[PATCH v4 0/5] iio: adc: ti-adc128s052: Add support for adc102s051

[Sukrut Bellary <sbellary@baylibre.com>]

The patch series adds the support for adc102s051 and family.

The family of devices are easier to support since they all
(no matter the resolution) seem to respond in 12-bits with the LSBs set to
0 for the reduced resolution devices.

Changes in v4:
	Patch 1:
	- No changes in dt-bindings.

	- Rebase on v6.16-rc1.
	- split changes in multiple patches.
	- Use shift and realbits.
	- Use separate structure for each device type.
	- cleanup - fix the order.
	- Add lower resolution devices support.
	- Add MAINTAINERS entry.

- Link to v3:
	https://lore.kernel.org/lkml/20250408132120.836461-1-sbellary@baylibre.com/

Changes in v3:
	Patch 1:
	- No changes in dt-bindings

	Patch 2:
	- used be16_to_cpu() for the endian conversion.
	- used config index enum while setting up the adc128_config[]

- Link to v2:
	https://lore.kernel.org/lkml/20231022031203.632153-1-sukrut.bellary@linux.com/

Changes in v2:
	Patch 1:
	- No changes in dt-bindings

	Patch 2:
	- Arranged of_device_id and spi_device_id in numeric order.
	- Used enum to index into adc128_config.
	- Reorder adc128_config in alphabetical.
	- Include channel resolution information.
	- Shift is calculated per resolution and used in scaling and
	raw data read.

- Link to v1:
	https://lore.kernel.org/all/20220701042919.18180-1-nm@ti.com/

Sukrut Bellary (5):
  dt-bindings: iio: adc: ti,adc128s052: Add adc08c and adc10c family
  iio: adc: ti-adc128s052: Use shift and realbits
  iio: adc: ti-adc128s052: cleanup changes
  iio: adc: ti-adc128s052: Add lower resolution devices support
  MAINTAINERS: maintainer for TI's ADCs' driver ti-adc128s052

 .../bindings/iio/adc/ti,adc128s052.yaml       |   6 +
 MAINTAINERS                                   |   1 +
 drivers/iio/adc/ti-adc128s052.c               | 184 ++++++++++++------
 3 files changed, 133 insertions(+), 58 deletions(-)

-- 
2.34.1