From: Inochi Amaoto <inochiama@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Alexandre Ghiti <alex@ghiti.fr>,
Chen Wang <unicorn_wang@outlook.com>,
Inochi Amaoto <inochiama@gmail.com>,
Alexander Sverdlin <alexander.sverdlin@gmail.com>,
Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
sophgo@lists.linux.dev, linux-kernel@vger.kernel.org,
Yixun Lan <dlan@gentoo.org>, Longbin Li <looong.bin@gmail.com>
Subject: [PATCH 4/4] riscv: dts: sopgho: use SOC_PERIPHERAL_IRQ to calculate interrupt number
Date: Wed, 30 Apr 2025 09:26:53 +0800 [thread overview]
Message-ID: <20250430012654.235830-5-inochiama@gmail.com> (raw)
In-Reply-To: <20250430012654.235830-1-inochiama@gmail.com>
Since riscv and arm architecture use different interrupt definitions,
use a macro SOC_PERIPHERAL_IRQ mask this difference.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
---
arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 2 ++
arch/riscv/boot/dts/sophgo/cv180x.dtsi | 44 ++++++++++++-------------
arch/riscv/boot/dts/sophgo/cv1812h.dtsi | 2 ++
arch/riscv/boot/dts/sophgo/cv181x.dtsi | 2 +-
arch/riscv/boot/dts/sophgo/sg2002.dtsi | 2 ++
5 files changed, 29 insertions(+), 23 deletions(-)
diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
index d0a627c086fb..88707cc13fb4 100644
--- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
@@ -3,6 +3,8 @@
* Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
*/
+#define SOC_PERIPHERAL_IRQ(nr) ((nr) + 16)
+
#include <dt-bindings/pinctrl/pinctrl-cv1800b.h>
#include "cv180x-cpus.dtsi"
#include "cv180x.dtsi"
diff --git a/arch/riscv/boot/dts/sophgo/cv180x.dtsi b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
index a4f957302094..ad5052bf36e5 100644
--- a/arch/riscv/boot/dts/sophgo/cv180x.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
@@ -38,7 +38,7 @@ porta: gpio-controller@0 {
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(44) IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -56,7 +56,7 @@ portb: gpio-controller@0 {
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(45) IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -74,7 +74,7 @@ portc: gpio-controller@0 {
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(46) IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -92,7 +92,7 @@ portd: gpio-controller@0 {
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(47) IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -100,7 +100,7 @@ saradc: adc@30f0000 {
compatible = "sophgo,cv1800b-saradc";
reg = <0x030f0000 0x1000>;
clocks = <&clk CLK_SARADC>;
- interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(84) IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -125,7 +125,7 @@ i2c0: i2c@4000000 {
#size-cells = <0>;
clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C0>;
clock-names = "ref", "pclk";
- interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(33) IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -136,7 +136,7 @@ i2c1: i2c@4010000 {
#size-cells = <0>;
clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C1>;
clock-names = "ref", "pclk";
- interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -147,7 +147,7 @@ i2c2: i2c@4020000 {
#size-cells = <0>;
clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C2>;
clock-names = "ref", "pclk";
- interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(35) IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -158,7 +158,7 @@ i2c3: i2c@4030000 {
#size-cells = <0>;
clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C3>;
clock-names = "ref", "pclk";
- interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(36) IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -169,14 +169,14 @@ i2c4: i2c@4040000 {
#size-cells = <0>;
clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C4>;
clock-names = "ref", "pclk";
- interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(37) IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart0: serial@4140000 {
compatible = "snps,dw-apb-uart";
reg = <0x04140000 0x100>;
- interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(28) IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk CLK_UART0>, <&clk CLK_APB_UART0>;
clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
@@ -187,7 +187,7 @@ uart0: serial@4140000 {
uart1: serial@4150000 {
compatible = "snps,dw-apb-uart";
reg = <0x04150000 0x100>;
- interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(29) IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk CLK_UART1>, <&clk CLK_APB_UART1>;
clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
@@ -198,7 +198,7 @@ uart1: serial@4150000 {
uart2: serial@4160000 {
compatible = "snps,dw-apb-uart";
reg = <0x04160000 0x100>;
- interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(30) IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk CLK_UART2>, <&clk CLK_APB_UART2>;
clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
@@ -209,7 +209,7 @@ uart2: serial@4160000 {
uart3: serial@4170000 {
compatible = "snps,dw-apb-uart";
reg = <0x04170000 0x100>;
- interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(31) IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk CLK_UART3>, <&clk CLK_APB_UART3>;
clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
@@ -224,7 +224,7 @@ spi0: spi@4180000 {
#size-cells = <0>;
clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI0>;
clock-names = "ssi_clk", "pclk";
- interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(38) IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -235,7 +235,7 @@ spi1: spi@4190000 {
#size-cells = <0>;
clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI1>;
clock-names = "ssi_clk", "pclk";
- interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(39) IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -246,7 +246,7 @@ spi2: spi@41a0000 {
#size-cells = <0>;
clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI2>;
clock-names = "ssi_clk", "pclk";
- interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(40) IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -257,14 +257,14 @@ spi3: spi@41b0000 {
#size-cells = <0>;
clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI3>;
clock-names = "ssi_clk", "pclk";
- interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(41) IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart4: serial@41c0000 {
compatible = "snps,dw-apb-uart";
reg = <0x041c0000 0x100>;
- interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(32) IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk CLK_UART4>, <&clk CLK_APB_UART4>;
clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
@@ -275,7 +275,7 @@ uart4: serial@41c0000 {
sdhci0: mmc@4310000 {
compatible = "sophgo,cv1800b-dwcmshc";
reg = <0x4310000 0x1000>;
- interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(20) IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk CLK_AXI4_SD0>,
<&clk CLK_SD0>;
clock-names = "core", "bus";
@@ -285,7 +285,7 @@ sdhci0: mmc@4310000 {
sdhci1: mmc@4320000 {
compatible = "sophgo,cv1800b-dwcmshc";
reg = <0x4320000 0x1000>;
- interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(22) IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk CLK_AXI4_SD1>,
<&clk CLK_SD1>;
clock-names = "core", "bus";
@@ -295,7 +295,7 @@ sdhci1: mmc@4320000 {
dmac: dma-controller@4330000 {
compatible = "snps,axi-dma-1.01a";
reg = <0x04330000 0x1000>;
- interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(13) IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk CLK_SDMA_AXI>, <&clk CLK_SDMA_AXI>;
clock-names = "core-clk", "cfgr-clk";
#dma-cells = <1>;
diff --git a/arch/riscv/boot/dts/sophgo/cv1812h.dtsi b/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
index d9580a2e1e7f..0974955e4e05 100644
--- a/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
@@ -3,6 +3,8 @@
* Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
*/
+#define SOC_PERIPHERAL_IRQ(nr) ((nr) + 16)
+
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/pinctrl-cv1812h.h>
#include "cv180x-cpus.dtsi"
diff --git a/arch/riscv/boot/dts/sophgo/cv181x.dtsi b/arch/riscv/boot/dts/sophgo/cv181x.dtsi
index 5fd14dd1b14f..bbdb30653e9a 100644
--- a/arch/riscv/boot/dts/sophgo/cv181x.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv181x.dtsi
@@ -11,7 +11,7 @@ soc {
emmc: mmc@4300000 {
compatible = "sophgo,cv1800b-dwcmshc";
reg = <0x4300000 0x1000>;
- interrupts = <34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(18) IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk CLK_AXI4_EMMC>,
<&clk CLK_EMMC>;
clock-names = "core", "bus";
diff --git a/arch/riscv/boot/dts/sophgo/sg2002.dtsi b/arch/riscv/boot/dts/sophgo/sg2002.dtsi
index 60709df12a22..6f09c9199102 100644
--- a/arch/riscv/boot/dts/sophgo/sg2002.dtsi
+++ b/arch/riscv/boot/dts/sophgo/sg2002.dtsi
@@ -3,6 +3,8 @@
* Copyright (C) 2024 Thomas Bonnefille <thomas.bonnefille@bootlin.com>
*/
+#define SOC_PERIPHERAL_IRQ(nr) ((nr) + 16)
+
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/pinctrl-sg2002.h>
#include "cv180x-cpus.dtsi"
--
2.49.0
next prev parent reply other threads:[~2025-04-30 1:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-30 1:26 [PATCH 0/4] riscv: sophgo: cv18xx: dts rework, part 1 Inochi Amaoto
2025-04-30 1:26 ` [PATCH 1/4] riscv: dts: sophgo: Move all soc specific device into soc dtsi file Inochi Amaoto
2025-04-30 15:19 ` Alexander Sverdlin
2025-05-02 0:43 ` Yixun Lan
2025-04-30 1:26 ` [PATCH 2/4] riscv: dts: sophgo: Move riscv cpu definition to a separate file Inochi Amaoto
2025-04-30 1:26 ` [PATCH 3/4] riscv: dts: sophgo: rename header file cv18xx.dtsi to cv180x.dtsi Inochi Amaoto
2025-04-30 15:25 ` Alexander Sverdlin
2025-04-30 1:26 ` Inochi Amaoto [this message]
2025-05-13 4:18 ` [PATCH 0/4] riscv: sophgo: cv18xx: dts rework, part 1 Inochi Amaoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250430012654.235830-5-inochiama@gmail.com \
--to=inochiama@gmail.com \
--cc=alex@ghiti.fr \
--cc=alexander.sverdlin@gmail.com \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlan@gentoo.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=looong.bin@gmail.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
--cc=sophgo@lists.linux.dev \
--cc=thomas.bonnefille@bootlin.com \
--cc=unicorn_wang@outlook.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®