mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Jessica Zhang <quic_jesszhan@quicinc.com>,
	 David Airlie <airlied@gmail.com>,
	Simona Vetter <simona@ffwll.ch>,
	 Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	 Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	 Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org,
	Casey Connolly <casey.connolly@linaro.org>,
	 Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v2 2/6] drm/panel: visionox-rm69299: add plumbing to support panel variants
Date: Fri, 09 May 2025 10:59:40 +0200	[thread overview]
Message-ID: <20250509-topic-misc-shift6-panel-v2-2-c2c2d52abd51@linaro.org> (raw)
In-Reply-To: <20250509-topic-misc-shift6-panel-v2-0-c2c2d52abd51@linaro.org>

In order to support a panel variant, add plumbing code to pass
init sequence and mode as compatible data.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/gpu/drm/panel/panel-visionox-rm69299.c | 58 ++++++++++++++------------
 1 file changed, 32 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-visionox-rm69299.c b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
index be3a9797fbced5222b313cf83f8078b919e2c219..156bca0197481b470fa85b2eab7c979b76e489b6 100644
--- a/drivers/gpu/drm/panel/panel-visionox-rm69299.c
+++ b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
@@ -5,6 +5,7 @@
 
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/property.h>
 #include <linux/mod_devicetable.h>
 #include <linux/gpio/consumer.h>
 #include <linux/regulator/consumer.h>
@@ -15,11 +16,22 @@
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
 
+struct visionox_rm69299_panel_desc {
+	const struct drm_display_mode *mode;
+	const u8 *init_seq;
+	unsigned int init_seq_len;
+};
+
 struct visionox_rm69299 {
 	struct drm_panel panel;
 	struct regulator_bulk_data supplies[2];
 	struct gpio_desc *reset_gpio;
 	struct mipi_dsi_device *dsi;
+	const struct visionox_rm69299_panel_desc *desc;
+};
+
+static const u8 visionox_rm69299_1080x2248_60hz_init_seq[][2] = {
+	{ 0xfe, 0x00 }, { 0xc2, 0x08 }, { 0x35, 0x00 }, { 0x51, 0xff },
 };
 
 static inline struct visionox_rm69299 *panel_to_ctx(struct drm_panel *panel)
@@ -84,7 +96,7 @@ static int visionox_rm69299_unprepare(struct drm_panel *panel)
 static int visionox_rm69299_prepare(struct drm_panel *panel)
 {
 	struct visionox_rm69299 *ctx = panel_to_ctx(panel);
-	int ret;
+	int ret, i;
 
 	ret = visionox_rm69299_power_on(ctx);
 	if (ret < 0)
@@ -92,28 +104,12 @@ static int visionox_rm69299_prepare(struct drm_panel *panel)
 
 	ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
 
-	ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xfe, 0x00 }, 2);
-	if (ret < 0) {
-		dev_err(ctx->panel.dev, "cmd set tx 0 failed, ret = %d\n", ret);
-		goto power_off;
-	}
-
-	ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xc2, 0x08 }, 2);
-	if (ret < 0) {
-		dev_err(ctx->panel.dev, "cmd set tx 1 failed, ret = %d\n", ret);
-		goto power_off;
-	}
-
-	ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x35, 0x00 }, 2);
-	if (ret < 0) {
-		dev_err(ctx->panel.dev, "cmd set tx 2 failed, ret = %d\n", ret);
-		goto power_off;
-	}
-
-	ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x51, 0xff }, 2);
-	if (ret < 0) {
-		dev_err(ctx->panel.dev, "cmd set tx 3 failed, ret = %d\n", ret);
-		goto power_off;
+	for (i = 0; i < ctx->desc->init_seq_len; i++) {
+		ret = mipi_dsi_dcs_write_buffer(ctx->dsi, &ctx->desc->init_seq[i * 2], 2);
+		if (ret < 0) {
+			dev_err(ctx->panel.dev,	"cmd tx failed, ret = %d\n", ret);
+			return ret;
+		}
 	}
 
 	ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
@@ -160,8 +156,7 @@ static int visionox_rm69299_get_modes(struct drm_panel *panel,
 	struct visionox_rm69299 *ctx = panel_to_ctx(panel);
 	struct drm_display_mode *mode;
 
-	mode = drm_mode_duplicate(connector->dev,
-				  &visionox_rm69299_1080x2248_60hz);
+	mode = drm_mode_duplicate(connector->dev, ctx->desc->mode);
 	if (!mode) {
 		dev_err(ctx->panel.dev, "failed to create a new display mode\n");
 		return 0;
@@ -191,6 +186,10 @@ static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
 	if (!ctx)
 		return -ENOMEM;
 
+	ctx->desc = device_get_match_data(dev);
+	if (!ctx->desc)
+		return -EINVAL;
+
 	mipi_dsi_set_drvdata(dsi, ctx);
 
 	ctx->dsi = dsi;
@@ -239,8 +238,15 @@ static void visionox_rm69299_remove(struct mipi_dsi_device *dsi)
 	drm_panel_remove(&ctx->panel);
 }
 
+const struct visionox_rm69299_panel_desc visionox_rm69299_1080p_display_desc = {
+	.mode = &visionox_rm69299_1080x2248_60hz,
+	.init_seq = (const u8 *)visionox_rm69299_1080x2248_60hz_init_seq,
+	.init_seq_len = ARRAY_SIZE(visionox_rm69299_1080x2248_60hz_init_seq),
+};
+
 static const struct of_device_id visionox_rm69299_of_match[] = {
-	{ .compatible = "visionox,rm69299-1080p-display", },
+	{ .compatible = "visionox,rm69299-1080p-display",
+	  .data = &visionox_rm69299_1080p_display_desc },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, visionox_rm69299_of_match);

-- 
2.34.1


  parent reply	other threads:[~2025-05-09  8:59 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-09  8:59 [PATCH v2 0/6] panel: visionox-rm69299: modernize & support the variant found in the SHIFT6mq Neil Armstrong
2025-05-09  8:59 ` [PATCH v2 1/6] dt-bindings: display: visionox-rm69299: document new compatible string Neil Armstrong
2025-05-09  8:59 ` Neil Armstrong [this message]
2025-05-09 22:45   ` [PATCH v2 2/6] drm/panel: visionox-rm69299: add plumbing to support panel variants Jessica Zhang
2025-05-09  8:59 ` [PATCH v2 3/6] drm/panel: visionox-rm69299: switch to _multi variants Neil Armstrong
2025-05-09 22:46   ` Jessica Zhang
2025-05-09  8:59 ` [PATCH v2 4/6] drm/panel: visionox-rm69299: switch to devm_regulator_bulk_get_const() Neil Armstrong
2025-05-09 22:48   ` Jessica Zhang
2025-05-09  8:59 ` [PATCH v2 5/6] drm/panel: visionox-rm69299: switch to devm_drm_panel_alloc() Neil Armstrong
2025-05-09 22:48   ` Jessica Zhang
2025-05-09  8:59 ` [PATCH v2 6/6] drm/panel: visionox-rm69299: support the variant found in the SHIFT6mq Neil Armstrong
2025-05-09 22:50   ` Jessica Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250509-topic-misc-shift6-panel-v2-2-c2c2d52abd51@linaro.org \
    --to=neil.armstrong@linaro.org \
    --cc=airlied@gmail.com \
    --cc=casey.connolly@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=quic_jesszhan@quicinc.com \
    --cc=robh@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®