[PATCH v3 6/9] ASoC: codec: cs42l73: Convert to GPIO descriptors

["Peng Fan (OSS)" <peng.fan@oss.nxp.com>]

From: Peng Fan <peng.fan@nxp.com>

of_gpio.h is deprecated, update the driver to use GPIO descriptors.
 - Use devm_gpiod_get_optional to get GPIO descriptor with default
   polarity GPIOD_OUT_LOW, set consumer name.
 - Use gpiod_set_value_cansleep to configure output value.

Checking the current driver using legacy GPIO API, the
reset value is first output HIGH, then LOW, then HIGH.

Checking the datasheet, Hold RESET LOW (active) until all the power
supply rails have risen to greater than or equal to the minimum
recommended operating voltages.

Since the driver has been here for quite long time and no complain on
the reset flow, still follow original flow when using GPIOD
descriptors.

Per datasheet, the DTS polarity should be GPIOD_ACTIVE_LOW. The binding
example use value 0(GPIOD_ACTIVE_HIGH) which seems wrong. There is
no in-tree DTS has the device, so all should be fine.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 sound/soc/codecs/cs42l73.c | 26 +++++++++++---------------
 1 file changed, 11 insertions(+), 15 deletions(-)

diff --git a/sound/soc/codecs/cs42l73.c b/sound/soc/codecs/cs42l73.c
index c09c23487d2e73340b8947ed0e1ffadb24414e7c..535a867f9f2a6d32986190c4302dfeb1e9f06913 100644
--- a/sound/soc/codecs/cs42l73.c
+++ b/sound/soc/codecs/cs42l73.c
@@ -9,12 +9,12 @@
  */
 
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/of_gpio.h>
 #include <linux/pm.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -30,7 +30,7 @@
 
 struct cs42l73_platform_data {
 	/* RST GPIO */
-	unsigned int reset_gpio;
+	struct gpio_desc *reset_gpio;
 	unsigned int chgfreq;
 	int jack_detection;
 	unsigned int mclk_freq;
@@ -1307,23 +1307,19 @@ static int cs42l73_i2c_probe(struct i2c_client *i2c_client)
 		if (of_property_read_u32(i2c_client->dev.of_node, "chgfreq", &val32) >= 0)
 			pdata->chgfreq = val32;
 	}
-	pdata->reset_gpio = of_get_named_gpio(i2c_client->dev.of_node, "reset-gpio", 0);
+	pdata->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev, "reset", GPIOD_OUT_LOW);
+
+	if (IS_ERR(pdata->reset_gpio))
+		return PTR_ERR(pdata->reset_gpio);
+
+	gpiod_set_consumer_name(pdata->reset_gpio, "CS42L73 /RST");
 	cs42l73->pdata = *pdata;
 
 	i2c_set_clientdata(i2c_client, cs42l73);
 
 	if (cs42l73->pdata.reset_gpio) {
-		ret = devm_gpio_request_one(&i2c_client->dev,
-					    cs42l73->pdata.reset_gpio,
-					    GPIOF_OUT_INIT_HIGH,
-					    "CS42L73 /RST");
-		if (ret < 0) {
-			dev_err(&i2c_client->dev, "Failed to request /RST %d: %d\n",
-				cs42l73->pdata.reset_gpio, ret);
-			return ret;
-		}
-		gpio_set_value_cansleep(cs42l73->pdata.reset_gpio, 0);
-		gpio_set_value_cansleep(cs42l73->pdata.reset_gpio, 1);
+		gpiod_set_value_cansleep(cs42l73->pdata.reset_gpio, 1);
+		gpiod_set_value_cansleep(cs42l73->pdata.reset_gpio, 0);
 	}
 
 	/* initialize codec */
@@ -1360,7 +1356,7 @@ static int cs42l73_i2c_probe(struct i2c_client *i2c_client)
 	return 0;
 
 err_reset:
-	gpio_set_value_cansleep(cs42l73->pdata.reset_gpio, 0);
+	gpiod_set_value_cansleep(cs42l73->pdata.reset_gpio, 1);
 
 	return ret;
 }

-- 
2.37.1