[PATCH v2 2/3] cxl/edac: Fix wrong dpa checking for PPR operation

[Li Ming <ming.li@zohomail.com>]

DPA 0 is considered invalid in cxl_do_ppr(), but per Table 8-143. "Get
Partition Info Output Payload" in CXL r3.2 section 8.2.10.9.2.1 "Get
Partition Info(Opcode 4100h)", it mentions that DPA 0 is a valid address
of a CXL device. So the correct implementation should be checking if the
DPA is in the DPA range of the CXL device rather than checking if the
DPA is equal to 0.

Fixes: be9b359e056a ("cxl/edac: Add CXL memory device soft PPR control feature")
Signed-off-by: Li Ming <ming.li@zohomail.com>
---
 drivers/cxl/core/edac.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/cxl/core/edac.c b/drivers/cxl/core/edac.c
index 623aaa4439c4..1cf65b1538b9 100644
--- a/drivers/cxl/core/edac.c
+++ b/drivers/cxl/core/edac.c
@@ -1923,8 +1923,11 @@ static int cxl_ppr_set_nibble_mask(struct device *dev, void *drv_data,
 static int cxl_do_ppr(struct device *dev, void *drv_data, u32 val)
 {
 	struct cxl_ppr_context *cxl_ppr_ctx = drv_data;
+	struct cxl_memdev *cxlmd = cxl_ppr_ctx->cxlmd;
+	struct cxl_dev_state *cxlds = cxlmd->cxlds;
 
-	if (!cxl_ppr_ctx->dpa || val != EDAC_DO_MEM_REPAIR)
+	if (!resource_contains_addr(&cxlds->dpa_res, cxl_ppr_ctx->dpa) ||
+	    val != EDAC_DO_MEM_REPAIR)
 		return -EINVAL;
 
 	return cxl_mem_perform_ppr(cxl_ppr_ctx);
-- 
2.34.1