[PATCH v3 9/9] ASoC: codec: cs42l52: Convert to GPIO descriptors

["Peng Fan (OSS)" <peng.fan@oss.nxp.com>]

From: Peng Fan <peng.fan@nxp.com>

of_gpio.h is deprecated, update the driver to use GPIO descriptors.
 - Use devm_gpiod_get_optional to get GPIO descriptor with default
   polarity GPIOD_OUT_LOW, set consumer name.
 - Use gpiod_set_value_cansleep to configure output value.

Checking the current driver using legacy GPIO API, the
reset value is first output HIGH, then LOW, then HIGH.

Checking the datasheet, the device remains in Power-down state until
RESET pin is brought high.

Since the driver has been here for quite long time and no complain on
the reset flow, still follow original flow when using GPIOD
descriptors.

Per datasheet, the DTS polarity should be GPIOD_ACTIVE_LOW. The binding
example use value 0(GPIOD_ACTIVE_HIGH) which seems wrong.
And the binding use reset-gpio as example, not same as driver using
"cirrus,reset-gpio", and there is no in-tree DTS has the device,
so all should be fine with this patch.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 sound/soc/codecs/cs42l52.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)

diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c
index aa8c001cce099e3c1dfc979678fe8000caed097f..a9ffba62aaf88c55a715d83609382d6fc5cfaa8d 100644
--- a/sound/soc/codecs/cs42l52.c
+++ b/sound/soc/codecs/cs42l52.c
@@ -9,13 +9,13 @@
  */
 
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/input.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/of_gpio.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -50,7 +50,7 @@ struct cs42l52_platform_data {
 	unsigned int chgfreq;
 
 	/* Reset GPIO */
-	unsigned int reset_gpio;
+	struct gpio_desc *reset_gpio;
 };
 
 struct  cs42l52_private {
@@ -1146,25 +1146,21 @@ static int cs42l52_i2c_probe(struct i2c_client *i2c_client)
 			"cirrus,chgfreq-divisor", &val32) >= 0)
 			pdata->chgfreq = val32;
 
-		pdata->reset_gpio =
-			of_get_named_gpio(i2c_client->dev.of_node,
-					"cirrus,reset-gpio", 0);
+		pdata->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev,
+							    "cirrus,reset",
+							    GPIOD_OUT_LOW);
+
+		if (IS_ERR(pdata->reset_gpio))
+			return PTR_ERR(pdata->reset_gpio);
+
+		gpiod_set_consumer_name(pdata->reset_gpio, "CS42L52 /RST");
 	}
 
 	cs42l52->pdata = *pdata;
 
 	if (cs42l52->pdata.reset_gpio) {
-		ret = devm_gpio_request_one(&i2c_client->dev,
-					    cs42l52->pdata.reset_gpio,
-					    GPIOF_OUT_INIT_HIGH,
-					    "CS42L52 /RST");
-		if (ret < 0) {
-			dev_err(&i2c_client->dev, "Failed to request /RST %d: %d\n",
-				cs42l52->pdata.reset_gpio, ret);
-			return ret;
-		}
-		gpio_set_value_cansleep(cs42l52->pdata.reset_gpio, 0);
-		gpio_set_value_cansleep(cs42l52->pdata.reset_gpio, 1);
+		gpiod_set_value_cansleep(cs42l52->pdata.reset_gpio, 1);
+		gpiod_set_value_cansleep(cs42l52->pdata.reset_gpio, 0);
 	}
 
 	i2c_set_clientdata(i2c_client, cs42l52);

-- 
2.37.1