From: Mark Bloch <mbloch@nvidia.com>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>,
"Andrew Lunn" <andrew+netdev@lunn.ch>,
Simon Horman <horms@kernel.org>
Cc: <saeedm@nvidia.com>, <gal@nvidia.com>, <leonro@nvidia.com>,
<tariqt@nvidia.com>, Leon Romanovsky <leon@kernel.org>,
<netdev@vger.kernel.org>, <linux-rdma@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Jianbo Liu <jianbol@nvidia.com>,
Alex Lazar <alazar@nvidia.com>, Mark Bloch <mbloch@nvidia.com>
Subject: [PATCH net 8/9] net/mlx5e: Fix leak of Geneve TLV option object
Date: Tue, 10 Jun 2025 18:15:13 +0300 [thread overview]
Message-ID: <20250610151514.1094735-9-mbloch@nvidia.com> (raw)
In-Reply-To: <20250610151514.1094735-1-mbloch@nvidia.com>
From: Jianbo Liu <jianbol@nvidia.com>
Previously, a unique tunnel id was added for the matching on TC
non-zero chains, to support inner header rewrite with goto action.
Later, it was used to support VF tunnel offload for vxlan, then for
Geneve and GRE. To support VF tunnel, a temporary mlx5_flow_spec is
used to parse tunnel options. For Geneve, if there is TLV option, a
object is created, or refcnt is added if already exists. But the
temporary mlx5_flow_spec is directly freed after parsing, which causes
the leak because no information regarding the object is saved in
flow's mlx5_flow_spec, which is used to free the object when deleting
the flow.
To fix the leak, call mlx5_geneve_tlv_option_del() before free the
temporary spec if it has TLV object.
Fixes: 521933cdc4aa ("net/mlx5e: Support Geneve and GRE with VF tunnel offload")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index f1d908f61134..fef418e1ed1a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -2028,9 +2028,8 @@ mlx5e_tc_add_fdb_flow(struct mlx5e_priv *priv,
return err;
}
-static bool mlx5_flow_has_geneve_opt(struct mlx5e_tc_flow *flow)
+static bool mlx5_flow_has_geneve_opt(struct mlx5_flow_spec *spec)
{
- struct mlx5_flow_spec *spec = &flow->attr->parse_attr->spec;
void *headers_v = MLX5_ADDR_OF(fte_match_param,
spec->match_value,
misc_parameters_3);
@@ -2069,7 +2068,7 @@ static void mlx5e_tc_del_fdb_flow(struct mlx5e_priv *priv,
}
complete_all(&flow->del_hw_done);
- if (mlx5_flow_has_geneve_opt(flow))
+ if (mlx5_flow_has_geneve_opt(&attr->parse_attr->spec))
mlx5_geneve_tlv_option_del(priv->mdev->geneve);
if (flow->decap_route)
@@ -2574,12 +2573,13 @@ static int parse_tunnel_attr(struct mlx5e_priv *priv,
err = mlx5e_tc_tun_parse(filter_dev, priv, tmp_spec, f, match_level);
if (err) {
- kvfree(tmp_spec);
NL_SET_ERR_MSG_MOD(extack, "Failed to parse tunnel attributes");
netdev_warn(priv->netdev, "Failed to parse tunnel attributes");
- return err;
+ } else {
+ err = mlx5e_tc_set_attr_rx_tun(flow, tmp_spec);
}
- err = mlx5e_tc_set_attr_rx_tun(flow, tmp_spec);
+ if (mlx5_flow_has_geneve_opt(tmp_spec))
+ mlx5_geneve_tlv_option_del(priv->mdev->geneve);
kvfree(tmp_spec);
if (err)
return err;
--
2.34.1
next prev parent reply other threads:[~2025-06-10 15:16 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-10 15:15 [PATCH net 0/9] mlx5 misc fixes 2025-06-10 Mark Bloch
2025-06-10 15:15 ` [PATCH net 1/9] net/mlx5: Ensure fw pages are always allocated on same NUMA Mark Bloch
2025-06-13 16:22 ` Zhu Yanjun
2025-06-15 5:55 ` Moshe Shemesh
2025-06-15 14:44 ` Zhu Yanjun
2025-06-19 16:31 ` Moshe Shemesh
2025-06-10 15:15 ` [PATCH net 2/9] net/mlx5: Fix ECVF vports unload on shutdown flow Mark Bloch
2025-06-10 15:15 ` [PATCH net 3/9] net/mlx5: Fix return value when searching for existing flow group Mark Bloch
2025-06-10 15:15 ` [PATCH net 4/9] net/mlx5: HWS, Init mutex on the correct path Mark Bloch
2025-06-10 15:15 ` [PATCH net 5/9] net/mlx5: HWS, fix missing ip_version handling in definer Mark Bloch
2025-06-10 15:15 ` [PATCH net 6/9] net/mlx5: HWS, make sure the uplink is the last destination Mark Bloch
2025-06-10 15:15 ` [PATCH net 7/9] net/mlx5e: Properly access RCU protected qdisc_sleeping variable Mark Bloch
2025-06-11 21:40 ` Jakub Kicinski
2025-06-12 7:31 ` Mark Bloch
2025-06-12 14:22 ` Jakub Kicinski
2025-06-12 14:47 ` Mark Bloch
2025-06-10 15:15 ` Mark Bloch [this message]
2025-06-10 15:15 ` [PATCH net 9/9] net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper Mark Bloch
2025-06-11 21:43 ` [PATCH net 0/9] mlx5 misc fixes 2025-06-10 Jakub Kicinski
2025-06-11 21:50 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250610151514.1094735-9-mbloch@nvidia.com \
--to=mbloch@nvidia.com \
--cc=alazar@nvidia.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gal@nvidia.com \
--cc=horms@kernel.org \
--cc=jianbol@nvidia.com \
--cc=kuba@kernel.org \
--cc=leon@kernel.org \
--cc=leonro@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=saeedm@nvidia.com \
--cc=tariqt@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®