[PATCH v6 0/3] Add support for WoM (Wake-on-Motion) feature

[PATCH v6 0/3] Add support for WoM (Wake-on-Motion) feature

[Jean-Baptiste Maneyrol via B4 Relay]

Similar to feature present in older chip, it compares the magnitude of
the last 2 accel samples against a threshold and returns an interrupt
even if the value is higher.

WoM maps best to accel x|y|z ROC event. This series add system wakeup
functionality if WoM is on and wakeup is enabled when system suspends.

This series also prepare the driver for supporting further APEX
features like pedometer, tilt, ... It introduces an apex structure that
will hold all APEX settings and track the enable state.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
---
Changes in v6:
- Rework scoped_guard() for not using break
- Reword move DMA buffers initial patch to add better explanations
- Link to v5: https://lore.kernel.org/r/20250623-losd-3-inv-icm42600-add-wom-support-v5-0-4b3b33e028fe@tdk.com

Changes in v5:
- Add preliminary patch to move DMA buffers at end of structure.
- Check return code of devm_device_init_wakeup()
- Rebase and rework series to use kernel types
- Link to v4: https://lore.kernel.org/r/20250613-losd-3-inv-icm42600-add-wom-support-v4-0-7e5f554201bf@tdk.com

Changes in v4:
- Avoid mix of gotos and scoped_guard()
- Invert conditionals for better code readability
- Switch to use devm_device_init_wakeup()
- Several code readabilities improvements
- Link to v3: https://lore.kernel.org/r/20250418-losd-3-inv-icm42600-add-wom-support-v3-0-7a180af02bfe@tdk.com

Changes in v3:
- Rewrites following code review
- Link to v2: https://lore.kernel.org/r/20250415-losd-3-inv-icm42600-add-wom-support-v2-0-de94dfb92b7e@tdk.com

Changes in v2:
- change struct order to avoir DMA overflow
- separate wom enable/disable in 2 functions
- delete mutex rework
- Link to v1: https://lore.kernel.org/r/20250220-losd-3-inv-icm42600-add-wom-support-v1-0-9b937f986954@tdk.com

---
Jean-Baptiste Maneyrol (3):
      iio: imu: inv_icm42600: reorganize DMA aligned buffers in structure
      iio: imu: inv_icm42600: add WoM support
      iio: imu: inv_icm42600: add wakeup functionality for Wake-on-Motion

 drivers/iio/imu/inv_icm42600/inv_icm42600.h        |  56 +++-
 drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c  | 329 ++++++++++++++++++++-
 drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c |   2 +-
 drivers/iio/imu/inv_icm42600/inv_icm42600_core.c   |  97 +++++-
 4 files changed, 470 insertions(+), 14 deletions(-)
---
base-commit: 42498420746a4db923f03d048a0ebc9bd2371f56
change-id: 20250220-losd-3-inv-icm42600-add-wom-support-0620fef9db23

Best regards,
-- 
Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>

[PATCH v6 1/3] iio: imu: inv_icm42600: reorganize DMA aligned buffers in structure

[Jean-Baptiste Maneyrol via B4 Relay]

From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>

Move all DMA aligned buffers together at the end of the structure.

1. Timestamp anynomous structure is not used with DMA so it doesn't
belong after __aligned(IIO_DMA_MINALIGN).
2. struct inv_icm42600_fifo contains it's own __aligned(IIO_DMA_MINALIGN)
within it at the end so it should not be after __aligned(IIO_DMA_MINALIGN)
in the outer struct either.
3. Normally 1 would have been considered a bug, but because of the extra
alignment from 2, it actually was OK, but we shouldn't be relying on such
quirks.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
---
 drivers/iio/imu/inv_icm42600/inv_icm42600.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600.h b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
index 55ed1ddaa8cb5dd410d17db3866fa0f22f18e9d2..9b2cce172670c5513f18d5979a5ff563e9af4cb3 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600.h
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
@@ -148,9 +148,9 @@ struct inv_icm42600_suspended {
  *  @suspended:		suspended sensors configuration.
  *  @indio_gyro:	gyroscope IIO device.
  *  @indio_accel:	accelerometer IIO device.
- *  @buffer:		data transfer buffer aligned for DMA.
- *  @fifo:		FIFO management structure.
  *  @timestamp:		interrupt timestamps.
+ *  @fifo:		FIFO management structure.
+ *  @buffer:		data transfer buffer aligned for DMA.
  */
 struct inv_icm42600_state {
 	struct mutex lock;
@@ -164,12 +164,12 @@ struct inv_icm42600_state {
 	struct inv_icm42600_suspended suspended;
 	struct iio_dev *indio_gyro;
 	struct iio_dev *indio_accel;
-	u8 buffer[2] __aligned(IIO_DMA_MINALIGN);
-	struct inv_icm42600_fifo fifo;
 	struct {
 		s64 gyro;
 		s64 accel;
 	} timestamp;
+	struct inv_icm42600_fifo fifo;
+	u8 buffer[2] __aligned(IIO_DMA_MINALIGN);
 };
 
 

-- 
2.49.0

[PATCH v6 2/3] iio: imu: inv_icm42600: add WoM support

[Jean-Baptiste Maneyrol via B4 Relay]

From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>

Add WoM as accel roc rising x|y|z event.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
---
 drivers/iio/imu/inv_icm42600/inv_icm42600.h        |  48 ++-
 drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c  | 324 ++++++++++++++++++++-
 drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c |   2 +-
 drivers/iio/imu/inv_icm42600/inv_icm42600_core.c   |  58 ++++
 4 files changed, 427 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600.h b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
index 9b2cce172670c5513f18d5979a5ff563e9af4cb3..6af96df9f0ed195a211c40ca0075678f80b9424f 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600.h
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
@@ -135,6 +135,14 @@ struct inv_icm42600_suspended {
 	bool temp;
 };
 
+struct inv_icm42600_apex {
+	unsigned int on;
+	struct {
+		u64 value;
+		bool enable;
+	} wom;
+};
+
 /**
  *  struct inv_icm42600_state - driver state variables
  *  @lock:		lock for serializing multiple registers access.
@@ -149,6 +157,7 @@ struct inv_icm42600_suspended {
  *  @indio_gyro:	gyroscope IIO device.
  *  @indio_accel:	accelerometer IIO device.
  *  @timestamp:		interrupt timestamps.
+ *  @apex:		APEX (Advanced Pedometer and Event detection) management
  *  @fifo:		FIFO management structure.
  *  @buffer:		data transfer buffer aligned for DMA.
  */
@@ -168,8 +177,9 @@ struct inv_icm42600_state {
 		s64 gyro;
 		s64 accel;
 	} timestamp;
+	struct inv_icm42600_apex apex;
 	struct inv_icm42600_fifo fifo;
-	u8 buffer[2] __aligned(IIO_DMA_MINALIGN);
+	u8 buffer[3] __aligned(IIO_DMA_MINALIGN);
 };
 
 
@@ -253,6 +263,18 @@ struct inv_icm42600_sensor_state {
 #define INV_ICM42600_REG_FIFO_COUNT			0x002E
 #define INV_ICM42600_REG_FIFO_DATA			0x0030
 
+#define INV_ICM42600_REG_INT_STATUS2			0x0037
+#define INV_ICM42600_INT_STATUS2_SMD_INT		BIT(3)
+#define INV_ICM42600_INT_STATUS2_WOM_INT		GENMASK(2, 0)
+
+#define INV_ICM42600_REG_INT_STATUS3			0x0038
+#define INV_ICM42600_INT_STATUS3_STEP_DET_INT		BIT(5)
+#define INV_ICM42600_INT_STATUS3_STEP_CNT_OVF_INT	BIT(4)
+#define INV_ICM42600_INT_STATUS3_TILT_DET_INT		BIT(3)
+#define INV_ICM42600_INT_STATUS3_WAKE_INT		BIT(2)
+#define INV_ICM42600_INT_STATUS3_SLEEP_INT		BIT(1)
+#define INV_ICM42600_INT_STATUS3_TAP_DET_INT		BIT(0)
+
 #define INV_ICM42600_REG_SIGNAL_PATH_RESET		0x004B
 #define INV_ICM42600_SIGNAL_PATH_RESET_DMP_INIT_EN	BIT(6)
 #define INV_ICM42600_SIGNAL_PATH_RESET_DMP_MEM_RESET	BIT(5)
@@ -309,6 +331,14 @@ struct inv_icm42600_sensor_state {
 #define INV_ICM42600_TMST_CONFIG_TMST_FSYNC_EN		BIT(1)
 #define INV_ICM42600_TMST_CONFIG_TMST_EN		BIT(0)
 
+#define INV_ICM42600_REG_SMD_CONFIG			0x0057
+#define INV_ICM42600_SMD_CONFIG_WOM_INT_MODE		BIT(3)
+#define INV_ICM42600_SMD_CONFIG_WOM_MODE		BIT(2)
+#define INV_ICM42600_SMD_CONFIG_SMD_MODE_OFF		0x00
+#define INV_ICM42600_SMD_CONFIG_SMD_MODE_WOM		0x01
+#define INV_ICM42600_SMD_CONFIG_SMD_MODE_SHORT		0x02
+#define INV_ICM42600_SMD_CONFIG_SMD_MODE_LONG		0x03
+
 #define INV_ICM42600_REG_FIFO_CONFIG1			0x005F
 #define INV_ICM42600_FIFO_CONFIG1_RESUME_PARTIAL_RD	BIT(6)
 #define INV_ICM42600_FIFO_CONFIG1_WM_GT_TH		BIT(5)
@@ -338,6 +368,11 @@ struct inv_icm42600_sensor_state {
 #define INV_ICM42600_INT_SOURCE0_FIFO_FULL_INT1_EN	BIT(1)
 #define INV_ICM42600_INT_SOURCE0_UI_AGC_RDY_INT1_EN	BIT(0)
 
+#define INV_ICM42600_REG_INT_SOURCE1			0x0066
+#define INV_ICM42600_INT_SOURCE1_I3C_ERROR_INT1_EN	BIT(6)
+#define INV_ICM42600_INT_SOURCE1_SMD_INT1_EN		BIT(3)
+#define INV_ICM42600_INT_SOURCE1_WOM_INT1_EN		GENMASK(2, 0)
+
 #define INV_ICM42600_REG_WHOAMI				0x0075
 #define INV_ICM42600_WHOAMI_ICM42600			0x40
 #define INV_ICM42600_WHOAMI_ICM42602			0x41
@@ -373,6 +408,10 @@ struct inv_icm42600_sensor_state {
 #define INV_ICM42600_INTF_CONFIG6_I3C_SDR_EN		BIT(0)
 
 /* User bank 4 (MSB 0x40) */
+#define INV_ICM42600_REG_ACCEL_WOM_X_THR		0x404A
+#define INV_ICM42600_REG_ACCEL_WOM_Y_THR		0x404B
+#define INV_ICM42600_REG_ACCEL_WOM_Z_THR		0x404C
+
 #define INV_ICM42600_REG_INT_SOURCE8			0x404F
 #define INV_ICM42600_INT_SOURCE8_FSYNC_IBI_EN		BIT(5)
 #define INV_ICM42600_INT_SOURCE8_PLL_RDY_IBI_EN		BIT(4)
@@ -423,6 +462,9 @@ int inv_icm42600_set_gyro_conf(struct inv_icm42600_state *st,
 int inv_icm42600_set_temp_conf(struct inv_icm42600_state *st, bool enable,
 			       unsigned int *sleep_ms);
 
+int inv_icm42600_enable_wom(struct inv_icm42600_state *st);
+int inv_icm42600_disable_wom(struct inv_icm42600_state *st);
+
 int inv_icm42600_debugfs_reg(struct iio_dev *indio_dev, unsigned int reg,
 			     unsigned int writeval, unsigned int *readval);
 
@@ -437,4 +479,8 @@ struct iio_dev *inv_icm42600_accel_init(struct inv_icm42600_state *st);
 
 int inv_icm42600_accel_parse_fifo(struct iio_dev *indio_dev);
 
+void inv_icm42600_accel_handle_events(struct iio_dev *indio_dev,
+				      unsigned int status2, unsigned int status3,
+				      s64 timestamp);
+
 #endif
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
index 8a6f09e68f4934b406939a72f66486f408f43a21..c52d77cab040dcfb11bc1f9430a3b1dfd52660a9 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
@@ -10,9 +10,12 @@
 #include <linux/regmap.h>
 #include <linux/delay.h>
 #include <linux/math64.h>
+#include <linux/minmax.h>
+#include <linux/units.h>
 
 #include <linux/iio/buffer.h>
 #include <linux/iio/common/inv_sensors_timestamp.h>
+#include <linux/iio/events.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/kfifo_buf.h>
 
@@ -47,6 +50,16 @@
 		.ext_info = _ext_info,					\
 	}
 
+#define INV_ICM42600_ACCEL_EVENT_CHAN(_modifier, _events, _events_nb)	\
+	{								\
+		.type = IIO_ACCEL,					\
+		.modified = 1,						\
+		.channel2 = _modifier,					\
+		.event_spec = _events,					\
+		.num_event_specs = _events_nb,				\
+		.scan_index = -1,					\
+	}
+
 enum inv_icm42600_accel_scan {
 	INV_ICM42600_ACCEL_SCAN_X,
 	INV_ICM42600_ACCEL_SCAN_Y,
@@ -82,14 +95,15 @@ static int inv_icm42600_accel_power_mode_set(struct iio_dev *indio_dev,
 	if (idx >= ARRAY_SIZE(inv_icm42600_accel_power_mode_values))
 		return -EINVAL;
 
-	if (iio_buffer_enabled(indio_dev))
-		return -EBUSY;
-
 	power_mode = inv_icm42600_accel_power_mode_values[idx];
 	filter = inv_icm42600_accel_filter_values[idx];
 
 	guard(mutex)(&st->lock);
 
+	/* cannot change if accel sensor is on */
+	if (st->conf.accel.mode != INV_ICM42600_SENSOR_MODE_OFF)
+		return -EBUSY;
+
 	/* prevent change if power mode is not supported by the ODR */
 	switch (power_mode) {
 	case INV_ICM42600_SENSOR_MODE_LOW_NOISE:
@@ -160,6 +174,16 @@ static const struct iio_chan_spec_ext_info inv_icm42600_accel_ext_infos[] = {
 	{ }
 };
 
+/* WoM event: rising ROC */
+static const struct iio_event_spec inv_icm42600_wom_events[] = {
+	{
+		.type = IIO_EV_TYPE_ROC,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+				 BIT(IIO_EV_INFO_VALUE),
+	},
+};
+
 static const struct iio_chan_spec inv_icm42600_accel_channels[] = {
 	INV_ICM42600_ACCEL_CHAN(IIO_MOD_X, INV_ICM42600_ACCEL_SCAN_X,
 				inv_icm42600_accel_ext_infos),
@@ -169,6 +193,8 @@ static const struct iio_chan_spec inv_icm42600_accel_channels[] = {
 				inv_icm42600_accel_ext_infos),
 	INV_ICM42600_TEMP_CHAN(INV_ICM42600_ACCEL_SCAN_TEMP),
 	IIO_CHAN_SOFT_TIMESTAMP(INV_ICM42600_ACCEL_SCAN_TIMESTAMP),
+	INV_ICM42600_ACCEL_EVENT_CHAN(IIO_MOD_X_OR_Y_OR_Z, inv_icm42600_wom_events,
+				      ARRAY_SIZE(inv_icm42600_wom_events)),
 };
 
 /*
@@ -294,6 +320,180 @@ static int inv_icm42600_accel_read_sensor(struct iio_dev *indio_dev,
 	return ret;
 }
 
+static unsigned int inv_icm42600_accel_convert_roc_to_wom(u64 roc,
+							  int accel_hz, int accel_uhz)
+{
+	/* 1000/256mg per LSB converted in µm/s² */
+	const unsigned int convert = (9807U * (MICRO / MILLI)) / 256U;
+	u64 value;
+	u64 freq_uhz;
+
+	/* return 0 only if roc is 0 */
+	if (roc == 0)
+		return 0;
+
+	freq_uhz = (u64)accel_hz * MICRO + (u64)accel_uhz;
+	value = div64_u64(roc * MICRO, freq_uhz * (u64)convert);
+
+	/* limit value to 8 bits and prevent 0 */
+	return clamp(value, 1, 255);
+}
+
+static u64 inv_icm42600_accel_convert_wom_to_roc(unsigned int threshold,
+						 int accel_hz, int accel_uhz)
+{
+	/* 1000/256mg per LSB converted in µm/s² */
+	const unsigned int convert = (9807U * (MICRO / MILLI)) / 256U;
+	u64 value;
+	u64 freq_uhz;
+
+	value = threshold * convert;
+	freq_uhz = (u64)accel_hz * MICRO + (u64)accel_uhz;
+
+	/* compute the differential by multiplying by the frequency */
+	return div_u64(value * freq_uhz, MICRO);
+}
+
+static int inv_icm42600_accel_set_wom_threshold(struct inv_icm42600_state *st,
+						u64 value,
+						int accel_hz, int accel_uhz)
+{
+	unsigned int threshold;
+	int ret;
+
+	/* convert roc to wom threshold and convert back to handle clipping */
+	threshold = inv_icm42600_accel_convert_roc_to_wom(value, accel_hz, accel_uhz);
+	value = inv_icm42600_accel_convert_wom_to_roc(threshold, accel_hz, accel_uhz);
+
+	dev_dbg(regmap_get_device(st->map), "wom_threshold: 0x%x\n", threshold);
+
+	/* set accel WoM threshold for the 3 axes */
+	st->buffer[0] = threshold;
+	st->buffer[1] = threshold;
+	st->buffer[2] = threshold;
+	ret = regmap_bulk_write(st->map, INV_ICM42600_REG_ACCEL_WOM_X_THR, st->buffer, 3);
+	if (ret)
+		return ret;
+
+	st->apex.wom.value = value;
+
+	return 0;
+}
+
+static int _inv_icm42600_accel_enable_wom(struct iio_dev *indio_dev)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_icm42600_sensor_state *accel_st = iio_priv(indio_dev);
+	struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT;
+	unsigned int sleep_ms = 0;
+	int ret;
+
+	scoped_guard(mutex, &st->lock) {
+		/* turn on accel sensor */
+		conf.mode = accel_st->power_mode;
+		conf.filter = accel_st->filter;
+		ret = inv_icm42600_set_accel_conf(st, &conf, &sleep_ms);
+		if (ret)
+			return ret;
+	}
+
+	if (sleep_ms)
+		msleep(sleep_ms);
+
+	scoped_guard(mutex, &st->lock) {
+		ret = inv_icm42600_enable_wom(st);
+		if (ret)
+			return ret;
+		st->apex.on++;
+		st->apex.wom.enable = true;
+	}
+
+	return 0;
+}
+
+static int inv_icm42600_accel_enable_wom(struct iio_dev *indio_dev)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	struct device *pdev = regmap_get_device(st->map);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(pdev);
+	if (ret)
+		return ret;
+
+	ret = _inv_icm42600_accel_enable_wom(indio_dev);
+	if (ret) {
+		pm_runtime_mark_last_busy(pdev);
+		pm_runtime_put_autosuspend(pdev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int _inv_icm42600_accel_disable_wom(struct iio_dev *indio_dev)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT;
+	unsigned int sleep_ms = 0;
+	int ret;
+
+	scoped_guard(mutex, &st->lock) {
+		/*
+		 * Consider that turning off WoM is always working to avoid
+		 * blocking the chip in on mode and prevent going back to sleep.
+		 * If there is an error, the chip will anyway go back to sleep
+		 * and the feature will not work anymore.
+		 */
+		st->apex.wom.enable = false;
+		st->apex.on--;
+		ret = inv_icm42600_disable_wom(st);
+		if (ret)
+			return ret;
+		/* turn off accel sensor if not used */
+		if (!st->apex.on && !iio_buffer_enabled(indio_dev)) {
+			conf.mode = INV_ICM42600_SENSOR_MODE_OFF;
+			ret = inv_icm42600_set_accel_conf(st, &conf, &sleep_ms);
+			if (ret)
+				return ret;
+		}
+	}
+
+	if (sleep_ms)
+		msleep(sleep_ms);
+
+	return 0;
+}
+
+static int inv_icm42600_accel_disable_wom(struct iio_dev *indio_dev)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	struct device *pdev = regmap_get_device(st->map);
+	int ret;
+
+	ret = _inv_icm42600_accel_disable_wom(indio_dev);
+
+	pm_runtime_mark_last_busy(pdev);
+	pm_runtime_put_autosuspend(pdev);
+
+	return ret;
+}
+
+void inv_icm42600_accel_handle_events(struct iio_dev *indio_dev,
+				      unsigned int status2, unsigned int status3,
+				      s64 timestamp)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	u64 ev_code;
+
+	/* handle WoM event */
+	if (st->apex.wom.enable && (status2 & INV_ICM42600_INT_STATUS2_WOM_INT)) {
+		ev_code = IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X_OR_Y_OR_Z,
+					     IIO_EV_TYPE_ROC, IIO_EV_DIR_RISING);
+		iio_push_event(indio_dev, ev_code, timestamp);
+	}
+}
+
 /* IIO format int + nano */
 static const int inv_icm42600_accel_scale[] = {
 	/* +/- 16G => 0.004788403 m/s-2 */
@@ -464,6 +664,10 @@ static int inv_icm42600_accel_write_odr(struct iio_dev *indio_dev,
 		goto out_unlock;
 
 	ret = inv_icm42600_set_accel_conf(st, &conf, NULL);
+	if (ret)
+		goto out_unlock;
+	/* update wom threshold since roc is dependent on sampling frequency */
+	ret = inv_icm42600_accel_set_wom_threshold(st, st->apex.wom.value, val, val2);
 	if (ret)
 		goto out_unlock;
 	inv_icm42600_buffer_update_fifo_period(st);
@@ -819,6 +1023,116 @@ static int inv_icm42600_accel_hwfifo_flush(struct iio_dev *indio_dev,
 	return ret;
 }
 
+static int inv_icm42600_accel_read_event_config(struct iio_dev *indio_dev,
+						const struct iio_chan_spec *chan,
+						enum iio_event_type type,
+						enum iio_event_direction dir)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+
+	/* handle only WoM (roc rising) event */
+	if (type != IIO_EV_TYPE_ROC || dir != IIO_EV_DIR_RISING)
+		return -EINVAL;
+
+	guard(mutex)(&st->lock);
+
+	return st->apex.wom.enable ? 1 : 0;
+}
+
+static int inv_icm42600_accel_write_event_config(struct iio_dev *indio_dev,
+						 const struct iio_chan_spec *chan,
+						 enum iio_event_type type,
+						 enum iio_event_direction dir,
+						 bool state)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+
+	/* handle only WoM (roc rising) event */
+	if (type != IIO_EV_TYPE_ROC || dir != IIO_EV_DIR_RISING)
+		return -EINVAL;
+
+	scoped_guard(mutex, &st->lock) {
+		if (st->apex.wom.enable == state)
+			return 0;
+	}
+
+	if (state)
+		return inv_icm42600_accel_enable_wom(indio_dev);
+
+	return inv_icm42600_accel_disable_wom(indio_dev);
+}
+
+static int inv_icm42600_accel_read_event_value(struct iio_dev *indio_dev,
+					       const struct iio_chan_spec *chan,
+					       enum iio_event_type type,
+					       enum iio_event_direction dir,
+					       enum iio_event_info info,
+					       int *val, int *val2)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	u32 rem;
+
+	/* handle only WoM (roc rising) event value */
+	if (type != IIO_EV_TYPE_ROC || dir != IIO_EV_DIR_RISING)
+		return -EINVAL;
+
+	guard(mutex)(&st->lock);
+
+	/* return value in micro */
+	*val = div_u64_rem(st->apex.wom.value, MICRO, &rem);
+	*val2 = rem;
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int _inv_icm42600_accel_wom_value(struct inv_icm42600_state *st,
+					 int val, int val2)
+{
+	u64 value;
+	unsigned int accel_hz, accel_uhz;
+	int ret;
+
+	guard(mutex)(&st->lock);
+
+	ret = inv_icm42600_accel_read_odr(st, &accel_hz, &accel_uhz);
+	if (ret < 0)
+		return ret;
+
+	value = (u64)val * MICRO + (u64)val2;
+
+	return inv_icm42600_accel_set_wom_threshold(st, value,
+						    accel_hz, accel_uhz);
+}
+
+static int inv_icm42600_accel_write_event_value(struct iio_dev *indio_dev,
+						const struct iio_chan_spec *chan,
+						enum iio_event_type type,
+						enum iio_event_direction dir,
+						enum iio_event_info info,
+						int val, int val2)
+{
+	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+	struct device *dev = regmap_get_device(st->map);
+	int ret;
+
+	/* handle only WoM (roc rising) event value */
+	if (type != IIO_EV_TYPE_ROC || dir != IIO_EV_DIR_RISING)
+		return -EINVAL;
+
+	if (val < 0 || val2 < 0)
+		return -EINVAL;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		return ret;
+
+	ret = _inv_icm42600_accel_wom_value(st, val, val2);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
 static const struct iio_info inv_icm42600_accel_info = {
 	.read_raw = inv_icm42600_accel_read_raw,
 	.read_avail = inv_icm42600_accel_read_avail,
@@ -828,6 +1142,10 @@ static const struct iio_info inv_icm42600_accel_info = {
 	.update_scan_mode = inv_icm42600_accel_update_scan_mode,
 	.hwfifo_set_watermark = inv_icm42600_accel_hwfifo_set_watermark,
 	.hwfifo_flush_to_buffer = inv_icm42600_accel_hwfifo_flush,
+	.read_event_config = inv_icm42600_accel_read_event_config,
+	.write_event_config = inv_icm42600_accel_write_event_config,
+	.read_event_value = inv_icm42600_accel_read_event_value,
+	.write_event_value = inv_icm42600_accel_write_event_value,
 };
 
 struct iio_dev *inv_icm42600_accel_init(struct inv_icm42600_state *st)
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c
index 00b9db52ca785589cedf1c90a857c2f420e18995..7c4ed981db043b4e8f3967b0802655d34f863954 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c
@@ -422,7 +422,7 @@ static int inv_icm42600_buffer_postdisable(struct iio_dev *indio_dev)
 	conf.mode = INV_ICM42600_SENSOR_MODE_OFF;
 	if (sensor == INV_ICM42600_SENSOR_GYRO)
 		ret = inv_icm42600_set_gyro_conf(st, &conf, &sleep_sensor);
-	else
+	else if (!st->apex.on)
 		ret = inv_icm42600_set_accel_conf(st, &conf, &sleep_sensor);
 	if (ret)
 		goto out_unlock;
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
index a32236c78375df24697026cae1c924f7471af916..283483ed82ff42b4f9b80d99084c118786054c37 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -404,6 +404,37 @@ int inv_icm42600_set_temp_conf(struct inv_icm42600_state *st, bool enable,
 					  sleep_ms);
 }
 
+int inv_icm42600_enable_wom(struct inv_icm42600_state *st)
+{
+	int ret;
+
+	/* enable WoM hardware */
+	ret = regmap_write(st->map, INV_ICM42600_REG_SMD_CONFIG,
+			   INV_ICM42600_SMD_CONFIG_SMD_MODE_WOM |
+			   INV_ICM42600_SMD_CONFIG_WOM_MODE);
+	if (ret)
+		return ret;
+
+	/* enable WoM interrupt */
+	return regmap_set_bits(st->map, INV_ICM42600_REG_INT_SOURCE1,
+			      INV_ICM42600_INT_SOURCE1_WOM_INT1_EN);
+}
+
+int inv_icm42600_disable_wom(struct inv_icm42600_state *st)
+{
+	int ret;
+
+	/* disable WoM interrupt */
+	ret = regmap_clear_bits(st->map, INV_ICM42600_REG_INT_SOURCE1,
+				INV_ICM42600_INT_SOURCE1_WOM_INT1_EN);
+	if (ret)
+		return ret;
+
+	/* disable WoM hardware */
+	return regmap_write(st->map, INV_ICM42600_REG_SMD_CONFIG,
+			    INV_ICM42600_SMD_CONFIG_SMD_MODE_OFF);
+}
+
 int inv_icm42600_debugfs_reg(struct iio_dev *indio_dev, unsigned int reg,
 			     unsigned int writeval, unsigned int *readval)
 {
@@ -548,6 +579,19 @@ static irqreturn_t inv_icm42600_irq_handler(int irq, void *_data)
 
 	mutex_lock(&st->lock);
 
+	if (st->apex.on) {
+		unsigned int status2, status3;
+
+		/* read INT_STATUS2 and INT_STATUS3 in 1 operation */
+		ret = regmap_bulk_read(st->map, INV_ICM42600_REG_INT_STATUS2, st->buffer, 2);
+		if (ret)
+			goto out_unlock;
+		status2 = st->buffer[0];
+		status3 = st->buffer[1];
+		inv_icm42600_accel_handle_events(st->indio_accel, status2, status3,
+						 st->timestamp.accel);
+	}
+
 	ret = regmap_read(st->map, INV_ICM42600_REG_INT_STATUS, &status);
 	if (ret)
 		goto out_unlock;
@@ -819,6 +863,13 @@ static int inv_icm42600_suspend(struct device *dev)
 			goto out_unlock;
 	}
 
+	/* disable APEX features */
+	if (st->apex.wom.enable) {
+		ret = inv_icm42600_disable_wom(st);
+		if (ret)
+			goto out_unlock;
+	}
+
 	ret = inv_icm42600_set_pwr_mgmt0(st, INV_ICM42600_SENSOR_MODE_OFF,
 					 INV_ICM42600_SENSOR_MODE_OFF, false,
 					 NULL);
@@ -860,6 +911,13 @@ static int inv_icm42600_resume(struct device *dev)
 	if (ret)
 		goto out_unlock;
 
+	/* restore APEX features */
+	if (st->apex.wom.enable) {
+		ret = inv_icm42600_enable_wom(st);
+		if (ret)
+			goto out_unlock;
+	}
+
 	/* restore FIFO data streaming */
 	if (st->fifo.on) {
 		inv_sensors_timestamp_reset(&gyro_st->ts);

-- 
2.49.0

[PATCH v6 3/3] iio: imu: inv_icm42600: add wakeup functionality for Wake-on-Motion

[Jean-Baptiste Maneyrol via B4 Relay]

From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>

When Wake-on-Motion is on, enable system wakeup and keep the chip on
for waking up the system with an interrupt.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
---
 drivers/iio/imu/inv_icm42600/inv_icm42600.h       |  2 +
 drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c |  5 +++
 drivers/iio/imu/inv_icm42600/inv_icm42600_core.c  | 53 +++++++++++++++++------
 3 files changed, 47 insertions(+), 13 deletions(-)

diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600.h b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
index 6af96df9f0ed195a211c40ca0075678f80b9424f..1430ab4f1dea5d5ba6277d74275fc44a6cd30eb8 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600.h
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
@@ -151,6 +151,7 @@ struct inv_icm42600_apex {
  *  @map:		regmap pointer.
  *  @vdd_supply:	VDD voltage regulator for the chip.
  *  @vddio_supply:	I/O voltage regulator for the chip.
+ *  @irq:		chip irq, required to enable/disable and set wakeup
  *  @orientation:	sensor chip orientation relative to main hardware.
  *  @conf:		chip sensors configurations.
  *  @suspended:		suspended sensors configuration.
@@ -168,6 +169,7 @@ struct inv_icm42600_state {
 	struct regmap *map;
 	struct regulator *vdd_supply;
 	struct regulator *vddio_supply;
+	int irq;
 	struct iio_mount_matrix orientation;
 	struct inv_icm42600_conf conf;
 	struct inv_icm42600_suspended suspended;
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
index c52d77cab040dcfb11bc1f9430a3b1dfd52660a9..7a28051330b79098bfa94b8c8c78c2bce20b7230 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
@@ -1206,6 +1206,11 @@ struct iio_dev *inv_icm42600_accel_init(struct inv_icm42600_state *st)
 	if (ret)
 		return ERR_PTR(ret);
 
+	/* accel events are wakeup capable */
+	ret = devm_device_init_wakeup(&indio_dev->dev);
+	if (ret)
+		return ERR_PTR(ret);
+
 	return indio_dev;
 }
 
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
index 283483ed82ff42b4f9b80d99084c118786054c37..a4d42e7e21807f7954def431e9cf03dffaa5bd5e 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -765,6 +765,7 @@ int inv_icm42600_core_probe(struct regmap *regmap, int chip,
 	mutex_init(&st->lock);
 	st->chip = chip;
 	st->map = regmap;
+	st->irq = irq;
 
 	ret = iio_read_mount_matrix(dev, &st->orientation);
 	if (ret) {
@@ -843,6 +844,9 @@ EXPORT_SYMBOL_NS_GPL(inv_icm42600_core_probe, "IIO_ICM42600");
 static int inv_icm42600_suspend(struct device *dev)
 {
 	struct inv_icm42600_state *st = dev_get_drvdata(dev);
+	struct device *accel_dev;
+	bool wakeup;
+	int accel_conf;
 	int ret;
 
 	mutex_lock(&st->lock);
@@ -863,20 +867,32 @@ static int inv_icm42600_suspend(struct device *dev)
 			goto out_unlock;
 	}
 
-	/* disable APEX features */
-	if (st->apex.wom.enable) {
-		ret = inv_icm42600_disable_wom(st);
-		if (ret)
-			goto out_unlock;
+	/* keep chip on and wake-up capable if APEX and wakeup on */
+	accel_dev = &st->indio_accel->dev;
+	wakeup = st->apex.on && device_may_wakeup(accel_dev);
+	if (wakeup) {
+		/* keep accel on and setup irq for wakeup */
+		accel_conf = st->conf.accel.mode;
+		enable_irq_wake(st->irq);
+		disable_irq(st->irq);
+	} else {
+		/* disable APEX features and accel if wakeup disabled */
+		if (st->apex.wom.enable) {
+			ret = inv_icm42600_disable_wom(st);
+			if (ret)
+				goto out_unlock;
+		}
+		accel_conf = INV_ICM42600_SENSOR_MODE_OFF;
 	}
 
 	ret = inv_icm42600_set_pwr_mgmt0(st, INV_ICM42600_SENSOR_MODE_OFF,
-					 INV_ICM42600_SENSOR_MODE_OFF, false,
-					 NULL);
+					 accel_conf, false, NULL);
 	if (ret)
 		goto out_unlock;
 
-	regulator_disable(st->vddio_supply);
+	/* disable vddio regulator if chip is sleeping */
+	if (!wakeup)
+		regulator_disable(st->vddio_supply);
 
 out_unlock:
 	mutex_unlock(&st->lock);
@@ -892,13 +908,24 @@ static int inv_icm42600_resume(struct device *dev)
 	struct inv_icm42600_state *st = dev_get_drvdata(dev);
 	struct inv_icm42600_sensor_state *gyro_st = iio_priv(st->indio_gyro);
 	struct inv_icm42600_sensor_state *accel_st = iio_priv(st->indio_accel);
+	struct device *accel_dev;
+	bool wakeup;
 	int ret;
 
 	mutex_lock(&st->lock);
 
-	ret = inv_icm42600_enable_regulator_vddio(st);
-	if (ret)
-		goto out_unlock;
+	/* check wakeup capability */
+	accel_dev = &st->indio_accel->dev;
+	wakeup = st->apex.on && device_may_wakeup(accel_dev);
+	/* restore irq state or vddio if cut off */
+	if (wakeup) {
+		enable_irq(st->irq);
+		disable_irq_wake(st->irq);
+	} else {
+		ret = inv_icm42600_enable_regulator_vddio(st);
+		if (ret)
+			goto out_unlock;
+	}
 
 	pm_runtime_disable(dev);
 	pm_runtime_set_active(dev);
@@ -911,8 +938,8 @@ static int inv_icm42600_resume(struct device *dev)
 	if (ret)
 		goto out_unlock;
 
-	/* restore APEX features */
-	if (st->apex.wom.enable) {
+	/* restore APEX features if disabled */
+	if (!wakeup && st->apex.wom.enable) {
 		ret = inv_icm42600_enable_wom(st);
 		if (ret)
 			goto out_unlock;

-- 
2.49.0

Re: [PATCH v6 2/3] iio: imu: inv_icm42600: add WoM support

[Jonathan Cameron]

On Mon, 30 Jun 2025 21:47:30 +0200
Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@kernel.org> wrote:

> From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
> 
> Add WoM as accel roc rising x|y|z event.
> 
> Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
This will probably cross with the removal of explicit
pm_runtime_mark_last_busy() but we can deal with that as a follow up.

Given I haven't yet picked up the precursor for that we can't just fix
it whilst applying this.  It's harmless to have too many calls to that
though so not a problem


> +
> +static int inv_icm42600_accel_enable_wom(struct iio_dev *indio_dev)
> +{
> +	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
> +	struct device *pdev = regmap_get_device(st->map);
> +	int ret;
> +
> +	ret = pm_runtime_resume_and_get(pdev);
> +	if (ret)
> +		return ret;
> +
> +	ret = _inv_icm42600_accel_enable_wom(indio_dev);
> +	if (ret) {
> +		pm_runtime_mark_last_busy(pdev);
Here.

> +		pm_runtime_put_autosuspend(pdev);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
>
> +
> +static int inv_icm42600_accel_disable_wom(struct iio_dev *indio_dev)
> +{
> +	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
> +	struct device *pdev = regmap_get_device(st->map);
> +	int ret;
> +
> +	ret = _inv_icm42600_accel_disable_wom(indio_dev);
> +
> +	pm_runtime_mark_last_busy(pdev);
and here.
> +	pm_runtime_put_autosuspend(pdev);
> +
> +	return ret;
> +}
> +
>
> +static int inv_icm42600_accel_write_event_value(struct iio_dev *indio_dev,
> +						const struct iio_chan_spec *chan,
> +						enum iio_event_type type,
> +						enum iio_event_direction dir,
> +						enum iio_event_info info,
> +						int val, int val2)
> +{
> +	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
> +	struct device *dev = regmap_get_device(st->map);
> +	int ret;
> +
> +	/* handle only WoM (roc rising) event value */
> +	if (type != IIO_EV_TYPE_ROC || dir != IIO_EV_DIR_RISING)
> +		return -EINVAL;
> +
> +	if (val < 0 || val2 < 0)
> +		return -EINVAL;
> +
> +	ret = pm_runtime_resume_and_get(dev);
> +	if (ret)
> +		return ret;
> +
> +	ret = _inv_icm42600_accel_wom_value(st, val, val2);
> +
> +	pm_runtime_mark_last_busy(dev);
and here.

> +	pm_runtime_put_autosuspend(dev);
> +
> +	return ret;
> +}
> +
>

Re: [PATCH v6 0/3] Add support for WoM (Wake-on-Motion) feature

[Jonathan Cameron]

On Mon, 30 Jun 2025 21:47:28 +0200
Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@kernel.org> wrote:

> Similar to feature present in older chip, it compares the magnitude of
> the last 2 accel samples against a threshold and returns an interrupt
> even if the value is higher.
> 
> WoM maps best to accel x|y|z ROC event. This series add system wakeup
> functionality if WoM is on and wakeup is enabled when system suspends.
> 
> This series also prepare the driver for supporting further APEX
> features like pedometer, tilt, ... It introduces an apex structure that
> will hold all APEX settings and track the enable state.
Applied to the togreg branch of iio.git and pushed out initially as testing
for 0-day to poke at it.

Thanks,

Jonathan

> 
> Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
> ---
> Changes in v6:
> - Rework scoped_guard() for not using break
> - Reword move DMA buffers initial patch to add better explanations
> - Link to v5: https://lore.kernel.org/r/20250623-losd-3-inv-icm42600-add-wom-support-v5-0-4b3b33e028fe@tdk.com
> 
> Changes in v5:
> - Add preliminary patch to move DMA buffers at end of structure.
> - Check return code of devm_device_init_wakeup()
> - Rebase and rework series to use kernel types
> - Link to v4: https://lore.kernel.org/r/20250613-losd-3-inv-icm42600-add-wom-support-v4-0-7e5f554201bf@tdk.com
> 
> Changes in v4:
> - Avoid mix of gotos and scoped_guard()
> - Invert conditionals for better code readability
> - Switch to use devm_device_init_wakeup()
> - Several code readabilities improvements
> - Link to v3: https://lore.kernel.org/r/20250418-losd-3-inv-icm42600-add-wom-support-v3-0-7a180af02bfe@tdk.com
> 
> Changes in v3:
> - Rewrites following code review
> - Link to v2: https://lore.kernel.org/r/20250415-losd-3-inv-icm42600-add-wom-support-v2-0-de94dfb92b7e@tdk.com
> 
> Changes in v2:
> - change struct order to avoir DMA overflow
> - separate wom enable/disable in 2 functions
> - delete mutex rework
> - Link to v1: https://lore.kernel.org/r/20250220-losd-3-inv-icm42600-add-wom-support-v1-0-9b937f986954@tdk.com
> 
> ---
> Jean-Baptiste Maneyrol (3):
>       iio: imu: inv_icm42600: reorganize DMA aligned buffers in structure
>       iio: imu: inv_icm42600: add WoM support
>       iio: imu: inv_icm42600: add wakeup functionality for Wake-on-Motion
> 
>  drivers/iio/imu/inv_icm42600/inv_icm42600.h        |  56 +++-
>  drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c  | 329 ++++++++++++++++++++-
>  drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c |   2 +-
>  drivers/iio/imu/inv_icm42600/inv_icm42600_core.c   |  97 +++++-
>  4 files changed, 470 insertions(+), 14 deletions(-)
> ---
> base-commit: 42498420746a4db923f03d048a0ebc9bd2371f56
> change-id: 20250220-losd-3-inv-icm42600-add-wom-support-0620fef9db23
> 
> Best regards,

Re: [PATCH v6 3/3] iio: imu: inv_icm42600: add wakeup functionality for Wake-on-Motion

[Sean Nyekjaer]

On Mon, Jun 30, 2025 at 09:47:31PM +0100, Jean-Baptiste Maneyrol via B4 Relay wrote:
> From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
> 
> When Wake-on-Motion is on, enable system wakeup and keep the chip on
> for waking up the system with an interrupt.
> 
> Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
> ---

[...]

> diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
> index c52d77cab040dcfb11bc1f9430a3b1dfd52660a9..7a28051330b79098bfa94b8c8c78c2bce20b7230 100644
> --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
> +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
> @@ -1206,6 +1206,11 @@ struct iio_dev *inv_icm42600_accel_init(struct inv_icm42600_state *st)
>  	if (ret)
>  		return ERR_PTR(ret);
> 
> +	/* accel events are wakeup capable */
> +	ret = devm_device_init_wakeup(&indio_dev->dev);
> +	if (ret)
> +		return ERR_PTR(ret);

I don't know if it will work here, but the fxls8962af is controlling this
from the devicetree with:

	if (device_property_read_bool(dev, "wakeup-source")) {
		ret = devm_device_init_wakeup(dev);
	if (ret)
		return dev_err_probe(dev, ret, "Failed to init wakeup\n");
	}

Br,
/Sean