[PATCH v2] comedi: drivers: adl_pci9118.c: Edit file so that checkpatch.pl has 0 typo errors

[PATCH v2] comedi: drivers: adl_pci9118.c: Edit file so that checkpatch.pl has 0 typo errors

[Heikki Huttu]

Fix errors produced by checkpath.pl about typos.

Signed-off-by: Heikki Huttu <heissendo88@gmail.com>
---

V2: Removed all modifications done to parenthesis. Edit Patch name and
only typo fixes remain.

 drivers/comedi/drivers/adl_pci9118.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/comedi/drivers/adl_pci9118.c b/drivers/comedi/drivers/adl_pci9118.c
index a76e2666d583..67c663892e48 100644
--- a/drivers/comedi/drivers/adl_pci9118.c
+++ b/drivers/comedi/drivers/adl_pci9118.c
@@ -32,7 +32,7 @@
  * ranges).
  *
  * There are some hardware limitations:
- * a) You cann't use mixture of unipolar/bipoar ranges or differencial/single
+ * a) You can't use mixture of unipolar/bipolar ranges or differential/single
  *  ended inputs.
  * b) DMA transfers must have the length aligned to two samples (32 bit),
  *  so there is some problems if cmd->chanlist_len is odd. This driver tries
@@ -227,7 +227,7 @@ struct pci9118_private {
 	struct pci9118_dmabuf dmabuf[2];
 	int softsshdelay;		/*
 					 * >0 use software S&H,
-					 * numer is requested delay in ns
+					 * number is requested delay in ns
 					 */
 	unsigned char softsshsample;	/*
 					 * polarity of S&H signal
-- 
2.47.2

Re: [PATCH v2] comedi: drivers: adl_pci9118.c: Edit file so that checkpatch.pl has 0 typo errors

[Ian Abbott]

On 06/05/2025 17:07, Heikki Huttu wrote:
> Fix errors produced by checkpath.pl about typos.
> 
> Signed-off-by: Heikki Huttu <heissendo88@gmail.com>
> ---
> 
> V2: Removed all modifications done to parenthesis. Edit Patch name and
> only typo fixes remain.
> 
>   drivers/comedi/drivers/adl_pci9118.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/comedi/drivers/adl_pci9118.c b/drivers/comedi/drivers/adl_pci9118.c
> index a76e2666d583..67c663892e48 100644
> --- a/drivers/comedi/drivers/adl_pci9118.c
> +++ b/drivers/comedi/drivers/adl_pci9118.c
> @@ -32,7 +32,7 @@
>    * ranges).
>    *
>    * There are some hardware limitations:
> - * a) You cann't use mixture of unipolar/bipoar ranges or differencial/single
> + * a) You can't use mixture of unipolar/bipolar ranges or differential/single
>    *  ended inputs.
>    * b) DMA transfers must have the length aligned to two samples (32 bit),
>    *  so there is some problems if cmd->chanlist_len is odd. This driver tries
> @@ -227,7 +227,7 @@ struct pci9118_private {
>   	struct pci9118_dmabuf dmabuf[2];
>   	int softsshdelay;		/*
>   					 * >0 use software S&H,
> -					 * numer is requested delay in ns
> +					 * number is requested delay in ns
>   					 */
>   	unsigned char softsshsample;	/*
>   					 * polarity of S&H signal

The patch looks fine, thanks.

Reviewed-by: Ian Abbott <abbotti@mev.co.uk>

I don't have commit access to any pulled trees, so could you please 
resend with Greg Kroah-Hartman <gregkh@linuxfoundation.org> in the Cc 
list?  Feel free to add my Reviewed-by: line above when resending.  You 
can leave the patch at version v2 since the patch and description hasn't 
changed.

-- 
-=( Ian Abbott <abbotti@mev.co.uk> || MEV Ltd. is a company  )=-
-=( registered in England & Wales.  Regd. number: 02862268.  )=-
-=( Regd. addr.: S11 & 12 Building 67, Europa Business Park, )=-
-=( Bird Hall Lane, STOCKPORT, SK3 0XA, UK. || www.mev.co.uk )=-

Re: [PATCH v2] comedi: drivers: adl_pci9118.c: Edit file so that checkpatch.pl has 0 typo errors

[Heikki Huttu]

Wed, May 07, 2025 at 10:04:05AM +0100, Ian Abbott kirjoitti:
> On 06/05/2025 17:07, Heikki Huttu wrote:
> > Fix errors produced by checkpath.pl about typos.
> > 
> > Signed-off-by: Heikki Huttu <heissendo88@gmail.com>
> > ---
> > 
> > V2: Removed all modifications done to parenthesis. Edit Patch name and
> > only typo fixes remain.
> > 
> >   drivers/comedi/drivers/adl_pci9118.c | 4 ++--
> >   1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/comedi/drivers/adl_pci9118.c b/drivers/comedi/drivers/adl_pci9118.c
> > index a76e2666d583..67c663892e48 100644
> > --- a/drivers/comedi/drivers/adl_pci9118.c
> > +++ b/drivers/comedi/drivers/adl_pci9118.c
> > @@ -32,7 +32,7 @@
> >    * ranges).
> >    *
> >    * There are some hardware limitations:
> > - * a) You cann't use mixture of unipolar/bipoar ranges or differencial/single
> > + * a) You can't use mixture of unipolar/bipolar ranges or differential/single
> >    *  ended inputs.
> >    * b) DMA transfers must have the length aligned to two samples (32 bit),
> >    *  so there is some problems if cmd->chanlist_len is odd. This driver tries
> > @@ -227,7 +227,7 @@ struct pci9118_private {
> >   	struct pci9118_dmabuf dmabuf[2];
> >   	int softsshdelay;		/*
> >   					 * >0 use software S&H,
> > -					 * numer is requested delay in ns
> > +					 * number is requested delay in ns
> >   					 */
> >   	unsigned char softsshsample;	/*
> >   					 * polarity of S&H signal
> 
> The patch looks fine, thanks.
> 
> Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
> 
> I don't have commit access to any pulled trees, so could you please resend
> with Greg Kroah-Hartman <gregkh@linuxfoundation.org> in the Cc list?  Feel
> free to add my Reviewed-by: line above when resending.  You can leave the
> patch at version v2 since the patch and description hasn't changed.
> 
> -- 
> -=( Ian Abbott <abbotti@mev.co.uk> || MEV Ltd. is a company  )=-
> -=( registered in England & Wales.  Regd. number: 02862268.  )=-
> -=( Regd. addr.: S11 & 12 Building 67, Europa Business Park, )=-
> -=( Bird Hall Lane, STOCKPORT, SK3 0XA, UK. || www.mev.co.uk )=-

Thank you Ian! When you have the time, could you please take a look at
this patch Greg? Thank you!

Fix errors produced by checkpath.pl about typos.

Signed-off-by: Heikki Huttu <heissendo88@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
---

V2: Removed all modifications done to parenthesis. Edit Patch name and
only typo fixes remain.

  drivers/comedi/drivers/adl_pci9118.c | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/comedi/drivers/adl_pci9118.c b/drivers/comedi/drivers/adl_pci9118.c
index a76e2666d583..67c663892e48 100644
--- a/drivers/comedi/drivers/adl_pci9118.c
+++ b/drivers/comedi/drivers/adl_pci9118.c
@@ -32,7 +32,7 @@
   * ranges).
   *
   * There are some hardware limitations:
- * a) You cann't use mixture of unipolar/bipoar ranges or differencial/single
+ * a) You can't use mixture of unipolar/bipolar ranges or differential/single
   *  ended inputs.
   * b) DMA transfers must have the length aligned to two samples (32 bit),
   *  so there is some problems if cmd->chanlist_len is odd. This driver tries
@@ -227,7 +227,7 @@ struct pci9118_private {
  	struct pci9118_dmabuf dmabuf[2];
  	int softsshdelay;		/*
  					 * >0 use software S&H,
-					 * numer is requested delay in ns
+					 * number is requested delay in ns
  					 */
  	unsigned char softsshsample;	/*
  					 * polarity of S&H signal

Re: [PATCH v2] comedi: drivers: adl_pci9118.c: Edit file so that checkpatch.pl has 0 typo errors

[Greg KH]

On Thu, May 08, 2025 at 06:32:04PM +0300, Heikki Huttu wrote:
> Wed, May 07, 2025 at 10:04:05AM +0100, Ian Abbott kirjoitti:
> > On 06/05/2025 17:07, Heikki Huttu wrote:
> > > Fix errors produced by checkpath.pl about typos.
> > > 
> > > Signed-off-by: Heikki Huttu <heissendo88@gmail.com>
> > > ---
> > > 
> > > V2: Removed all modifications done to parenthesis. Edit Patch name and
> > > only typo fixes remain.
> > > 
> > >   drivers/comedi/drivers/adl_pci9118.c | 4 ++--
> > >   1 file changed, 2 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/comedi/drivers/adl_pci9118.c b/drivers/comedi/drivers/adl_pci9118.c
> > > index a76e2666d583..67c663892e48 100644
> > > --- a/drivers/comedi/drivers/adl_pci9118.c
> > > +++ b/drivers/comedi/drivers/adl_pci9118.c
> > > @@ -32,7 +32,7 @@
> > >    * ranges).
> > >    *
> > >    * There are some hardware limitations:
> > > - * a) You cann't use mixture of unipolar/bipoar ranges or differencial/single
> > > + * a) You can't use mixture of unipolar/bipolar ranges or differential/single
> > >    *  ended inputs.
> > >    * b) DMA transfers must have the length aligned to two samples (32 bit),
> > >    *  so there is some problems if cmd->chanlist_len is odd. This driver tries
> > > @@ -227,7 +227,7 @@ struct pci9118_private {
> > >   	struct pci9118_dmabuf dmabuf[2];
> > >   	int softsshdelay;		/*
> > >   					 * >0 use software S&H,
> > > -					 * numer is requested delay in ns
> > > +					 * number is requested delay in ns
> > >   					 */
> > >   	unsigned char softsshsample;	/*
> > >   					 * polarity of S&H signal
> > 
> > The patch looks fine, thanks.
> > 
> > Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
> > 
> > I don't have commit access to any pulled trees, so could you please resend
> > with Greg Kroah-Hartman <gregkh@linuxfoundation.org> in the Cc list?  Feel
> > free to add my Reviewed-by: line above when resending.  You can leave the
> > patch at version v2 since the patch and description hasn't changed.
> > 
> > -- 
> > -=( Ian Abbott <abbotti@mev.co.uk> || MEV Ltd. is a company  )=-
> > -=( registered in England & Wales.  Regd. number: 02862268.  )=-
> > -=( Regd. addr.: S11 & 12 Building 67, Europa Business Park, )=-
> > -=( Bird Hall Lane, STOCKPORT, SK3 0XA, UK. || www.mev.co.uk )=-
> 
> Thank you Ian! When you have the time, could you please take a look at
> this patch Greg? Thank you!
> 
> Fix errors produced by checkpath.pl about typos.
> 
> Signed-off-by: Heikki Huttu <heissendo88@gmail.com>
> Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
> ---
> 
> V2: Removed all modifications done to parenthesis. Edit Patch name and
> only typo fixes remain.
> 
>   drivers/comedi/drivers/adl_pci9118.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/comedi/drivers/adl_pci9118.c b/drivers/comedi/drivers/adl_pci9118.c
> index a76e2666d583..67c663892e48 100644
> --- a/drivers/comedi/drivers/adl_pci9118.c
> +++ b/drivers/comedi/drivers/adl_pci9118.c
> @@ -32,7 +32,7 @@
>    * ranges).
>    *
>    * There are some hardware limitations:
> - * a) You cann't use mixture of unipolar/bipoar ranges or differencial/single
> + * a) You can't use mixture of unipolar/bipolar ranges or differential/single
>    *  ended inputs.
>    * b) DMA transfers must have the length aligned to two samples (32 bit),
>    *  so there is some problems if cmd->chanlist_len is odd. This driver tries
> @@ -227,7 +227,7 @@ struct pci9118_private {
>   	struct pci9118_dmabuf dmabuf[2];
>   	int softsshdelay;		/*
>   					 * >0 use software S&H,
> -					 * numer is requested delay in ns
> +					 * number is requested delay in ns
>   					 */
>   	unsigned char softsshsample;	/*
>   					 * polarity of S&H signal

This needs to be submitted in a format I can apply it in :)

thanks,

greg k-h

[PATCH v2] comedi: drivers: adl_pci9118.c: Edit file so that checkpatch.pl has 0 typo errors

[Heikki Huttu]

Fix errors produced by checkpath.pl about typos.

Signed-off-by: Heikki Huttu <heissendo88@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
---
 drivers/comedi/drivers/adl_pci9118.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/comedi/drivers/adl_pci9118.c b/drivers/comedi/drivers/adl_pci9118.c
index a76e2666d583..67c663892e48 100644
--- a/drivers/comedi/drivers/adl_pci9118.c
+++ b/drivers/comedi/drivers/adl_pci9118.c
@@ -32,7 +32,7 @@
  * ranges).
  *
  * There are some hardware limitations:
- * a) You cann't use mixture of unipolar/bipoar ranges or differencial/single
+ * a) You can't use mixture of unipolar/bipolar ranges or differential/single
  *  ended inputs.
  * b) DMA transfers must have the length aligned to two samples (32 bit),
  *  so there is some problems if cmd->chanlist_len is odd. This driver tries
@@ -227,7 +227,7 @@ struct pci9118_private {
 	struct pci9118_dmabuf dmabuf[2];
 	int softsshdelay;		/*
 					 * >0 use software S&H,
-					 * numer is requested delay in ns
+					 * number is requested delay in ns
 					 */
 	unsigned char softsshsample;	/*
 					 * polarity of S&H signal
-- 
2.47.2