[PATCH v3 0/2] Add Visionox G2647FB105 panel support

[PATCH v3 0/2] Add Visionox G2647FB105 panel support

[Alexander Baransky]

This patch series adds support for the Visionox G2647FB105 panel, used in:
- Xiaomi Mi Note 10 / CC9 Pro (sm7150-xiaomi-tucana)
- Xiaomi Mi Note 10 Lite (sm7150-xiaomi-toco)

Testing has been done by me on sm7150-xiaomi-tucana. According to the
downstream DTS, this driver should be fully compatible with the
sm7150-xiaomi-toco (unfortunately not tested) without requiring any
modifications.

Changes in v3:
- Don't disable regulators in visionox_g2647fb105_prepare() if
visionox_g2647fb105_on() fails (in patch 1)
Link to v2:
https://lore.kernel.org/all/20250327163750.986815-1-sanyapilot496@gmail.com/

Changes in v2:
- Describe the power configuration in commit message
(and fix the sentence style) in patch 1
- Add Krzysztof's Reviewed-by tag to patch 1
- Use a static const struct for supplies in patch 2
- Fix identations in patch 2
Link to v1:
https://lore.kernel.org/all/20250325155756.703907-1-sanyapilot496@gmail.com/

Signed-off-by: Alexander Baransky <sanyapilot496@gmail.com>

Alexander Baransky (2):
  dt-bindings: display: panel: Add Visionox G2647FB105
  drm/panel: Add Visionox G2647FB105 panel driver

 .../display/panel/visionox,g2647fb105.yaml    |  79 +++++
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-visionox-g2647fb105.c | 280 ++++++++++++++++++
 4 files changed, 369 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-visionox-g2647fb105.c

-- 
2.49.0

[PATCH v3 1/2] dt-bindings: display: panel: Add Visionox G2647FB105

[Alexander Baransky]

Add a DT binding for the Visionox G2647FB105, a 6.47 inch 1080x2340
MIPI-DSI CMD mode AMOLED panel used in:
- Xiaomi Mi Note 10 / CC9 Pro (sm7150-xiaomi-tucana)
- Xiaomi Mi Note 10 Lite (sm7150-xiaomi-toco)

Xiaomi likes to use different panels in various revisions of the same
device. A factory panel even can be replaced with another model in a
service center.
So, the power configuration of this panel is similar to
some Samsung AMOLED panels, e.g. samsung,ams639rq08, which can be found on
other sm7150 Xiaomi devices. Even though Samsung panels weren't used
in sm7150-xiaomi-tucana and toco, the described voltage rails exist
(confirmed by schematics of the device).

Signed-off-by: Alexander Baransky <sanyapilot496@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../display/panel/visionox,g2647fb105.yaml    | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml b/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml
new file mode 100644
index 000000000000..49dcd9b8f670
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,g2647fb105.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox G2647FB105 6.47" 1080x2340 MIPI-DSI Panel
+
+maintainers:
+  - Alexander Baransky <sanyapilot496@gmail.com>
+
+description:
+  The Visionox G2647FB105 is a 6.47 inch 1080x2340 MIPI-DSI CMD mode OLED panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: visionox,g2647fb105
+
+  reg:
+    maxItems: 1
+
+  vdd3p3-supply:
+    description: 3.3V source voltage rail
+
+  vddio-supply:
+    description: I/O source voltage rail
+
+  vsn-supply:
+    description: Negative source voltage rail
+
+  vsp-supply:
+    description: Positive source voltage rail
+
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vdd3p3-supply
+  - vddio-supply
+  - vsn-supply
+  - vsp-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "visionox,g2647fb105";
+            reg = <0>;
+
+            vdd3p3-supply = <&vreg_l7c_3p0>;
+            vddio-supply = <&vreg_l13a_1p8>;
+            vsn-supply = <&vreg_ibb>;
+            vsp-supply = <&vreg_lab>;
+
+            reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.49.0

[PATCH v3 2/2] drm/panel: Add Visionox G2647FB105 panel driver

[Alexander Baransky]

Add the driver for Visionox G2647FB105 6.47" FHD Plus CMD mode AMOLED panel
support found in:
- Xiaomi Mi Note 10 / CC9 Pro (sm7150-xiaomi-tucana)
- Xiaomi Mi Note 10 Lite (sm7150-xiaomi-toco)

Signed-off-by: Alexander Baransky <sanyapilot496@gmail.com>
---
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-visionox-g2647fb105.c | 280 ++++++++++++++++++
 3 files changed, 290 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-visionox-g2647fb105.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index e059b06e0239..8b73f1e8bef4 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -996,6 +996,15 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
 	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
 	  Video Mode panel
 
+config DRM_PANEL_VISIONOX_G2647FB105
+	tristate "Visionox G2647FB105"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Visionox
+	  G2647FB105 (2340x1080@60Hz) AMOLED DSI cmd mode panel.
+
 config DRM_PANEL_VISIONOX_R66451
 	tristate "Visionox R66451"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 1bb8ae46b59b..911400bca51a 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
 obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
+obj-$(CONFIG_DRM_PANEL_VISIONOX_G2647FB105) += panel-visionox-g2647fb105.o
 obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o
 obj-$(CONFIG_DRM_PANEL_VISIONOX_RM692E5) += panel-visionox-rm692e5.o
 obj-$(CONFIG_DRM_PANEL_VISIONOX_VTDR6130) += panel-visionox-vtdr6130.o
diff --git a/drivers/gpu/drm/panel/panel-visionox-g2647fb105.c b/drivers/gpu/drm/panel/panel-visionox-g2647fb105.c
new file mode 100644
index 000000000000..413849f7b4de
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-visionox-g2647fb105.c
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
+ *   Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *   Copyright (c) 2025, Alexander Baransky <sanyapilot496@gmail.com>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct visionox_g2647fb105 {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct gpio_desc *reset_gpio;
+	struct regulator_bulk_data *supplies;
+};
+
+static const struct regulator_bulk_data visionox_g2647fb105_supplies[] = {
+	{ .supply = "vdd3p3" },
+	{ .supply = "vddio" },
+	{ .supply = "vsn" },
+	{ .supply = "vsp" },
+};
+
+static inline
+struct visionox_g2647fb105 *to_visionox_g2647fb105(struct drm_panel *panel)
+{
+	return container_of(panel, struct visionox_g2647fb105, panel);
+}
+
+static void visionox_g2647fb105_reset(struct visionox_g2647fb105 *ctx)
+{
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(1000, 2000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(10000, 11000);
+}
+
+static int visionox_g2647fb105_on(struct visionox_g2647fb105 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x70, 0x04);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x40);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x4d, 0x32);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x40);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xbe, 0x17);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xbf, 0xbb);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc0, 0xdd);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc1, 0xff);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0xd0);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x03, 0x24);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x04, 0x03);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc2, 0x08);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x00);
+
+	mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+	mipi_dsi_dcs_set_display_brightness_multi(&dsi_ctx, 0x0000);
+	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 100);
+
+	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
+
+	return dsi_ctx.accum_err;
+}
+
+static int visionox_g2647fb105_off(struct visionox_g2647fb105 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+
+	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 50);
+
+	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 20);
+
+	return dsi_ctx.accum_err;
+}
+
+static int visionox_g2647fb105_prepare(struct drm_panel *panel)
+{
+	struct visionox_g2647fb105 *ctx = to_visionox_g2647fb105(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(visionox_g2647fb105_supplies), ctx->supplies);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+
+	visionox_g2647fb105_reset(ctx);
+
+	ret = visionox_g2647fb105_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int visionox_g2647fb105_unprepare(struct drm_panel *panel)
+{
+	struct visionox_g2647fb105 *ctx = to_visionox_g2647fb105(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = visionox_g2647fb105_off(ctx);
+	if (ret < 0)
+		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	regulator_bulk_disable(ARRAY_SIZE(visionox_g2647fb105_supplies), ctx->supplies);
+
+	return 0;
+}
+
+static const struct drm_display_mode visionox_g2647fb105_mode = {
+	.clock = (1080 + 28 + 4 + 36) * (2340 + 8 + 4 + 4) * 60 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 28,
+	.hsync_end = 1080 + 28 + 4,
+	.htotal = 1080 + 28 + 4 + 36,
+	.vdisplay = 2340,
+	.vsync_start = 2340 + 8,
+	.vsync_end = 2340 + 8 + 4,
+	.vtotal = 2340 + 8 + 4 + 4,
+	.width_mm = 69,
+	.height_mm = 149,
+};
+
+static int visionox_g2647fb105_get_modes(struct drm_panel *panel,
+					struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &visionox_g2647fb105_mode);
+	if (!mode)
+		return -ENOMEM;
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs visionox_g2647fb105_panel_funcs = {
+	.prepare = visionox_g2647fb105_prepare,
+	.unprepare = visionox_g2647fb105_unprepare,
+	.get_modes = visionox_g2647fb105_get_modes,
+};
+
+static int visionox_g2647fb105_bl_update_status(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	u16 brightness = backlight_get_brightness(bl);
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
+	if (ret < 0)
+		return ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	return 0;
+}
+
+static const struct backlight_ops visionox_g2647fb105_bl_ops = {
+	.update_status = visionox_g2647fb105_bl_update_status,
+};
+
+static struct backlight_device *
+visionox_g2647fb105_create_backlight(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	const struct backlight_properties props = {
+		.type = BACKLIGHT_RAW,
+		.brightness = 1023,
+		.max_brightness = 2047,
+	};
+
+	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+					      &visionox_g2647fb105_bl_ops, &props);
+}
+
+static int visionox_g2647fb105_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct visionox_g2647fb105 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ret = devm_regulator_bulk_get_const(dev,
+					    ARRAY_SIZE(visionox_g2647fb105_supplies),
+					    visionox_g2647fb105_supplies,
+					    &ctx->supplies);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM;
+
+	ctx->panel.prepare_prev_first = true;
+
+	drm_panel_init(&ctx->panel, dev, &visionox_g2647fb105_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+	ctx->panel.prepare_prev_first = true;
+
+	ctx->panel.backlight = visionox_g2647fb105_create_backlight(dsi);
+	if (IS_ERR(ctx->panel.backlight))
+		return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
+				     "Failed to create backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	ret = devm_mipi_dsi_attach(dev, dsi);
+	if (ret < 0) {
+		drm_panel_remove(&ctx->panel);
+		return dev_err_probe(dev, ret, "Failed to attach to DSI host\n");
+	}
+
+	return 0;
+}
+
+static void visionox_g2647fb105_remove(struct mipi_dsi_device *dsi)
+{
+	struct visionox_g2647fb105 *ctx = mipi_dsi_get_drvdata(dsi);
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id visionox_g2647fb105_of_match[] = {
+	{ .compatible = "visionox,g2647fb105" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, visionox_g2647fb105_of_match);
+
+static struct mipi_dsi_driver visionox_g2647fb105_driver = {
+	.probe = visionox_g2647fb105_probe,
+	.remove = visionox_g2647fb105_remove,
+	.driver = {
+		.name = "panel-visionox-g2647fb105",
+		.of_match_table = visionox_g2647fb105_of_match,
+	},
+};
+module_mipi_dsi_driver(visionox_g2647fb105_driver);
+
+MODULE_AUTHOR("Alexander Baransky <sanyapilot496@gmail.com>");
+MODULE_DESCRIPTION("DRM driver for Visionox G2647FB105 AMOLED DSI panel");
+MODULE_LICENSE("GPL");
-- 
2.49.0

Re: [PATCH v3 2/2] drm/panel: Add Visionox G2647FB105 panel driver

[neil.armstrong]

On 14/04/2025 19:26, Alexander Baransky wrote:
> Add the driver for Visionox G2647FB105 6.47" FHD Plus CMD mode AMOLED panel
> support found in:
> - Xiaomi Mi Note 10 / CC9 Pro (sm7150-xiaomi-tucana)
> - Xiaomi Mi Note 10 Lite (sm7150-xiaomi-toco)
> 
> Signed-off-by: Alexander Baransky <sanyapilot496@gmail.com>
> ---
>   drivers/gpu/drm/panel/Kconfig                 |   9 +
>   drivers/gpu/drm/panel/Makefile                |   1 +
>   .../gpu/drm/panel/panel-visionox-g2647fb105.c | 280 ++++++++++++++++++
>   3 files changed, 290 insertions(+)
>   create mode 100644 drivers/gpu/drm/panel/panel-visionox-g2647fb105.c
> 
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index e059b06e0239..8b73f1e8bef4 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -996,6 +996,15 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
>   	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
>   	  Video Mode panel
>   
> +config DRM_PANEL_VISIONOX_G2647FB105
> +	tristate "Visionox G2647FB105"
> +	depends on OF
> +	depends on DRM_MIPI_DSI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	help
> +	  Say Y here if you want to enable support for the Visionox
> +	  G2647FB105 (2340x1080@60Hz) AMOLED DSI cmd mode panel.
> +
>   config DRM_PANEL_VISIONOX_R66451
>   	tristate "Visionox R66451"
>   	depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 1bb8ae46b59b..911400bca51a 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -101,6 +101,7 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
>   obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
>   obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
>   obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
> +obj-$(CONFIG_DRM_PANEL_VISIONOX_G2647FB105) += panel-visionox-g2647fb105.o
>   obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o
>   obj-$(CONFIG_DRM_PANEL_VISIONOX_RM692E5) += panel-visionox-rm692e5.o
>   obj-$(CONFIG_DRM_PANEL_VISIONOX_VTDR6130) += panel-visionox-vtdr6130.o
> diff --git a/drivers/gpu/drm/panel/panel-visionox-g2647fb105.c b/drivers/gpu/drm/panel/panel-visionox-g2647fb105.c
> new file mode 100644
> index 000000000000..413849f7b4de
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-visionox-g2647fb105.c
> @@ -0,0 +1,280 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
> + *   Copyright (c) 2013, The Linux Foundation. All rights reserved.
> + *   Copyright (c) 2025, Alexander Baransky <sanyapilot496@gmail.com>
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +struct visionox_g2647fb105 {
> +	struct drm_panel panel;
> +	struct mipi_dsi_device *dsi;
> +	struct gpio_desc *reset_gpio;
> +	struct regulator_bulk_data *supplies;
> +};
> +
> +static const struct regulator_bulk_data visionox_g2647fb105_supplies[] = {
> +	{ .supply = "vdd3p3" },
> +	{ .supply = "vddio" },
> +	{ .supply = "vsn" },
> +	{ .supply = "vsp" },
> +};
> +
> +static inline
> +struct visionox_g2647fb105 *to_visionox_g2647fb105(struct drm_panel *panel)
> +{
> +	return container_of(panel, struct visionox_g2647fb105, panel);
> +}
> +
> +static void visionox_g2647fb105_reset(struct visionox_g2647fb105 *ctx)
> +{
> +	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> +	usleep_range(1000, 2000);
> +	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> +	usleep_range(10000, 11000);
> +}
> +
> +static int visionox_g2647fb105_on(struct visionox_g2647fb105 *ctx)
> +{
> +	struct mipi_dsi_device *dsi = ctx->dsi;
> +	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
> +
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x70, 0x04);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x40);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x4d, 0x32);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x40);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xbe, 0x17);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xbf, 0xbb);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc0, 0xdd);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc1, 0xff);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0xd0);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x03, 0x24);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x04, 0x03);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x00);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc2, 0x08);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x00);
> +
> +	mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> +	mipi_dsi_dcs_set_display_brightness_multi(&dsi_ctx, 0x0000);
> +	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
> +	mipi_dsi_msleep(&dsi_ctx, 100);
> +
> +	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
> +
> +	return dsi_ctx.accum_err;
> +}
> +
> +static int visionox_g2647fb105_off(struct visionox_g2647fb105 *ctx)
> +{
> +	struct mipi_dsi_device *dsi = ctx->dsi;
> +	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
> +
> +	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
> +	mipi_dsi_msleep(&dsi_ctx, 50);
> +
> +	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
> +	mipi_dsi_msleep(&dsi_ctx, 20);
> +
> +	return dsi_ctx.accum_err;
> +}
> +
> +static int visionox_g2647fb105_prepare(struct drm_panel *panel)
> +{
> +	struct visionox_g2647fb105 *ctx = to_visionox_g2647fb105(panel);
> +	struct device *dev = &ctx->dsi->dev;
> +	int ret;
> +
> +	ret = regulator_bulk_enable(ARRAY_SIZE(visionox_g2647fb105_supplies), ctx->supplies);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to enable regulators: %d\n", ret);
> +		return ret;
> +	}
> +
> +	visionox_g2647fb105_reset(ctx);
> +
> +	ret = visionox_g2647fb105_on(ctx);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to initialize panel: %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int visionox_g2647fb105_unprepare(struct drm_panel *panel)
> +{
> +	struct visionox_g2647fb105 *ctx = to_visionox_g2647fb105(panel);
> +	struct device *dev = &ctx->dsi->dev;
> +	int ret;
> +
> +	ret = visionox_g2647fb105_off(ctx);
> +	if (ret < 0)
> +		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
> +
> +	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> +	regulator_bulk_disable(ARRAY_SIZE(visionox_g2647fb105_supplies), ctx->supplies);
> +
> +	return 0;
> +}
> +
> +static const struct drm_display_mode visionox_g2647fb105_mode = {
> +	.clock = (1080 + 28 + 4 + 36) * (2340 + 8 + 4 + 4) * 60 / 1000,
> +	.hdisplay = 1080,
> +	.hsync_start = 1080 + 28,
> +	.hsync_end = 1080 + 28 + 4,
> +	.htotal = 1080 + 28 + 4 + 36,
> +	.vdisplay = 2340,
> +	.vsync_start = 2340 + 8,
> +	.vsync_end = 2340 + 8 + 4,
> +	.vtotal = 2340 + 8 + 4 + 4,
> +	.width_mm = 69,
> +	.height_mm = 149,
> +};
> +
> +static int visionox_g2647fb105_get_modes(struct drm_panel *panel,
> +					struct drm_connector *connector)
> +{
> +	struct drm_display_mode *mode;
> +
> +	mode = drm_mode_duplicate(connector->dev, &visionox_g2647fb105_mode);
> +	if (!mode)
> +		return -ENOMEM;
> +
> +	drm_mode_set_name(mode);
> +
> +	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +	connector->display_info.width_mm = mode->width_mm;
> +	connector->display_info.height_mm = mode->height_mm;
> +	drm_mode_probed_add(connector, mode);
> +
> +	return 1;
> +}
> +
> +static const struct drm_panel_funcs visionox_g2647fb105_panel_funcs = {
> +	.prepare = visionox_g2647fb105_prepare,
> +	.unprepare = visionox_g2647fb105_unprepare,
> +	.get_modes = visionox_g2647fb105_get_modes,
> +};
> +
> +static int visionox_g2647fb105_bl_update_status(struct backlight_device *bl)
> +{
> +	struct mipi_dsi_device *dsi = bl_get_data(bl);
> +	u16 brightness = backlight_get_brightness(bl);
> +	int ret;
> +
> +	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> +	ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
> +	if (ret < 0)
> +		return ret;
> +
> +	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> +	return 0;
> +}
> +
> +static const struct backlight_ops visionox_g2647fb105_bl_ops = {
> +	.update_status = visionox_g2647fb105_bl_update_status,
> +};
> +
> +static struct backlight_device *
> +visionox_g2647fb105_create_backlight(struct mipi_dsi_device *dsi)
> +{
> +	struct device *dev = &dsi->dev;
> +	const struct backlight_properties props = {
> +		.type = BACKLIGHT_RAW,
> +		.brightness = 1023,
> +		.max_brightness = 2047,
> +	};
> +
> +	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
> +					      &visionox_g2647fb105_bl_ops, &props);
> +}
> +
> +static int visionox_g2647fb105_probe(struct mipi_dsi_device *dsi)
> +{
> +	struct device *dev = &dsi->dev;
> +	struct visionox_g2647fb105 *ctx;
> +	int ret;
> +
> +	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> +	if (!ctx)
> +		return -ENOMEM;
> +
> +	ret = devm_regulator_bulk_get_const(dev,
> +					    ARRAY_SIZE(visionox_g2647fb105_supplies),
> +					    visionox_g2647fb105_supplies,
> +					    &ctx->supplies);
> +	if (ret < 0)
> +		return dev_err_probe(dev, ret, "Failed to get regulators\n");
> +
> +	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> +	if (IS_ERR(ctx->reset_gpio))
> +		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
> +				     "Failed to get reset-gpios\n");
> +
> +	ctx->dsi = dsi;
> +	mipi_dsi_set_drvdata(dsi, ctx);
> +
> +	dsi->lanes = 4;
> +	dsi->format = MIPI_DSI_FMT_RGB888;
> +	dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
> +			  MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM;
> +
> +	ctx->panel.prepare_prev_first = true;
> +
> +	drm_panel_init(&ctx->panel, dev, &visionox_g2647fb105_panel_funcs,
> +		       DRM_MODE_CONNECTOR_DSI);
> +	ctx->panel.prepare_prev_first = true;
> +
> +	ctx->panel.backlight = visionox_g2647fb105_create_backlight(dsi);
> +	if (IS_ERR(ctx->panel.backlight))
> +		return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
> +				     "Failed to create backlight\n");
> +
> +	drm_panel_add(&ctx->panel);
> +
> +	ret = devm_mipi_dsi_attach(dev, dsi);
> +	if (ret < 0) {
> +		drm_panel_remove(&ctx->panel);
> +		return dev_err_probe(dev, ret, "Failed to attach to DSI host\n");
> +	}
> +
> +	return 0;
> +}
> +
> +static void visionox_g2647fb105_remove(struct mipi_dsi_device *dsi)
> +{
> +	struct visionox_g2647fb105 *ctx = mipi_dsi_get_drvdata(dsi);
> +	drm_panel_remove(&ctx->panel);
> +}
> +
> +static const struct of_device_id visionox_g2647fb105_of_match[] = {
> +	{ .compatible = "visionox,g2647fb105" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, visionox_g2647fb105_of_match);
> +
> +static struct mipi_dsi_driver visionox_g2647fb105_driver = {
> +	.probe = visionox_g2647fb105_probe,
> +	.remove = visionox_g2647fb105_remove,
> +	.driver = {
> +		.name = "panel-visionox-g2647fb105",
> +		.of_match_table = visionox_g2647fb105_of_match,
> +	},
> +};
> +module_mipi_dsi_driver(visionox_g2647fb105_driver);
> +
> +MODULE_AUTHOR("Alexander Baransky <sanyapilot496@gmail.com>");
> +MODULE_DESCRIPTION("DRM driver for Visionox G2647FB105 AMOLED DSI panel");
> +MODULE_LICENSE("GPL");

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH v3 0/2] Add Visionox G2647FB105 panel support

[Neil Armstrong]

Hi,

On Mon, 14 Apr 2025 20:26:30 +0300, Alexander Baransky wrote:
> This patch series adds support for the Visionox G2647FB105 panel, used in:
> - Xiaomi Mi Note 10 / CC9 Pro (sm7150-xiaomi-tucana)
> - Xiaomi Mi Note 10 Lite (sm7150-xiaomi-toco)
> 
> Testing has been done by me on sm7150-xiaomi-tucana. According to the
> downstream DTS, this driver should be fully compatible with the
> sm7150-xiaomi-toco (unfortunately not tested) without requiring any
> modifications.
> 
> [...]

Thanks, Applied to https://gitlab.freedesktop.org/drm/misc/kernel.git (drm-misc-next)

[1/2] dt-bindings: display: panel: Add Visionox G2647FB105
      https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/7a5d0cbd8b19403ededbe84f21780f70632d1e09
[2/2] drm/panel: Add Visionox G2647FB105 panel driver
      https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/3d55aebe257ec49f577deb7c8e4acb40dabc05e4

-- 
Neil