mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Eric Naim <dnaim@cachyos.org>
Cc: Mario Limonciello <mario.limonciello@amd.com>,
	stable@vger.kernel.org, patches@lists.linux.dev,
	linux-kernel@vger.kernel.org, torvalds@linux-foundation.org,
	akpm@linux-foundation.org, linux@roeck-us.net, shuah@kernel.org,
	patches@kernelci.org, lkft-triage@lists.linaro.org,
	pavel@denx.de, jonathanh@nvidia.com, f.fainelli@gmail.com,
	sudipm.mukherjee@gmail.com, srw@sladewatkins.net, rwarsow@gmx.de,
	conor@kernel.org, hargar@microsoft.com, broonie@kernel.org,
	David.Wu3@amd.com, alexander.deucher@amd.com
Subject: Re: [PATCH 6.14 000/145] 6.14.8-rc1 review
Date: Wed, 21 May 2025 19:10:23 +0200	[thread overview]
Message-ID: <2025052105-easiest-sulfur-96e2@gregkh> (raw)
In-Reply-To: <b08348c1-701f-4936-9c82-5d6e91cc701b@cachyos.org>

On Thu, May 22, 2025 at 12:59:10AM +0800, Eric Naim wrote:
> On 5/22/25 00:25, Greg Kroah-Hartman wrote:
> > On Wed, May 21, 2025 at 10:13:45PM +0800, Eric Naim wrote:
> >> On 5/21/25 13:35, Greg Kroah-Hartman wrote:
> >>> On Tue, May 20, 2025 at 09:42:13PM -0500, Mario Limonciello wrote:
> >>>> On 5/20/2025 4:34 PM, Eric Naim wrote:
> >>>>> Hi Greg,
> >>>>>
> >>>>> On 5/20/25 21:49, Greg Kroah-Hartman wrote:
> >>>>>> This is the start of the stable review cycle for the 6.14.8 release.
> >>>>>> There are 145 patches in this series, all will be posted as a response
> >>>>>> to this one.  If anyone has any issues with these being applied, please
> >>>>>> let me know.
> >>>>>>
> >>>>>> Responses should be made by Thu, 22 May 2025 12:57:37 +0000.
> >>>>>> Anything received after that time might be too late.
> >>>>>>
> >>>>>> The whole patch series can be found in one patch at:
> >>>>>> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.14.8-rc1.gz
> >>>>>> or in the git tree and branch at:
> >>>>>> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.14.y
> >>>>>> and the diffstat can be found below.
> >>>>>>
> >>>>>> thanks,
> >>>>>>
> >>>>>> greg k-h
> >>>>>>
> >>>>>> -------------
> >>>>>> Pseudo-Shortlog of commits:
> >>>>>>
> >>>>>> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >>>>>>      Linux 6.14.8-rc1
> >>>>>>
> >>>>>> Dan Carpenter <dan.carpenter@linaro.org>
> >>>>>>      phy: tegra: xusb: remove a stray unlock
> >>>>>>
> >>>>>> Tiezhu Yang <yangtiezhu@loongson.cn>
> >>>>>>      perf tools: Fix build error for LoongArch
> >>>>>>
> >>>>>> Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
> >>>>>>      mm/page_alloc: fix race condition in unaccepted memory handling
> >>>>>>
> >>>>>> Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
> >>>>>>      drm/xe/gsc: do not flush the GSC worker from the reset path
> >>>>>>
> >>>>>> Maciej Falkowski <maciej.falkowski@linux.intel.com>
> >>>>>>      accel/ivpu: Flush pending jobs of device's workqueues
> >>>>>>
> >>>>>> Karol Wachowski <karol.wachowski@intel.com>
> >>>>>>      accel/ivpu: Fix missing MMU events if file_priv is unbound
> >>>>>>
> >>>>>> Karol Wachowski <karol.wachowski@intel.com>
> >>>>>>      accel/ivpu: Fix missing MMU events from reserved SSID
> >>>>>>
> >>>>>> Karol Wachowski <karol.wachowski@intel.com>
> >>>>>>      accel/ivpu: Move parts of MMU event IRQ handling to thread handler
> >>>>>>
> >>>>>> Karol Wachowski <karol.wachowski@intel.com>
> >>>>>>      accel/ivpu: Dump only first MMU fault from single context
> >>>>>>
> >>>>>> Maciej Falkowski <maciej.falkowski@linux.intel.com>
> >>>>>>      accel/ivpu: Use workqueue for IRQ handling
> >>>>>>
> >>>>>> Shuai Xue <xueshuai@linux.alibaba.com>
> >>>>>>      dmaengine: idxd: Refactor remove call with idxd_cleanup() helper
> >>>>>>
> >>>>>> Shuai Xue <xueshuai@linux.alibaba.com>
> >>>>>>      dmaengine: idxd: fix memory leak in error handling path of idxd_pci_probe
> >>>>>>
> >>>>>> Shuai Xue <xueshuai@linux.alibaba.com>
> >>>>>>      dmaengine: idxd: fix memory leak in error handling path of idxd_alloc
> >>>>>>
> >>>>>> Shuai Xue <xueshuai@linux.alibaba.com>
> >>>>>>      dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove call
> >>>>>>
> >>>>>> Shuai Xue <xueshuai@linux.alibaba.com>
> >>>>>>      dmaengine: idxd: Add missing cleanups in cleanup internals
> >>>>>>
> >>>>>> Shuai Xue <xueshuai@linux.alibaba.com>
> >>>>>>      dmaengine: idxd: Add missing cleanup for early error out in idxd_setup_internals
> >>>>>>
> >>>>>> Shuai Xue <xueshuai@linux.alibaba.com>
> >>>>>>      dmaengine: idxd: fix memory leak in error handling path of idxd_setup_groups
> >>>>>>
> >>>>>> Shuai Xue <xueshuai@linux.alibaba.com>
> >>>>>>      dmaengine: idxd: fix memory leak in error handling path of idxd_setup_engines
> >>>>>>
> >>>>>> Shuai Xue <xueshuai@linux.alibaba.com>
> >>>>>>      dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqs
> >>>>>>
> >>>>>> Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
> >>>>>>      dmaengine: ti: k3-udma: Use cap_mask directly from dma_device structure instead of a local copy
> >>>>>>
> >>>>>> Ronald Wahl <ronald.wahl@legrand.com>
> >>>>>>      dmaengine: ti: k3-udma: Add missing locking
> >>>>>>
> >>>>>> Barry Song <baohua@kernel.org>
> >>>>>>      mm: userfaultfd: correct dirty flags set for both present and swap pte
> >>>>>>
> >>>>>> Wupeng Ma <mawupeng1@huawei.com>
> >>>>>>      mm: hugetlb: fix incorrect fallback for subpool
> >>>>>>
> >>>>>> hexue <xue01.he@samsung.com>
> >>>>>>      io_uring/uring_cmd: fix hybrid polling initialization issue
> >>>>>>
> >>>>>> Jens Axboe <axboe@kernel.dk>
> >>>>>>      io_uring/memmap: don't use page_address() on a highmem page
> >>>>>>
> >>>>>> Nathan Chancellor <nathan@kernel.org>
> >>>>>>      net: qede: Initialize qede_ll_ops with designated initializer
> >>>>>>
> >>>>>> Steven Rostedt <rostedt@goodmis.org>
> >>>>>>      ring-buffer: Fix persistent buffer when commit page is the reader page
> >>>>>>
> >>>>>> Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
> >>>>>>      wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
> >>>>>>
> >>>>>> Fedor Pchelkin <pchelkin@ispras.ru>
> >>>>>>      wifi: mt76: disable napi on driver removal
> >>>>>>
> >>>>>> Jarkko Sakkinen <jarkko@kernel.org>
> >>>>>>      tpm: Mask TPM RC in tpm2_start_auth_session()
> >>>>>>
> >>>>>> Aaron Kling <webgeek1234@gmail.com>
> >>>>>>      spi: tegra114: Use value to check for invalid delays
> >>>>>>
> >>>>>> Jethro Donaldson <devel@jro.nz>
> >>>>>>      smb: client: fix memory leak during error handling for POSIX mkdir
> >>>>>>
> >>>>>> Steve Siwinski <ssiwinski@atto.com>
> >>>>>>      scsi: sd_zbc: block: Respect bio vector limits for REPORT ZONES buffer
> >>>>>>
> >>>>>> Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> >>>>>>      phy: renesas: rcar-gen3-usb2: Set timing registers only once
> >>>>>>
> >>>>>> Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> >>>>>>      phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind
> >>>>>>
> >>>>>> Oleksij Rempel <o.rempel@pengutronix.de>
> >>>>>>      net: phy: micrel: remove KSZ9477 EEE quirks now handled by phylink
> >>>>>>
> >>>>>> Oleksij Rempel <o.rempel@pengutronix.de>
> >>>>>>      net: dsa: microchip: let phylink manage PHY EEE configuration on KSZ switches
> >>>>>>
> >>>>>> Ma Ke <make24@iscas.ac.cn>
> >>>>>>      phy: Fix error handling in tegra_xusb_port_init
> >>>>>>
> >>>>>> Wayne Chang <waynec@nvidia.com>
> >>>>>>      phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking
> >>>>>>
> >>>>>> Steven Rostedt <rostedt@goodmis.org>
> >>>>>>      tracing: samples: Initialize trace_array_printk() with the correct function
> >>>>>>
> >>>>>> Ashish Kalra <ashish.kalra@amd.com>
> >>>>>>      x86/sev: Make sure pages are not skipped during kdump
> >>>>>>
> >>>>>> Ashish Kalra <ashish.kalra@amd.com>
> >>>>>>      x86/sev: Do not touch VMSA pages during SNP guest memory kdump
> >>>>>>
> >>>>>> pengdonglin <pengdonglin@xiaomi.com>
> >>>>>>      ftrace: Fix preemption accounting for stacktrace filter command
> >>>>>>
> >>>>>> pengdonglin <pengdonglin@xiaomi.com>
> >>>>>>      ftrace: Fix preemption accounting for stacktrace trigger command
> >>>>>>
> >>>>>> Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> >>>>>>      i2c: designware: Fix an error handling path in i2c_dw_pci_probe()
> >>>>>>
> >>>>>> Nathan Chancellor <nathan@kernel.org>
> >>>>>>      kbuild: Disable -Wdefault-const-init-unsafe
> >>>>>>
> >>>>>> Michael Kelley <mhklinux@outlook.com>
> >>>>>>      Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
> >>>>>>
> >>>>>> Michael Kelley <mhklinux@outlook.com>
> >>>>>>      Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
> >>>>>>
> >>>>>> Michael Kelley <mhklinux@outlook.com>
> >>>>>>      hv_netvsc: Remove rmsg_pgcnt
> >>>>>>
> >>>>>> Michael Kelley <mhklinux@outlook.com>
> >>>>>>      hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
> >>>>>>
> >>>>>> Michael Kelley <mhklinux@outlook.com>
> >>>>>>      hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
> >>>>>>
> >>>>>> Dragan Simic <dsimic@manjaro.org>
> >>>>>>      arm64: dts: rockchip: Remove overdrive-mode OPPs from RK3588J SoC dtsi
> >>>>>>
> >>>>>> Sam Edwards <cfsworks@gmail.com>
> >>>>>>      arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down
> >>>>>>
> >>>>>> Christian Hewitt <christianshewitt@gmail.com>
> >>>>>>      arm64: dts: amlogic: dreambox: fix missing clkc_audio node
> >>>>>>
> >>>>>> Hyejeong Choi <hjeong.choi@samsung.com>
> >>>>>>      dma-buf: insert memory barrier before updating num_fences
> >>>>>>
> >>>>>> Nicolas Chauvet <kwizart@gmail.com>
> >>>>>>      ALSA: usb-audio: Add sample rate quirk for Microdia JP001 USB Camera
> >>>>>>
> >>>>>> Christian Heusel <christian@heusel.eu>
> >>>>>>      ALSA: usb-audio: Add sample rate quirk for Audioengine D1
> >>>>>>
> >>>>>> Wentao Liang <vulab@iscas.ac.cn>
> >>>>>>      ALSA: es1968: Add error handling for snd_pcm_hw_constraint_pow2()
> >>>>>>
> >>>>>> Jeremy Linton <jeremy.linton@arm.com>
> >>>>>>      ACPI: PPTT: Fix processor subtable walk
> >>>>>>
> >>>>>> Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
> >>>>>>      gpio: pca953x: fix IRQ storm on system wake up
> >>>>>>
> >>>>>> Alexey Makhalov <alexey.makhalov@broadcom.com>
> >>>>>>      MAINTAINERS: Update Alexey Makhalov's email address
> >>>>>>
> >>>>>> Wayne Lin <Wayne.Lin@amd.com>
> >>>>>>      drm/amd/display: Avoid flooding unnecessary info messages
> >>>>>>
> >>>>>> Wayne Lin <Wayne.Lin@amd.com>
> >>>>>>      drm/amd/display: Correct the reply value when AUX write incomplete
> >>>>>>
> >>>>>> Philip Yang <Philip.Yang@amd.com>
> >>>>>>      drm/amdgpu: csa unmap use uninterruptible lock
> >>>>>>
> >>>>>> Tim Huang <tim.huang@amd.com>
> >>>>>>      drm/amdgpu: fix incorrect MALL size for GFX1151
> >>>>>>
> >>>>>> David (Ming Qiang) Wu <David.Wu3@amd.com>
> >>>>>>      drm/amdgpu: read back register after written for VCN v4.0.5
> >>>>>>
> >>>>>
> >>>>> This commit seems to breaking a couple of devices with the Phoenix APU, most notably the Ryzen AI chips. Note that this commit in mainline seems to work as intended, and after doing a little bit of digging, [1] landed in 6.15 and so this cherrypick may not be so trivial after all. Attached is a kernel trace highlighting the breakage caused by this commit, along with [2] for the full log.
> >>>>>
> >>>>> Also adding Alex, David and Mario to Ccs.
> >>>>>
> >>>>
> >>>> Just a minor correction - VCN 4.0.5 is on Strix.  So this report is not
> >>>> likely from a Phoenix APU.
> >>>>
> >>>> Nonetheless I agree; I suspect backporting
> >>>> ecc9ab4e924b7eb9e2c4a668162aaa1d9d60d08c will help the issue.
> >>>
> >>> If it is required, someone is going to need to provide a working
> >>> version, as that does not apply cleanly as-is.
> >>>
> >>> thanks,
> >>>
> >>> greg k-h
> >>
> >> Hi Greg,
> >>
> >> I finally got someone to test the mentioned commit, and I (or they) can confirm that ecc9ab4e924b7eb9e2c4a668162aaa1d9d60d08c is indeed the missing commit needed for "drm/amdgpu: read back register after written for VCN v4.0.5".
> >>
> >> I don't know if this will help, but I got everything to apply cleanly by first applying ecc9ab4e924b7eb9e2c4a668162aaa1d9d60d08c, then cherry-picking the mainline version of "drm/amdgpu: read back register after written for VCN v4.0.5" [1] since the one in stable-rc seems to have been adjusted for the stable tree and made it conflict.
> > 
> > I don't see the conflict that happened here, as I only apply patches
> > "cleanly".  But I trust you that things are odd here.
> > 
> >> -- 
> >> Regards,
> >>   Eric
> >>
> >> [1] ee7360fc27d6045510f8fe459b5649b2af27811a
> > 
> > Ick.  Ok, let me go drop this commit from the tree now, and then can you
> > resubmit both of these as a tested series for them to be included
> > properly?
> > 
> > I'll do the same for both 6.12.y and 6.14.y now.
> > 
> > thanks,
> > 
> > greg k-h
> 
> Hi,
> 
> I've sent it over at [1]. I hope I did it correctly as this is the first time I'm formally sending over a patch (even if it's not mine). Please let me know if I did anything wrong and things that I can do to correct them :). I've also opted to add a `Tested-by` tag in response to "a tested series". Reminder that I only built the kernels, and had another user test that build since I don't have an affected device, so feel free to drop it if its wrong.

Looks good, I'll queue them up after this round of releases goes out,
thanks!

greg k-h

  reply	other threads:[~2025-05-21 17:10 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-20 13:49 Greg Kroah-Hartman
2025-05-20 14:57 ` Ronald Warsow
2025-05-20 16:46   ` Luna Jernberg
2025-05-20 18:57 ` Florian Fainelli
2025-05-20 19:26 ` Miguel Ojeda
2025-05-20 21:12 ` Shuah Khan
2025-05-20 21:34 ` Eric Naim
2025-05-21  2:42   ` Mario Limonciello
2025-05-21  5:35     ` Greg Kroah-Hartman
2025-05-21 14:13       ` Eric Naim
2025-05-21 16:25         ` Greg Kroah-Hartman
2025-05-21 16:59           ` Eric Naim
2025-05-21 17:10             ` Greg Kroah-Hartman [this message]
2025-05-21  1:25 ` Ron Economos
2025-05-21  8:06 ` Takeshi Ogasawara
2025-05-21  8:31 ` Jon Hunter
2025-05-21  9:24 ` Naresh Kamboju
2025-05-21 16:25 ` Markus Reichelt
2025-05-21 18:00 ` Peter Schneider
2025-05-21 18:16 ` Mark Brown
2025-05-22  5:00 ` Hardik Garg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2025052105-easiest-sulfur-96e2@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=David.Wu3@amd.com \
    --cc=akpm@linux-foundation.org \
    --cc=alexander.deucher@amd.com \
    --cc=broonie@kernel.org \
    --cc=conor@kernel.org \
    --cc=dnaim@cachyos.org \
    --cc=f.fainelli@gmail.com \
    --cc=hargar@microsoft.com \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=lkft-triage@lists.linaro.org \
    --cc=mario.limonciello@amd.com \
    --cc=patches@kernelci.org \
    --cc=patches@lists.linux.dev \
    --cc=pavel@denx.de \
    --cc=rwarsow@gmx.de \
    --cc=shuah@kernel.org \
    --cc=srw@sladewatkins.net \
    --cc=stable@vger.kernel.org \
    --cc=sudipm.mukherjee@gmail.com \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®