+		function = "normal";
+
+		bias-disable;
+		input-disable;
+		output-enable;
+		power-source = <0>;
+	};
+
+	tc9563_rsex_n: tc9563-resx-state {
+		pins = "gpio1";
+		function = "normal";
+
+		bias-disable;
+		input-disable;
+		output-enable;
+		power-source = <0>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <32 2>, /* ADSP */
 			       <48 4>; /* NFC */
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 0f2caf36910b65c398c9e03800a8ce0a8a1f8fc7..4265fbf6c97e8a0be56d26ffe077cdafc80e18bb 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2284,7 +2284,7 @@ pcie1: pcie@1c08000 {
 
 			status = "disabled";
 
-			pcie@0 {
+			pcie1_port0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;

-- 
2.34.1