Re: [PATCH v2 3/6] drm/panel: visionox-rm69299: switch to _multi variants

[Jessica Zhang <quic_jesszhan@quicinc.com>]

On 5/9/2025 1:59 AM, Neil Armstrong wrote:
> Switch to the DSI _multi variants to simplify error handling.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>

> ---
>   drivers/gpu/drm/panel/panel-visionox-rm69299.c | 48 +++++++-------------------
>   1 file changed, 13 insertions(+), 35 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-visionox-rm69299.c b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
> index 156bca0197481b470fa85b2eab7c979b76e489b6..c3c14150a5546512151fb15c8e9a91269ca21c65 100644
> --- a/drivers/gpu/drm/panel/panel-visionox-rm69299.c
> +++ b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
> @@ -72,30 +72,24 @@ static int visionox_rm69299_power_off(struct visionox_rm69299 *ctx)
>   static int visionox_rm69299_unprepare(struct drm_panel *panel)
>   {
>   	struct visionox_rm69299 *ctx = panel_to_ctx(panel);
> -	int ret;
> +	struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
>   
>   	ctx->dsi->mode_flags = 0;
>   
> -	ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0);
> -	if (ret < 0)
> -		dev_err(ctx->panel.dev, "set_display_off cmd failed ret = %d\n", ret);
> +	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
>   
>   	/* 120ms delay required here as per DCS spec */
> -	msleep(120);
> +	mipi_dsi_msleep(&dsi_ctx, 120);
>   
> -	ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0);
> -	if (ret < 0) {
> -		dev_err(ctx->panel.dev, "enter_sleep cmd failed ret = %d\n", ret);
> -	}
> +	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
>   
> -	ret = visionox_rm69299_power_off(ctx);
> -
> -	return ret;
> +	return visionox_rm69299_power_off(ctx);
>   }
>   
>   static int visionox_rm69299_prepare(struct drm_panel *panel)
>   {
>   	struct visionox_rm69299 *ctx = panel_to_ctx(panel);
> +	struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
>   	int ret, i;
>   
>   	ret = visionox_rm69299_power_on(ctx);
> @@ -104,36 +98,20 @@ static int visionox_rm69299_prepare(struct drm_panel *panel)
>   
>   	ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
>   
> -	for (i = 0; i < ctx->desc->init_seq_len; i++) {
> -		ret = mipi_dsi_dcs_write_buffer(ctx->dsi, &ctx->desc->init_seq[i * 2], 2);
> -		if (ret < 0) {
> -			dev_err(ctx->panel.dev,	"cmd tx failed, ret = %d\n", ret);
> -			return ret;
> -		}
> -	}
> +	for (i = 0; i < ctx->desc->init_seq_len; i++)
> +		mipi_dsi_dcs_write_buffer_multi(&dsi_ctx, &ctx->desc->init_seq[i * 2], 2);
>   
> -	ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
> -	if (ret < 0) {
> -		dev_err(ctx->panel.dev, "exit_sleep_mode cmd failed ret = %d\n", ret);
> -		goto power_off;
> -	}
> +	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
>   
>   	/* Per DSI spec wait 120ms after sending exit sleep DCS command */
> -	msleep(120);
> +	mipi_dsi_msleep(&dsi_ctx, 120);
>   
> -	ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0);
> -	if (ret < 0) {
> -		dev_err(ctx->panel.dev, "set_display_on cmd failed ret = %d\n", ret);
> -		goto power_off;
> -	}
> +	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
>   
>   	/* Per DSI spec wait 120ms after sending set_display_on DCS command */
> -	msleep(120);
> +	mipi_dsi_msleep(&dsi_ctx, 120);
>   
> -	return 0;
> -
> -power_off:
> -	return ret;
> +	return dsi_ctx.accum_err;
>   }
>   
>   static const struct drm_display_mode visionox_rm69299_1080x2248_60hz = {
>