From: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: kernel@collabora.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-kernel@vger.kernel.org,
Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Subject: [PATCH 3/3] arm64: dts: rockchip: add ROCK 5T device tree
Date: Fri, 09 May 2025 14:31:43 +0200 [thread overview]
Message-ID: <20250509-add-rock5t-v1-3-cff1de74eced@collabora.com> (raw)
In-Reply-To: <20250509-add-rock5t-v1-0-cff1de74eced@collabora.com>
The RADXA ROCK 5T is a single board computer quite similar to the ROCK
5B+, except it has one more PCIe-to-Ethernet controller (at the expense
of a USB3 port) and a barrel jack for power input instead. Some pins are
shuffled around as well.
Add a device tree for it.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts | 105 ++++++++++++++++++++++++
2 files changed, 106 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 7a05bd885d5ecb96c3decbd3f483a6c58b81e0ab..eee0b27ca9f6a330baae8b50ca6aaed5de56227f 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -166,6 +166,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5t.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-video-demo.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts
new file mode 100644
index 0000000000000000000000000000000000000000..258c7400301d7f77517197ab433946bbfa39cf63
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588-rock-5b-5bp-5t.dtsi"
+
+/ {
+ model = "Radxa ROCK 5T";
+ compatible = "radxa,rock-5t", "rockchip,rk3588";
+
+ analog-sound {
+ compatible = "audio-graph-card";
+ label = "rk3588-es8316";
+
+ widgets = "Microphone", "Mic Jack",
+ "Headphone", "Headphones";
+
+ routing = "MIC2", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR";
+
+ dais = <&i2s0_8ch_p0>;
+ hp-det-gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_rgb_b>;
+
+ led_rgb_b {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ rfkill {
+ compatible = "rfkill-gpio";
+ label = "rfkill-m2-wlan";
+ radio-type = "wlan";
+ shutdown-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
+ };
+
+ vcc3v3_pcie2x1l1: regulator-vcc3v3-pcie2x1l2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_pcie2x1l1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+};
+
+&hdmi_receiver {
+ hpd-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pcie2x1l1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_1_rst>;
+ reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie2x1l1>;
+ status = "okay";
+};
+
+&pinctrl {
+ hdmirx {
+ hdmirx_hpd: hdmirx-5v-detection {
+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ led_rgb_b: led-rgb-b {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie2 {
+ pcie2_1_rst: pcie2-1-rst {
+ rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
+ rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sound {
+ hp_detect: hp-detect {
+ rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&vcc3v3_pcie2x1l0 {
+ gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_0_vcc3v3_en>;
+ status = "okay";
+};
--
2.49.0
next prev parent reply other threads:[~2025-05-09 12:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-09 12:31 [PATCH 0/3] Add RADXA ROCK 5T support Nicolas Frattaroli
2025-05-09 12:31 ` [PATCH 1/3] dt-bindings: arm: rockchip: add RADXA ROCK 5T Nicolas Frattaroli
2025-05-12 16:54 ` Krzysztof Kozlowski
2025-05-09 12:31 ` [PATCH 2/3] arm64: dts: rockchip: reorganise common rock5* nodes Nicolas Frattaroli
2025-05-09 13:13 ` Sebastian Reichel
2025-05-09 12:31 ` Nicolas Frattaroli [this message]
2025-05-09 14:17 ` [PATCH 0/3] Add RADXA ROCK 5T support Rob Herring (Arm)
2025-05-09 15:25 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250509-add-rock5t-v1-3-cff1de74eced@collabora.com \
--to=nicolas.frattaroli@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=kernel@collabora.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®