From: Shannon Nelson <shannon.nelson@amd.com>
To: <andrew+netdev@lunn.ch>, <davem@davemloft.net>,
<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <brett.creeley@amd.com>, Shannon Nelson <shannon.nelson@amd.com>
Subject: [PATCH v2 net-next 1/3] ionic: extend the QSFP module sprom for more pages
Date: Tue, 15 Apr 2025 16:13:14 -0700 [thread overview]
Message-ID: <20250415231317.40616-2-shannon.nelson@amd.com> (raw)
In-Reply-To: <20250415231317.40616-1-shannon.nelson@amd.com>
Some QSFP modules have more eeprom to be read by ethtool than
the initial high and low page 0 that is currently available
in the DSC's ionic sprom[] buffer. Since the current sprom[]
is baked into the middle of an existing API struct, to make
the high end of page 1 and page 2 available a block is carved
from a reserved space of the existing port_info struct and the
ionic_get_module_eeprom() service is taught how to get there.
Newer firmware writes the additional QSFP page info here,
yet this remains backward compatible because older firmware
sets this space to all 0 and older ionic drivers do not use
the reserved space.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
---
.../ethernet/pensando/ionic/ionic_ethtool.c | 66 ++++++++++++++-----
.../net/ethernet/pensando/ionic/ionic_if.h | 7 +-
2 files changed, 56 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c b/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c
index a2d4336d2766..66f172e28f8b 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c
@@ -968,10 +968,13 @@ static int ionic_get_module_info(struct net_device *netdev,
break;
case SFF8024_ID_QSFP_8436_8636:
case SFF8024_ID_QSFP28_8636:
- case SFF8024_ID_QSFP_PLUS_CMIS:
modinfo->type = ETH_MODULE_SFF_8436;
modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
break;
+ case SFF8024_ID_QSFP_PLUS_CMIS:
+ modinfo->type = ETH_MODULE_SFF_8472;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+ break;
default:
netdev_info(netdev, "unknown xcvr type 0x%02x\n",
xcvr->sprom[0]);
@@ -983,29 +986,20 @@ static int ionic_get_module_info(struct net_device *netdev,
return 0;
}
-static int ionic_get_module_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *ee,
- u8 *data)
+static int ionic_do_module_copy(u8 *dst, u8 *src, u32 len)
{
- struct ionic_lif *lif = netdev_priv(netdev);
- struct ionic_dev *idev = &lif->ionic->idev;
- struct ionic_xcvr_status *xcvr;
- char tbuf[sizeof(xcvr->sprom)];
+ char tbuf[sizeof_field(struct ionic_xcvr_status, sprom)];
int count = 10;
- u32 len;
/* The NIC keeps the module prom up-to-date in the DMA space
* so we can simply copy the module bytes into the data buffer.
*/
- xcvr = &idev->port_info->status.xcvr;
- len = min_t(u32, sizeof(xcvr->sprom), ee->len);
-
do {
- memcpy(data, &xcvr->sprom[ee->offset], len);
- memcpy(tbuf, &xcvr->sprom[ee->offset], len);
+ memcpy(dst, src, len);
+ memcpy(tbuf, src, len);
/* Let's make sure we got a consistent copy */
- if (!memcmp(data, tbuf, len))
+ if (!memcmp(dst, tbuf, len))
break;
} while (--count);
@@ -1016,6 +1010,48 @@ static int ionic_get_module_eeprom(struct net_device *netdev,
return 0;
}
+static int ionic_get_module_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *ee,
+ u8 *data)
+{
+ struct ionic_lif *lif = netdev_priv(netdev);
+ struct ionic_dev *idev = &lif->ionic->idev;
+ u32 start = ee->offset;
+ u32 err = -EINVAL;
+ u32 size = 0;
+ u8 *src;
+
+ if (start < ETH_MODULE_SFF_8079_LEN) {
+ if (start + ee->len > ETH_MODULE_SFF_8079_LEN)
+ size = ETH_MODULE_SFF_8079_LEN - start;
+ else
+ size = ee->len;
+
+ src = &idev->port_info->status.xcvr.sprom[start];
+ err = ionic_do_module_copy(data, src, size);
+ if (err)
+ return err;
+
+ data += size;
+ start += size;
+ }
+
+ if (start >= ETH_MODULE_SFF_8079_LEN &&
+ start < ETH_MODULE_SFF_8472_LEN) {
+ size = ee->len - size;
+ if (start + size > ETH_MODULE_SFF_8472_LEN)
+ size = ETH_MODULE_SFF_8472_LEN - start;
+
+ start -= ETH_MODULE_SFF_8079_LEN;
+ src = &idev->port_info->sprom_epage[start];
+ err = ionic_do_module_copy(data, src, size);
+ if (err)
+ return err;
+ }
+
+ return err;
+}
+
static int ionic_get_ts_info(struct net_device *netdev,
struct kernel_ethtool_ts_info *info)
{
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_if.h b/drivers/net/ethernet/pensando/ionic/ionic_if.h
index 830c8adbfbee..4943ebb27ab3 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_if.h
+++ b/drivers/net/ethernet/pensando/ionic/ionic_if.h
@@ -2839,6 +2839,7 @@ union ionic_port_identity {
* @status: Port status data
* @stats: Port statistics data
* @mgmt_stats: Port management statistics data
+ * @sprom_epage: Extended Transceiver sprom, high page 1 and 2
* @rsvd: reserved byte(s)
* @pb_stats: uplink pb drop stats
*/
@@ -2849,8 +2850,10 @@ struct ionic_port_info {
struct ionic_port_stats stats;
struct ionic_mgmt_port_stats mgmt_stats;
};
- /* room for pb_stats to start at 2k offset */
- u8 rsvd[760];
+ u8 sprom_epage[256];
+ u8 rsvd[504];
+
+ /* pb_stats must start at 2k offset */
struct ionic_port_pb_stats pb_stats;
};
--
2.17.1
next prev parent reply other threads:[~2025-04-15 23:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-15 23:13 [PATCH v2 net-next 0/3] ionic: support QSFP CMIS Shannon Nelson
2025-04-15 23:13 ` Shannon Nelson [this message]
2025-04-21 10:54 ` [PATCH v2 net-next 1/3] ionic: extend the QSFP module sprom for more pages Simon Horman
2025-04-15 23:13 ` [PATCH v2 net-next 2/3] ionic: support ethtool get_module_eeprom_by_page Shannon Nelson
2025-04-21 10:54 ` Simon Horman
2025-04-15 23:13 ` [PATCH v2 net-next 3/3] ionic: add module eeprom channel data to ionic_if and ethtool Shannon Nelson
2025-04-21 10:54 ` Simon Horman
2025-04-22 10:40 ` [PATCH v2 net-next 0/3] ionic: support QSFP CMIS patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250415231317.40616-2-shannon.nelson@amd.com \
--to=shannon.nelson@amd.com \
--cc=andrew+netdev@lunn.ch \
--cc=brett.creeley@amd.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®