From: Frank Li <Frank.Li@nxp.com>
To: mirela.rabulea@nxp.com, mchehab@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com
Cc: imx@lists.linux.dev, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, ming.qian@nxp.com
Subject: [PATCH RESEND 2/2] arm64: dts: imx95: add jpeg encode and decode nodes
Date: Wed, 21 May 2025 13:34:04 -0400 [thread overview]
Message-ID: <20250521173444.310641-2-Frank.Li@nxp.com> (raw)
In-Reply-To: <20250521-95_jpeg-v1-0-392de5d29672@nxp.com>
Add jpeg encode\decode and related nodes for i.MX95.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
arch/arm64/boot/dts/freescale/imx95.dtsi | 44 ++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 632631a291122..d38bbe8b16d7e 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -3,6 +3,7 @@
* Copyright 2024 NXP
*/
+#include <dt-bindings/clock/nxp,imx95-clock.h>
#include <dt-bindings/dma/fsl-edma.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
@@ -1801,6 +1802,49 @@ pcie1_ep: pcie-ep@4c380000 {
status = "disabled";
};
+ vpu_blk_ctrl: clock-controller@4c410000 {
+ compatible = "nxp,imx95-vpu-csr", "syscon";
+ reg = <0x0 0x4c410000 0x0 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&scmi_clk IMX95_CLK_VPUAPB>;
+ power-domains = <&scmi_devpd IMX95_PD_VPU>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_VPUAPB>,
+ <&scmi_clk IMX95_CLK_VPU>,
+ <&scmi_clk IMX95_CLK_VPUJPEG>;
+ assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>,
+ <&scmi_clk IMX95_CLK_SYSPLL1_PFD2>,
+ <&scmi_clk IMX95_CLK_SYSPLL1_PFD0>;
+ assigned-clock-rates = <133333333>, <667000000>, <500000000>;
+ };
+
+ jpegdec: jpegdec@4c500000 {
+ compatible = "nxp,imx95-jpgdec", "nxp,imx8qxp-jpgdec";
+ reg = <0x0 0x4C500000 0x0 0x00050000>;
+ interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_VPU>,
+ <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>;
+ assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>;
+ assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>;
+ power-domains = <&scmi_devpd IMX95_PD_VPU>;
+ };
+
+ jpegenc: jpegenc@4c550000 {
+ compatible = "nxp,imx95-jpgenc", "nxp,imx8qxp-jpgenc";
+ reg = <0x0 0x4C550000 0x0 0x00050000>;
+ interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_VPU>,
+ <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>;
+ assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>;
+ assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>;
+ power-domains = <&scmi_devpd IMX95_PD_VPU>;
+ };
+
netcmix_blk_ctrl: syscon@4c810000 {
compatible = "nxp,imx95-netcmix-blk-ctrl", "syscon";
reg = <0x0 0x4c810000 0x0 0x8>;
--
2.34.1
next prev parent reply other threads:[~2025-05-21 17:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-21 17:34 [PATCH RESEND 0/2] media: nxp,imx8-jpeg: Add imx95 support Frank Li
2025-05-21 17:34 ` [PATCH RESEND 1/2] media: dt-bindings: nxp,imx8-jpeg: Add compatible strings for IMX95 JPEG Frank Li
2025-05-23 23:22 ` Nicolas Dufresne
2025-05-24 6:27 ` Krzysztof Kozlowski
2025-06-19 4:27 ` Shawn Guo
2025-06-19 17:16 ` Nicolas Dufresne
2025-06-20 5:54 ` Krzysztof Kozlowski
2025-06-20 15:06 ` Nicolas Dufresne
2025-06-22 10:28 ` Krzysztof Kozlowski
2025-05-21 17:34 ` Frank Li [this message]
2025-07-10 2:48 ` [PATCH RESEND 2/2] arm64: dts: imx95: add jpeg encode and decode nodes Frank Li
2025-07-11 5:37 ` Shawn Guo
2025-07-11 5:41 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250521173444.310641-2-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=ming.qian@nxp.com \
--cc=mirela.rabulea@nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®