[PATCH net v2 2/5] net: dsa: b53: do not enable RGMII delay on bcm63xx

[Jonas Gorski <jonas.gorski@gmail.com>]

bcm63xx's RGMII ports are always in MAC mode, never in PHY mode, so we
shouldn't enable any delays and let the PHY handle any delays as
necessary.

This fixes using RGMII ports with normal PHYs like BCM54612E, which will
handle the delay in the PHY.

Fixes: ce3bf94871f7 ("net: dsa: b53: add support for BCM63xx RGMIIs")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
v1 -> v2:
* do not enable delays at all

 drivers/net/dsa/b53/b53_common.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 8a6a370c8580..c186ee3fb28d 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1330,24 +1330,7 @@ static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port,
 		off = B53_RGMII_CTRL_P(port);
 
 	b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
-
-	switch (interface) {
-	case PHY_INTERFACE_MODE_RGMII_ID:
-		rgmii_ctrl |= (RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
-		break;
-	case PHY_INTERFACE_MODE_RGMII_RXID:
-		rgmii_ctrl &= ~(RGMII_CTRL_DLL_TXC);
-		rgmii_ctrl |= RGMII_CTRL_DLL_RXC;
-		break;
-	case PHY_INTERFACE_MODE_RGMII_TXID:
-		rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC);
-		rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
-		break;
-	case PHY_INTERFACE_MODE_RGMII:
-	default:
-		rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
-		break;
-	}
+	rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
 
 	if (port != dev->imp_port) {
 		if (is63268(dev))
-- 
2.43.0