[PATCH AUTOSEL 5.4 1/3] scsi: pm80xx: Set phy_attached to zero when device is gone

[PATCH AUTOSEL 5.4 1/3] scsi: pm80xx: Set phy_attached to zero when device is gone

[Sasha Levin]

From: Igor Pylypiv <ipylypiv@google.com>

[ Upstream commit f7b705c238d1483f0a766e2b20010f176e5c0fb7 ]

When a fatal error occurs, a phy down event may not be received to set
phy->phy_attached to zero.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20250319230305.3172920-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm8001_sas.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 36f5bab09f73e..1215fc36862da 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -893,6 +893,7 @@ static void pm8001_dev_gone_notify(struct domain_device *dev)
 			spin_lock_irqsave(&pm8001_ha->lock, flags);
 		}
 		PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
+		pm8001_ha->phy[pm8001_dev->attached_phy].phy_attached = 0;
 		pm8001_free_dev(pm8001_dev);
 	} else {
 		PM8001_DISC_DBG(pm8001_ha,
-- 
2.39.5

[PATCH AUTOSEL 5.4 2/3] md/raid1: Add check for missing source disk in process_checks()

[Sasha Levin]

From: Meir Elisha <meir.elisha@volumez.com>

[ Upstream commit b7c178d9e57c8fd4238ff77263b877f6f16182ba ]

During recovery/check operations, the process_checks function loops
through available disks to find a 'primary' source with successfully
read data.

If no suitable source disk is found after checking all possibilities,
the 'primary' index will reach conf->raid_disks * 2. Add an explicit
check for this condition after the loop. If no source disk was found,
print an error message and return early to prevent further processing
without a valid primary source.

Link: https://lore.kernel.org/linux-raid/20250408143808.1026534-1-meir.elisha@volumez.com
Signed-off-by: Meir Elisha <meir.elisha@volumez.com>
Suggested-and-reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid1.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index c40237cfdcb0f..395a279e2c885 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -2051,14 +2051,9 @@ static int fix_sync_read_error(struct r1bio *r1_bio)
 				if (!rdev_set_badblocks(rdev, sect, s, 0))
 					abort = 1;
 			}
-			if (abort) {
-				conf->recovery_disabled =
-					mddev->recovery_disabled;
-				set_bit(MD_RECOVERY_INTR, &mddev->recovery);
-				md_done_sync(mddev, r1_bio->sectors, 0);
-				put_buf(r1_bio);
+			if (abort)
 				return 0;
-			}
+
 			/* Try next page */
 			sectors -= s;
 			sect += s;
@@ -2198,10 +2193,21 @@ static void sync_request_write(struct mddev *mddev, struct r1bio *r1_bio)
 	int disks = conf->raid_disks * 2;
 	struct bio *wbio;
 
-	if (!test_bit(R1BIO_Uptodate, &r1_bio->state))
-		/* ouch - failed to read all of that. */
-		if (!fix_sync_read_error(r1_bio))
+	if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) {
+		/*
+		 * ouch - failed to read all of that.
+		 * No need to fix read error for check/repair
+		 * because all member disks are read.
+		 */
+		if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) ||
+		    !fix_sync_read_error(r1_bio)) {
+			conf->recovery_disabled = mddev->recovery_disabled;
+			set_bit(MD_RECOVERY_INTR, &mddev->recovery);
+			md_done_sync(mddev, r1_bio->sectors, 0);
+			put_buf(r1_bio);
 			return;
+		}
+	}
 
 	if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
 		process_checks(r1_bio);
-- 
2.39.5

[PATCH AUTOSEL 5.4 3/3] riscv: Avoid fortify warning in syscall_get_arguments()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit 1413708f990cb7d025affd706ba9c23e2bfc1a27 ]

When building with CONFIG_FORTIFY_SOURCE=y and W=1, there is a warning
because of the memcpy() in syscall_get_arguments():

  In file included from include/linux/string.h:392,
                   from include/linux/bitmap.h:13,
                   from include/linux/cpumask.h:12,
                   from arch/riscv/include/asm/processor.h:55,
                   from include/linux/sched.h:13,
                   from kernel/ptrace.c:13:
  In function 'fortify_memcpy_chk',
      inlined from 'syscall_get_arguments.isra' at arch/riscv/include/asm/syscall.h:66:2:
  include/linux/fortify-string.h:580:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
    580 |                         __read_overflow2_field(q_size_field, size);
        |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

The fortified memcpy() routine enforces that the source is not overread
and the destination is not overwritten if the size of either field and
the size of the copy are known at compile time. The memcpy() in
syscall_get_arguments() intentionally overreads from a1 to a5 in
'struct pt_regs' but this is bigger than the size of a1.

Normally, this could be solved by wrapping a1 through a5 with
struct_group() but there was already a struct_group() applied to these
members in commit bba547810c66 ("riscv: tracing: Fix
__write_overflow_field in ftrace_partial_regs()").

Just avoid memcpy() altogether and write the copying of args from regs
manually, which clears up the warning at the expense of three extra
lines of code.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Dmitry V. Levin <ldv@strace.io>
Link: https://lore.kernel.org/r/20250409-riscv-avoid-fortify-warning-syscall_get_arguments-v1-1-7853436d4755@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/include/asm/syscall.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/include/asm/syscall.h b/arch/riscv/include/asm/syscall.h
index 42347d0981e7e..e53690b30bbeb 100644
--- a/arch/riscv/include/asm/syscall.h
+++ b/arch/riscv/include/asm/syscall.h
@@ -67,8 +67,11 @@ static inline void syscall_get_arguments(struct task_struct *task,
 					 unsigned long *args)
 {
 	args[0] = regs->orig_a0;
-	args++;
-	memcpy(args, &regs->a1, 5 * sizeof(args[0]));
+	args[1] = regs->a1;
+	args[2] = regs->a2;
+	args[3] = regs->a3;
+	args[4] = regs->a4;
+	args[5] = regs->a5;
 }
 
 static inline void syscall_set_arguments(struct task_struct *task,
-- 
2.39.5