From: Eric Naim <dnaim@cachyos.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org, patches@lists.linux.dev,
linux-kernel@vger.kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, linux@roeck-us.net, shuah@kernel.org,
patches@kernelci.org, lkft-triage@lists.linaro.org,
pavel@denx.de, jonathanh@nvidia.com, f.fainelli@gmail.com,
sudipm.mukherjee@gmail.com, srw@sladewatkins.net, rwarsow@gmx.de,
conor@kernel.org, hargar@microsoft.com, broonie@kernel.org,
David.Wu3@amd.com, alexander.deucher@amd.com
Subject: Re: [PATCH 6.14 000/145] 6.14.8-rc1 review
Date: Wed, 21 May 2025 22:13:45 +0800 [thread overview]
Message-ID: <a5376c47-156d-4841-85ab-615f2c942960@cachyos.org> (raw)
In-Reply-To: <2025052153-bleach-ouch-0e59@gregkh>
On 5/21/25 13:35, Greg Kroah-Hartman wrote:
> On Tue, May 20, 2025 at 09:42:13PM -0500, Mario Limonciello wrote:
>> On 5/20/2025 4:34 PM, Eric Naim wrote:
>>> Hi Greg,
>>>
>>> On 5/20/25 21:49, Greg Kroah-Hartman wrote:
>>>> This is the start of the stable review cycle for the 6.14.8 release.
>>>> There are 145 patches in this series, all will be posted as a response
>>>> to this one. If anyone has any issues with these being applied, please
>>>> let me know.
>>>>
>>>> Responses should be made by Thu, 22 May 2025 12:57:37 +0000.
>>>> Anything received after that time might be too late.
>>>>
>>>> The whole patch series can be found in one patch at:
>>>> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.14.8-rc1.gz
>>>> or in the git tree and branch at:
>>>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.14.y
>>>> and the diffstat can be found below.
>>>>
>>>> thanks,
>>>>
>>>> greg k-h
>>>>
>>>> -------------
>>>> Pseudo-Shortlog of commits:
>>>>
>>>> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>>> Linux 6.14.8-rc1
>>>>
>>>> Dan Carpenter <dan.carpenter@linaro.org>
>>>> phy: tegra: xusb: remove a stray unlock
>>>>
>>>> Tiezhu Yang <yangtiezhu@loongson.cn>
>>>> perf tools: Fix build error for LoongArch
>>>>
>>>> Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
>>>> mm/page_alloc: fix race condition in unaccepted memory handling
>>>>
>>>> Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
>>>> drm/xe/gsc: do not flush the GSC worker from the reset path
>>>>
>>>> Maciej Falkowski <maciej.falkowski@linux.intel.com>
>>>> accel/ivpu: Flush pending jobs of device's workqueues
>>>>
>>>> Karol Wachowski <karol.wachowski@intel.com>
>>>> accel/ivpu: Fix missing MMU events if file_priv is unbound
>>>>
>>>> Karol Wachowski <karol.wachowski@intel.com>
>>>> accel/ivpu: Fix missing MMU events from reserved SSID
>>>>
>>>> Karol Wachowski <karol.wachowski@intel.com>
>>>> accel/ivpu: Move parts of MMU event IRQ handling to thread handler
>>>>
>>>> Karol Wachowski <karol.wachowski@intel.com>
>>>> accel/ivpu: Dump only first MMU fault from single context
>>>>
>>>> Maciej Falkowski <maciej.falkowski@linux.intel.com>
>>>> accel/ivpu: Use workqueue for IRQ handling
>>>>
>>>> Shuai Xue <xueshuai@linux.alibaba.com>
>>>> dmaengine: idxd: Refactor remove call with idxd_cleanup() helper
>>>>
>>>> Shuai Xue <xueshuai@linux.alibaba.com>
>>>> dmaengine: idxd: fix memory leak in error handling path of idxd_pci_probe
>>>>
>>>> Shuai Xue <xueshuai@linux.alibaba.com>
>>>> dmaengine: idxd: fix memory leak in error handling path of idxd_alloc
>>>>
>>>> Shuai Xue <xueshuai@linux.alibaba.com>
>>>> dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove call
>>>>
>>>> Shuai Xue <xueshuai@linux.alibaba.com>
>>>> dmaengine: idxd: Add missing cleanups in cleanup internals
>>>>
>>>> Shuai Xue <xueshuai@linux.alibaba.com>
>>>> dmaengine: idxd: Add missing cleanup for early error out in idxd_setup_internals
>>>>
>>>> Shuai Xue <xueshuai@linux.alibaba.com>
>>>> dmaengine: idxd: fix memory leak in error handling path of idxd_setup_groups
>>>>
>>>> Shuai Xue <xueshuai@linux.alibaba.com>
>>>> dmaengine: idxd: fix memory leak in error handling path of idxd_setup_engines
>>>>
>>>> Shuai Xue <xueshuai@linux.alibaba.com>
>>>> dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqs
>>>>
>>>> Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
>>>> dmaengine: ti: k3-udma: Use cap_mask directly from dma_device structure instead of a local copy
>>>>
>>>> Ronald Wahl <ronald.wahl@legrand.com>
>>>> dmaengine: ti: k3-udma: Add missing locking
>>>>
>>>> Barry Song <baohua@kernel.org>
>>>> mm: userfaultfd: correct dirty flags set for both present and swap pte
>>>>
>>>> Wupeng Ma <mawupeng1@huawei.com>
>>>> mm: hugetlb: fix incorrect fallback for subpool
>>>>
>>>> hexue <xue01.he@samsung.com>
>>>> io_uring/uring_cmd: fix hybrid polling initialization issue
>>>>
>>>> Jens Axboe <axboe@kernel.dk>
>>>> io_uring/memmap: don't use page_address() on a highmem page
>>>>
>>>> Nathan Chancellor <nathan@kernel.org>
>>>> net: qede: Initialize qede_ll_ops with designated initializer
>>>>
>>>> Steven Rostedt <rostedt@goodmis.org>
>>>> ring-buffer: Fix persistent buffer when commit page is the reader page
>>>>
>>>> Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
>>>> wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
>>>>
>>>> Fedor Pchelkin <pchelkin@ispras.ru>
>>>> wifi: mt76: disable napi on driver removal
>>>>
>>>> Jarkko Sakkinen <jarkko@kernel.org>
>>>> tpm: Mask TPM RC in tpm2_start_auth_session()
>>>>
>>>> Aaron Kling <webgeek1234@gmail.com>
>>>> spi: tegra114: Use value to check for invalid delays
>>>>
>>>> Jethro Donaldson <devel@jro.nz>
>>>> smb: client: fix memory leak during error handling for POSIX mkdir
>>>>
>>>> Steve Siwinski <ssiwinski@atto.com>
>>>> scsi: sd_zbc: block: Respect bio vector limits for REPORT ZONES buffer
>>>>
>>>> Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>>> phy: renesas: rcar-gen3-usb2: Set timing registers only once
>>>>
>>>> Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>>> phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind
>>>>
>>>> Oleksij Rempel <o.rempel@pengutronix.de>
>>>> net: phy: micrel: remove KSZ9477 EEE quirks now handled by phylink
>>>>
>>>> Oleksij Rempel <o.rempel@pengutronix.de>
>>>> net: dsa: microchip: let phylink manage PHY EEE configuration on KSZ switches
>>>>
>>>> Ma Ke <make24@iscas.ac.cn>
>>>> phy: Fix error handling in tegra_xusb_port_init
>>>>
>>>> Wayne Chang <waynec@nvidia.com>
>>>> phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking
>>>>
>>>> Steven Rostedt <rostedt@goodmis.org>
>>>> tracing: samples: Initialize trace_array_printk() with the correct function
>>>>
>>>> Ashish Kalra <ashish.kalra@amd.com>
>>>> x86/sev: Make sure pages are not skipped during kdump
>>>>
>>>> Ashish Kalra <ashish.kalra@amd.com>
>>>> x86/sev: Do not touch VMSA pages during SNP guest memory kdump
>>>>
>>>> pengdonglin <pengdonglin@xiaomi.com>
>>>> ftrace: Fix preemption accounting for stacktrace filter command
>>>>
>>>> pengdonglin <pengdonglin@xiaomi.com>
>>>> ftrace: Fix preemption accounting for stacktrace trigger command
>>>>
>>>> Christophe JAILLET <christophe.jaillet@wanadoo.fr>
>>>> i2c: designware: Fix an error handling path in i2c_dw_pci_probe()
>>>>
>>>> Nathan Chancellor <nathan@kernel.org>
>>>> kbuild: Disable -Wdefault-const-init-unsafe
>>>>
>>>> Michael Kelley <mhklinux@outlook.com>
>>>> Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
>>>>
>>>> Michael Kelley <mhklinux@outlook.com>
>>>> Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
>>>>
>>>> Michael Kelley <mhklinux@outlook.com>
>>>> hv_netvsc: Remove rmsg_pgcnt
>>>>
>>>> Michael Kelley <mhklinux@outlook.com>
>>>> hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
>>>>
>>>> Michael Kelley <mhklinux@outlook.com>
>>>> hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
>>>>
>>>> Dragan Simic <dsimic@manjaro.org>
>>>> arm64: dts: rockchip: Remove overdrive-mode OPPs from RK3588J SoC dtsi
>>>>
>>>> Sam Edwards <cfsworks@gmail.com>
>>>> arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down
>>>>
>>>> Christian Hewitt <christianshewitt@gmail.com>
>>>> arm64: dts: amlogic: dreambox: fix missing clkc_audio node
>>>>
>>>> Hyejeong Choi <hjeong.choi@samsung.com>
>>>> dma-buf: insert memory barrier before updating num_fences
>>>>
>>>> Nicolas Chauvet <kwizart@gmail.com>
>>>> ALSA: usb-audio: Add sample rate quirk for Microdia JP001 USB Camera
>>>>
>>>> Christian Heusel <christian@heusel.eu>
>>>> ALSA: usb-audio: Add sample rate quirk for Audioengine D1
>>>>
>>>> Wentao Liang <vulab@iscas.ac.cn>
>>>> ALSA: es1968: Add error handling for snd_pcm_hw_constraint_pow2()
>>>>
>>>> Jeremy Linton <jeremy.linton@arm.com>
>>>> ACPI: PPTT: Fix processor subtable walk
>>>>
>>>> Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
>>>> gpio: pca953x: fix IRQ storm on system wake up
>>>>
>>>> Alexey Makhalov <alexey.makhalov@broadcom.com>
>>>> MAINTAINERS: Update Alexey Makhalov's email address
>>>>
>>>> Wayne Lin <Wayne.Lin@amd.com>
>>>> drm/amd/display: Avoid flooding unnecessary info messages
>>>>
>>>> Wayne Lin <Wayne.Lin@amd.com>
>>>> drm/amd/display: Correct the reply value when AUX write incomplete
>>>>
>>>> Philip Yang <Philip.Yang@amd.com>
>>>> drm/amdgpu: csa unmap use uninterruptible lock
>>>>
>>>> Tim Huang <tim.huang@amd.com>
>>>> drm/amdgpu: fix incorrect MALL size for GFX1151
>>>>
>>>> David (Ming Qiang) Wu <David.Wu3@amd.com>
>>>> drm/amdgpu: read back register after written for VCN v4.0.5
>>>>
>>>
>>> This commit seems to breaking a couple of devices with the Phoenix APU, most notably the Ryzen AI chips. Note that this commit in mainline seems to work as intended, and after doing a little bit of digging, [1] landed in 6.15 and so this cherrypick may not be so trivial after all. Attached is a kernel trace highlighting the breakage caused by this commit, along with [2] for the full log.
>>>
>>> Also adding Alex, David and Mario to Ccs.
>>>
>>
>> Just a minor correction - VCN 4.0.5 is on Strix. So this report is not
>> likely from a Phoenix APU.
>>
>> Nonetheless I agree; I suspect backporting
>> ecc9ab4e924b7eb9e2c4a668162aaa1d9d60d08c will help the issue.
>
> If it is required, someone is going to need to provide a working
> version, as that does not apply cleanly as-is.
>
> thanks,
>
> greg k-h
Hi Greg,
I finally got someone to test the mentioned commit, and I (or they) can confirm that ecc9ab4e924b7eb9e2c4a668162aaa1d9d60d08c is indeed the missing commit needed for "drm/amdgpu: read back register after written for VCN v4.0.5".
I don't know if this will help, but I got everything to apply cleanly by first applying ecc9ab4e924b7eb9e2c4a668162aaa1d9d60d08c, then cherry-picking the mainline version of "drm/amdgpu: read back register after written for VCN v4.0.5" [1] since the one in stable-rc seems to have been adjusted for the stable tree and made it conflict.
--
Regards,
Eric
[1] ee7360fc27d6045510f8fe459b5649b2af27811a
next prev parent reply other threads:[~2025-05-21 14:14 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-20 13:49 Greg Kroah-Hartman
2025-05-20 14:57 ` Ronald Warsow
2025-05-20 16:46 ` Luna Jernberg
2025-05-20 18:57 ` Florian Fainelli
2025-05-20 19:26 ` Miguel Ojeda
2025-05-20 21:12 ` Shuah Khan
2025-05-20 21:34 ` Eric Naim
2025-05-21 2:42 ` Mario Limonciello
2025-05-21 5:35 ` Greg Kroah-Hartman
2025-05-21 14:13 ` Eric Naim [this message]
2025-05-21 16:25 ` Greg Kroah-Hartman
2025-05-21 16:59 ` Eric Naim
2025-05-21 17:10 ` Greg Kroah-Hartman
2025-05-21 1:25 ` Ron Economos
2025-05-21 8:06 ` Takeshi Ogasawara
2025-05-21 8:31 ` Jon Hunter
2025-05-21 9:24 ` Naresh Kamboju
2025-05-21 16:25 ` Markus Reichelt
2025-05-21 18:00 ` Peter Schneider
2025-05-21 18:16 ` Mark Brown
2025-05-22 5:00 ` Hardik Garg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a5376c47-156d-4841-85ab-615f2c942960@cachyos.org \
--to=dnaim@cachyos.org \
--cc=David.Wu3@amd.com \
--cc=akpm@linux-foundation.org \
--cc=alexander.deucher@amd.com \
--cc=broonie@kernel.org \
--cc=conor@kernel.org \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hargar@microsoft.com \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lkft-triage@lists.linaro.org \
--cc=mario.limonciello@amd.com \
--cc=patches@kernelci.org \
--cc=patches@lists.linux.dev \
--cc=pavel@denx.de \
--cc=rwarsow@gmx.de \
--cc=shuah@kernel.org \
--cc=srw@sladewatkins.net \
--cc=stable@vger.kernel.org \
--cc=sudipm.mukherjee@gmail.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®