mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: John Madieu <john.madieu.xa@bp.renesas.com>
To: geert+renesas@glider.be, magnus.damm@gmail.com, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, mturquette@baylibre.com,
	sboyd@kernel.org, richardcochran@gmail.com
Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	netdev@vger.kernel.org, biju.das.jz@bp.renesas.com,
	John Madieu <john.madieu.xa@bp.renesas.com>
Subject: [PATCH v3 0/3] Add support for GBETH IPs found on RZ/G3E SoCs
Date: Mon, 23 Jun 2025 10:04:02 +0200	[thread overview]
Message-ID: <20250623080405.355083-1-john.madieu.xa@bp.renesas.com> (raw)

Hi all,

This series adds support for the two Gigabit Ethernet (GBETH) interfaces on the
Renesas RZ/G3E (R9A09G047) SoCs and their enablement on the SMARC-II EVK. This
is achieved by integrating the necessary clock/reset signals prior to defining
common DTS nodes, and enabling both GBETH ports at the board level.

Here are pach dependencies:

 - Patch 1/3 is based on renesas-drivers tree, on top of renesas-clk-for-v6.17
 branch
 - Patches [2,3]/3  are based on renesas-devel tree, on top of
 renesas-dts-for-v6.17 branch

V1 of this series is located here [1]. It originaly included a patch for
binding documentation, which, in response to Jakub [2], has been resubmited
as a standalone patch for net-next.

V2 can be found here [3].

Changes in v2:
 - Appart from resending the patches and some collected tags, there is no
 changes in V2.
 - Separated binding patch send as standalone patch can be found here [4]

Changes in v3:
 - Fixed consistency with clock names, replacing dashes with underscores
 - Labeled mdio nodes and used phandle-based override instead of node
 redefinition
 - Minor typo fixes

Note for DT maintainers:
Documentation/dt-bindings patch was sent separately and has already been applied here [5]

[1] - https://lore.kernel.org/all/20250604065200.163778-1-john.madieu.xa@bp.renesas.com/
[2] - https://lore.kernel.org/all/20250609083008.0157fe47@kernel.org/
[3] - https://lore.kernel.org/all/20250611061609.15527-1-john.madieu.xa@bp.renesas.com/
[4] - https://lore.kernel.org/all/20250611061204.15393-1-john.madieu.xa@bp.renesas.com/
[5] - https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=31b928210df1097eaa5e8cb51e2ff79989ebe57e

Regards,
John Madieu

John Madieu (3):
  clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs
  arm64: dts: renesas: r9a09g047: Add GBETH nodes
  arm64: dts: renesas: rzg3e-smarc-som: Enable eth{0-1} (GBETH)
    interfaces

 arch/arm64/boot/dts/renesas/r9a09g047.dtsi    | 207 ++++++++++++++++++
 .../boot/dts/renesas/rzg3e-smarc-som.dtsi     |  98 +++++++++
 drivers/clk/renesas/r9a09g047-cpg.c           |  64 ++++++
 3 files changed, 369 insertions(+)

-- 
2.25.1


             reply	other threads:[~2025-06-23  8:09 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-23  8:04 John Madieu [this message]
2025-06-23  8:04 ` [PATCH v3 1/3] clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs John Madieu
2025-06-25 15:12   ` Geert Uytterhoeven
2025-06-30 16:53     ` John Madieu
2025-06-23  8:04 ` [PATCH v3 2/3] arm64: dts: renesas: r9a09g047: Add GBETH nodes John Madieu
2025-06-26 12:31   ` Geert Uytterhoeven
2025-06-23  8:04 ` [PATCH v3 3/3] arm64: dts: renesas: rzg3e-smarc-som: Enable eth{0-1} (GBETH) interfaces John Madieu
2025-06-25 15:16   ` Geert Uytterhoeven
2025-06-26  7:51     ` Biju Das

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250623080405.355083-1-john.madieu.xa@bp.renesas.com \
    --to=john.madieu.xa@bp.renesas.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=krzk+dt@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=netdev@vger.kernel.org \
    --cc=richardcochran@gmail.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®