mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Shannon Nelson <shannon.nelson@amd.com>
To: <andrew+netdev@lunn.ch>, <davem@davemloft.net>,
	<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>,
	<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <brett.creeley@amd.com>, Shannon Nelson <shannon.nelson@amd.com>
Subject: [PATCH v2 net-next 2/3] ionic: support ethtool get_module_eeprom_by_page
Date: Tue, 15 Apr 2025 16:13:15 -0700	[thread overview]
Message-ID: <20250415231317.40616-3-shannon.nelson@amd.com> (raw)
In-Reply-To: <20250415231317.40616-1-shannon.nelson@amd.com>

Add support for the newer get_module_eeprom_by_page interface.
Only the upper half of the 256 byte page is available for
reading, and the firmware puts the two sections into the
extended sprom buffer, so a union is used over the extended
sprom buffer to make clear which page is to be accessed.

With get_module_eeprom_by_page implemented there is no need
for the older get_module_info or git_module_eeprom interfaces,
so remove them.

Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
---
 .../ethernet/pensando/ionic/ionic_ethtool.c   | 96 ++++++-------------
 .../net/ethernet/pensando/ionic/ionic_if.h    | 12 ++-
 2 files changed, 37 insertions(+), 71 deletions(-)

diff --git a/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c b/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c
index 66f172e28f8b..0d2ef808237b 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c
@@ -948,44 +948,6 @@ static int ionic_get_tunable(struct net_device *netdev,
 	return 0;
 }
 
-static int ionic_get_module_info(struct net_device *netdev,
-				 struct ethtool_modinfo *modinfo)
-
-{
-	struct ionic_lif *lif = netdev_priv(netdev);
-	struct ionic_dev *idev = &lif->ionic->idev;
-	struct ionic_xcvr_status *xcvr;
-	struct sfp_eeprom_base *sfp;
-
-	xcvr = &idev->port_info->status.xcvr;
-	sfp = (struct sfp_eeprom_base *) xcvr->sprom;
-
-	/* report the module data type and length */
-	switch (sfp->phys_id) {
-	case SFF8024_ID_SFP:
-		modinfo->type = ETH_MODULE_SFF_8079;
-		modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
-		break;
-	case SFF8024_ID_QSFP_8436_8636:
-	case SFF8024_ID_QSFP28_8636:
-		modinfo->type = ETH_MODULE_SFF_8436;
-		modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
-		break;
-	case SFF8024_ID_QSFP_PLUS_CMIS:
-		modinfo->type = ETH_MODULE_SFF_8472;
-		modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
-		break;
-	default:
-		netdev_info(netdev, "unknown xcvr type 0x%02x\n",
-			    xcvr->sprom[0]);
-		modinfo->type = 0;
-		modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
-		break;
-	}
-
-	return 0;
-}
-
 static int ionic_do_module_copy(u8 *dst, u8 *src, u32 len)
 {
 	char tbuf[sizeof_field(struct ionic_xcvr_status, sprom)];
@@ -1010,46 +972,43 @@ static int ionic_do_module_copy(u8 *dst, u8 *src, u32 len)
 	return 0;
 }
 
-static int ionic_get_module_eeprom(struct net_device *netdev,
-				   struct ethtool_eeprom *ee,
-				   u8 *data)
+static int ionic_get_module_eeprom_by_page(struct net_device *netdev,
+					   const struct ethtool_module_eeprom *page_data,
+					   struct netlink_ext_ack *extack)
 {
 	struct ionic_lif *lif = netdev_priv(netdev);
 	struct ionic_dev *idev = &lif->ionic->idev;
-	u32 start = ee->offset;
 	u32 err = -EINVAL;
-	u32 size = 0;
 	u8 *src;
 
-	if (start < ETH_MODULE_SFF_8079_LEN) {
-		if (start + ee->len > ETH_MODULE_SFF_8079_LEN)
-			size = ETH_MODULE_SFF_8079_LEN - start;
-		else
-			size = ee->len;
-
-		src = &idev->port_info->status.xcvr.sprom[start];
-		err = ionic_do_module_copy(data, src, size);
-		if (err)
-			return err;
+	if (!page_data->length)
+		return -EINVAL;
 
-		data += size;
-		start += size;
+	if (page_data->bank != 0) {
+		NL_SET_ERR_MSG_MOD(extack, "Only bank 0 is supported");
+		return -EINVAL;
 	}
 
-	if (start >= ETH_MODULE_SFF_8079_LEN &&
-	    start < ETH_MODULE_SFF_8472_LEN) {
-		size = ee->len - size;
-		if (start + size > ETH_MODULE_SFF_8472_LEN)
-			size = ETH_MODULE_SFF_8472_LEN - start;
-
-		start -= ETH_MODULE_SFF_8079_LEN;
-		src = &idev->port_info->sprom_epage[start];
-		err = ionic_do_module_copy(data, src, size);
-		if (err)
-			return err;
+	switch (page_data->page) {
+	case 0:
+		src = &idev->port_info->status.xcvr.sprom[page_data->offset];
+		break;
+	case 1:
+		src = &idev->port_info->sprom_page1[page_data->offset - 128];
+		break;
+	case 2:
+		src = &idev->port_info->sprom_page2[page_data->offset - 128];
+		break;
+	default:
+		return -EOPNOTSUPP;
 	}
 
-	return err;
+	memset(page_data->data, 0, page_data->length);
+	err = ionic_do_module_copy(page_data->data, src, page_data->length);
+	if (err)
+		return err;
+
+	return page_data->length;
 }
 
 static int ionic_get_ts_info(struct net_device *netdev,
@@ -1197,8 +1156,7 @@ static const struct ethtool_ops ionic_ethtool_ops = {
 	.set_rxfh		= ionic_set_rxfh,
 	.get_tunable		= ionic_get_tunable,
 	.set_tunable		= ionic_set_tunable,
-	.get_module_info	= ionic_get_module_info,
-	.get_module_eeprom	= ionic_get_module_eeprom,
+	.get_module_eeprom_by_page	= ionic_get_module_eeprom_by_page,
 	.get_pauseparam		= ionic_get_pauseparam,
 	.set_pauseparam		= ionic_set_pauseparam,
 	.get_fecparam		= ionic_get_fecparam,
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_if.h b/drivers/net/ethernet/pensando/ionic/ionic_if.h
index 4943ebb27ab3..23218208b711 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_if.h
+++ b/drivers/net/ethernet/pensando/ionic/ionic_if.h
@@ -2839,7 +2839,9 @@ union ionic_port_identity {
  * @status:          Port status data
  * @stats:           Port statistics data
  * @mgmt_stats:      Port management statistics data
- * @sprom_epage:     Extended Transceiver sprom, high page 1 and 2
+ * @sprom_epage:     Extended Transceiver sprom
+ * @sprom_page1:     Extended Transceiver sprom, page 1
+ * @sprom_page2:     Extended Transceiver sprom, page 2
  * @rsvd:            reserved byte(s)
  * @pb_stats:        uplink pb drop stats
  */
@@ -2850,7 +2852,13 @@ struct ionic_port_info {
 		struct ionic_port_stats      stats;
 		struct ionic_mgmt_port_stats mgmt_stats;
 	};
-	u8     sprom_epage[256];
+	union {
+		u8     sprom_epage[256];
+		struct {
+			u8 sprom_page1[128];
+			u8 sprom_page2[128];
+		};
+	};
 	u8     rsvd[504];
 
 	/* pb_stats must start at 2k offset */
-- 
2.17.1


  parent reply	other threads:[~2025-04-15 23:13 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-15 23:13 [PATCH v2 net-next 0/3] ionic: support QSFP CMIS Shannon Nelson
2025-04-15 23:13 ` [PATCH v2 net-next 1/3] ionic: extend the QSFP module sprom for more pages Shannon Nelson
2025-04-21 10:54   ` Simon Horman
2025-04-15 23:13 ` Shannon Nelson [this message]
2025-04-21 10:54   ` [PATCH v2 net-next 2/3] ionic: support ethtool get_module_eeprom_by_page Simon Horman
2025-04-15 23:13 ` [PATCH v2 net-next 3/3] ionic: add module eeprom channel data to ionic_if and ethtool Shannon Nelson
2025-04-21 10:54   ` Simon Horman
2025-04-22 10:40 ` [PATCH v2 net-next 0/3] ionic: support QSFP CMIS patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250415231317.40616-3-shannon.nelson@amd.com \
    --to=shannon.nelson@amd.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=brett.creeley@amd.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®