mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: daniel.lezcano@linaro.org, tglx@linutronix.de
Cc: ghennadi.procopciuc@oss.nxp.com, S32@nxp.com,
	linux-kernel@vger.kernel.org
Subject: [PATCH 14/20] clocksource/drivers/vf-pit: Enable and disable module on error
Date: Sat,  5 Jul 2025 18:01:20 +0200	[thread overview]
Message-ID: <20250705160129.3688026-14-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <20250705160129.3688026-1-daniel.lezcano@linaro.org>

Encapsulate the calls to writel to enable and disable the PIT module
and make use of them. Add the missing module disablement in case of
error.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-vf-pit.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/clocksource/timer-vf-pit.c b/drivers/clocksource/timer-vf-pit.c
index 2799cff2a296..043e36b2165d 100644
--- a/drivers/clocksource/timer-vf-pit.c
+++ b/drivers/clocksource/timer-vf-pit.c
@@ -13,10 +13,12 @@
 /*
  * Each pit takes 0x10 Bytes register space
  */
-#define PITMCR		0x00
 #define PIT0_OFFSET	0x100
 #define PIT_CH(n)       (PIT0_OFFSET + 0x10 * (n))
 
+#define PITMCR(__base)	(__base)
+
+#define PITMCR_FRZ	BIT(0)
 #define PITMCR_MDIS	BIT(1)
 
 #define PITLDVAL(__base)	(__base)
@@ -52,6 +54,16 @@ static inline struct pit_timer *cs_to_pit(struct clocksource *cs)
 	return container_of(cs, struct pit_timer, cs);
 }
 
+static inline void pit_module_enable(void __iomem *base)
+{
+	writel(0, PITMCR(base));
+}
+
+static inline void pit_module_disable(void __iomem *base)
+{
+	writel(PITMCR_MDIS, PITMCR(base));
+}
+
 static inline void pit_timer_enable(struct pit_timer *pit)
 {
 	writel(PITTCTRL_TEN | PITTCTRL_TIE, PITTCTRL(pit->clkevt_base));
@@ -253,11 +265,11 @@ static int __init pit_timer_init(struct device_node *np)
 	clk_rate = clk_get_rate(pit_clk);
 
 	/* enable the pit module */
-	writel(~PITMCR_MDIS, timer_base + PITMCR);
+	pit_module_enable(timer_base);
 
 	ret = pit_clocksource_init(pit, name, timer_base, clk_rate);
 	if (ret)
-		goto out_disable_unprepare;
+		goto out_pit_module_disable;
 
 	ret = pit_clockevent_init(pit, name, timer_base, clk_rate, irq, 0);
 	if (ret)
@@ -267,7 +279,8 @@ static int __init pit_timer_init(struct device_node *np)
 
 out_pit_clocksource_unregister:
 	clocksource_unregister(&pit->cs);
-out_disable_unprepare:
+out_pit_module_disable:
+	pit_module_disable(timer_base);
 	clk_disable_unprepare(pit_clk);
 out_clk_put:
 	clk_put(pit_clk);
-- 
2.43.0


  parent reply	other threads:[~2025-07-05 16:01 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-05 16:01 [PATCH 01/20] clocksource/drivers/vf-pit: Replace raw_readl/writel to reald/writel Daniel Lezcano
2025-07-05 16:01 ` [PATCH 02/20] clocksource/drivers/vf_pit: Add COMPILE_TEST option Daniel Lezcano
2025-07-05 16:01 ` [PATCH 03/20] clocksource/drivers/vf_pit: Set the scene for multiple timers Daniel Lezcano
2025-07-07 12:04   ` Ghennadi Procopciuc
2025-07-05 16:01 ` [PATCH 04/20] clocksource/drivers/vf_pit: Rework the base address usage Daniel Lezcano
2025-07-07 12:03   ` Ghennadi Procopciuc
2025-07-24 17:29     ` Daniel Lezcano
2025-07-25  5:10       ` Ghennadi Procopciuc
2025-07-05 16:01 ` [PATCH 05/20] clocksource/drivers/vf_pit: Pass the cpu number as parameter Daniel Lezcano
2025-07-07  9:33   ` Ghennadi Procopciuc
2025-07-24 17:30     ` Daniel Lezcano
2025-07-05 16:01 ` [PATCH 06/20] clocksource/drivers/vf_pit: Encapsulate the initialization of the cycles_per_jiffy Daniel Lezcano
2025-07-05 16:01 ` [PATCH 07/20] clocksource/drivers/vf-pit: Allocate the struct timer at init time Daniel Lezcano
2025-07-05 16:01 ` [PATCH 08/20] clocksource/drivers/vf-pit: Convert raw values to BIT macros Daniel Lezcano
2025-07-05 16:01 ` [PATCH 09/20] clocksource/drivers/vf-pit: Register the clocksource from the driver Daniel Lezcano
2025-07-07 12:02   ` Ghennadi Procopciuc
2025-07-26 19:37     ` Daniel Lezcano
2025-07-05 16:01 ` [PATCH 10/20] clocksource/drivers/vf-pit: Encapsulate the macros Daniel Lezcano
2025-07-07 12:03   ` Ghennadi Procopciuc
2025-07-28  8:35     ` Daniel Lezcano
2025-07-05 16:01 ` [PATCH 11/20] clocksource/drivers/vf-pit: Encapsulate the PTLCVAL macro Daniel Lezcano
2025-07-05 16:01 ` [PATCH 12/20] clocksource/drivers/vf-pit: Use the node name for the interrupt and timer names Daniel Lezcano
2025-07-25  5:12   ` Ghennadi Procopciuc
2025-07-05 16:01 ` [PATCH 13/20] clocksource/drivers/vf-pit: Encapsulate clocksource enable / disable Daniel Lezcano
2025-07-05 16:01 ` Daniel Lezcano [this message]
2025-07-05 16:01 ` [PATCH 15/20] clocksource/drivers/vf-pit: Encapsulate set counter function Daniel Lezcano
2025-07-05 16:01 ` [PATCH 16/20] clocksource/drivers/vf-pit: Consolidate calls to pit_*_disable/enable Daniel Lezcano
2025-07-07 10:28   ` Ghennadi Procopciuc
2025-07-05 16:01 ` [PATCH 17/20] clocksource/drivers/vf-pit: Unify the function name for irq ack Daniel Lezcano
2025-07-05 16:01 ` [PATCH 18/20] clocksource/drivers/pit: Rename the VF PIT to NXP PIT Daniel Lezcano
2025-07-05 16:01 ` [PATCH 19/20] clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support Daniel Lezcano
2025-07-06 22:13   ` kernel test robot
2025-07-07 12:02   ` Ghennadi Procopciuc
2025-07-28  8:31     ` Daniel Lezcano
2025-07-05 16:01 ` [PATCH 20/20] dt: bindings: fsl,vf610-pit: Add compatible for s32g2 and s32g3 Daniel Lezcano
2025-07-08 17:27   ` Rob Herring
2025-07-07  9:11 ` [PATCH 01/20] clocksource/drivers/vf-pit: Replace raw_readl/writel to reald/writel Ghennadi Procopciuc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250705160129.3688026-14-daniel.lezcano@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=S32@nxp.com \
    --cc=ghennadi.procopciuc@oss.nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®