From: kernel test robot <lkp@intel.com>
To: "Krishna Chaitanya Chundru" <krishna.chundru@oss.qualcomm.com>,
"Bjorn Helgaas" <helgaas@kernel.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"chaitanya chundru" <quic_krichai@quicinc.com>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konradybcio@kernel.org>,
cros-qcom-dts-watchers@chromium.org,
"Jingoo Han" <jingoohan1@gmail.com>,
"Bartosz Golaszewski" <brgl@bgdev.pl>
Cc: oe-kbuild-all@lists.linux.dev, quic_vbadigan@quicnic.com,
amitk@kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, jorge.ramirez@oss.qualcomm.com,
Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>,
Dmitry Baryshkov <lumag@kernel.org>
Subject: Re: [PATCH v5 8/9] PCI: pwrctrl: Add power control driver for tc9563
Date: Tue, 15 Apr 2025 16:55:47 +0800 [thread overview]
Message-ID: <202504151624.8fF601aD-lkp@intel.com> (raw)
In-Reply-To: <20250412-qps615_v4_1-v5-8-5b6a06132fec@oss.qualcomm.com>
Hi Krishna,
kernel test robot noticed the following build errors:
[auto build test ERROR on f4d2ef48250ad057e4f00087967b5ff366da9f39]
url: https://github.com/intel-lab-lkp/linux/commits/Krishna-Chaitanya-Chundru/dt-bindings-PCI-Add-binding-for-Toshiba-TC9563-PCIe-switch/20250414-123816
base: f4d2ef48250ad057e4f00087967b5ff366da9f39
patch link: https://lore.kernel.org/r/20250412-qps615_v4_1-v5-8-5b6a06132fec%40oss.qualcomm.com
patch subject: [PATCH v5 8/9] PCI: pwrctrl: Add power control driver for tc9563
config: sparc-allmodconfig (https://download.01.org/0day-ci/archive/20250415/202504151624.8fF601aD-lkp@intel.com/config)
compiler: sparc64-linux-gcc (GCC) 14.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250415/202504151624.8fF601aD-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202504151624.8fF601aD-lkp@intel.com/
All errors (new ones prefixed by >>):
drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c: In function 'tc9563_pwrctrl_set_l0s_l1_entry_delay':
>> drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c:257:34: error: implicit declaration of function 'u32_replace_bits' [-Wimplicit-function-declaration]
257 | rd_val = u32_replace_bits(rd_val, units, TC9563_ETH_L1_DELAY_MASK);
| ^~~~~~~~~~~~~~~~
drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c: In function 'tc9563_pwrctrl_power_off':
drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c:419:9: error: implicit declaration of function 'gpiod_set_value' [-Wimplicit-function-declaration]
419 | gpiod_set_value(ctx->reset_gpio, 1);
| ^~~~~~~~~~~~~~~
drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c: In function 'tc9563_pwrctrl_probe':
drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c:535:27: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'em_pd_get'? [-Wimplicit-function-declaration]
535 | ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
| ^~~~~~~~~~~~~~
| em_pd_get
drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c:535:56: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function)
535 | ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
| ^~~~~~~~~~~~~~
drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c:535:56: note: each undeclared identifier is reported only once for each function it appears in
vim +/u32_replace_bits +257 drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c
238
239 static int tc9563_pwrctrl_set_l0s_l1_entry_delay(struct tc9563_pwrctrl_ctx *ctx,
240 enum tc9563_pwrctrl_ports port, bool is_l1, u32 ns)
241 {
242 u32 rd_val, units;
243 int ret;
244
245 if (ns < 256)
246 return 0;
247
248 /* convert to units of 256ns */
249 units = ns / 256;
250
251 if (port == TC9563_ETHERNET) {
252 ret = tc9563_pwrctrl_i2c_read(ctx->client, TC9563_EMBEDDED_ETH_DELAY, &rd_val);
253 if (ret)
254 return ret;
255
256 if (is_l1)
> 257 rd_val = u32_replace_bits(rd_val, units, TC9563_ETH_L1_DELAY_MASK);
258 else
259 rd_val = u32_replace_bits(rd_val, units, TC9563_ETH_L0S_DELAY_MASK);
260
261 return tc9563_pwrctrl_i2c_write(ctx->client, TC9563_EMBEDDED_ETH_DELAY, rd_val);
262 }
263
264 ret = tc9563_pwrctrl_i2c_write(ctx->client, TC9563_PORT_SELECT, BIT(port));
265 if (ret)
266 return ret;
267
268 return tc9563_pwrctrl_i2c_write(ctx->client,
269 is_l1 ? TC9563_PORT_L1_DELAY : TC9563_PORT_L0S_DELAY, units);
270 }
271
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
next prev parent reply other threads:[~2025-04-15 8:57 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-12 1:49 [PATCH v5 0/9] PCI: Enable Power and configure the TC9563 PCIe switch Krishna Chaitanya Chundru
2025-04-12 1:49 ` [PATCH v5 1/9] dt-bindings: PCI: Add binding for Toshiba " Krishna Chaitanya Chundru
2025-04-12 18:12 ` Rob Herring (Arm)
2025-04-12 1:49 ` [PATCH v5 2/9] arm64: dts: qcom: qcs6490-rb3gen2: Add TC9563 PCIe switch node Krishna Chaitanya Chundru
2025-04-13 16:35 ` Dmitry Baryshkov
2025-04-12 1:49 ` [PATCH v5 3/9] PCI: Add new start_link() & stop_link function ops Krishna Chaitanya Chundru
2025-04-18 20:20 ` Bjorn Helgaas
2025-04-12 1:49 ` [PATCH v5 4/9] PCI: dwc: Add host_start_link() & host_start_link() hooks for dwc glue drivers Krishna Chaitanya Chundru
2025-04-15 19:13 ` Frank Li
2025-04-16 4:20 ` Krishna Chaitanya Chundru
2025-04-12 1:49 ` [PATCH v5 5/9] PCI: dwc: Implement .start_link(), .stop_link() hooks Krishna Chaitanya Chundru
2025-04-12 1:49 ` [PATCH v5 6/9] PCI: qcom: Add support for host_stop_link() & host_start_link() Krishna Chaitanya Chundru
2025-04-12 1:49 ` [PATCH v5 7/9] PCI: PCI: Add pcie_link_is_active() to determine if the PCIe link is active Krishna Chaitanya Chundru
2025-04-12 3:52 ` Lukas Wunner
2025-04-13 17:14 ` Lukas Wunner
2025-04-14 4:21 ` Krishna Chaitanya Chundru
2025-04-14 4:23 ` Krishna Chaitanya Chundru
2025-04-12 18:11 ` Rob Herring
2025-04-12 1:49 ` [PATCH v5 8/9] PCI: pwrctrl: Add power control driver for tc9563 Krishna Chaitanya Chundru
2025-04-15 8:44 ` kernel test robot
2025-04-15 8:55 ` kernel test robot [this message]
2025-04-18 20:16 ` Bjorn Helgaas
2025-04-19 3:24 ` Krishna Chaitanya Chundru
2025-06-27 12:17 ` Dmitry Baryshkov
2025-04-12 1:49 ` [PATCH v5 9/9] arm64: defconfig: Enable TC9563 PWRCTL driver Krishna Chaitanya Chundru
2025-04-18 20:00 ` [PATCH v5 0/9] PCI: Enable Power and configure the TC9563 PCIe switch Bjorn Helgaas
2025-04-19 3:26 ` Krishna Chaitanya Chundru
2025-07-01 7:11 ` Dmitry Baryshkov
2025-07-01 7:40 ` Krishna Chaitanya Chundru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202504151624.8fF601aD-lkp@intel.com \
--to=lkp@intel.com \
--cc=amitk@kernel.org \
--cc=andersson@kernel.org \
--cc=brgl@bgdev.pl \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=helgaas@kernel.org \
--cc=jingoohan1@gmail.com \
--cc=jorge.ramirez@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krishna.chundru@oss.qualcomm.com \
--cc=krzk@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=lumag@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=quic_krichai@quicinc.com \
--cc=quic_vbadigan@quicnic.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome