Re: [PATCH v6 4/4] arm64: dts: ti: Add support for AM62D2-EVM

[Bryan Brattlof <bb@ti.com>]

On July  4, 2025 thus sayeth Paresh Bhagat:
> AM62D-EVM evaluation module (EVM) is a low-cost expandable platform board
> designed for AM62D2 SoC from TI. It supports the following interfaces:
> 
> * 4 GB LPDDR4 RAM
> * x2 Gigabit Ethernet expansion connectors
> * x4 3.5mm TRS Audio Jack Line In
> * x4 3.5mm TRS Audio Jack Line Out
> * x2 Audio expansion connectors
> * x1 Type-A USB 2.0, x1 Type-C dual-role device (DRD) USB 2.0
> * x1 UHS-1 capable micro SD card slot
> * 32 GB eMMC Flash
> * 512 Mb OSPI NOR flash
> * x4 UARTs via USB 2.0-B
> * XDS110 for onboard JTAG debug using USB
> * Temperature sensors, user push buttons and LEDs
> 
> Although AM62D2 and AM62A7 differ in peripheral capabilities example
> multimedia, VPAC, and display subsystems, the core architecture remains
> same. To reduce duplication, AM62D support reuses the AM62A dtsi and the
> necessary overrides will be handled in SOC specific dtsi file and a
> board specific dts.
> 
> Add basic support for AM62D2-EVM.
> 
> Schematics Link - https://www.ti.com/lit/zip/sprcal5
> 
> Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> ---
>  arch/arm64/boot/dts/ti/Makefile          |   3 +
>  arch/arm64/boot/dts/ti/k3-am62d2-evm.dts | 617 +++++++++++++++++++++++
>  arch/arm64/boot/dts/ti/k3-am62d2.dtsi    |  20 +
>  3 files changed, 640 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am62d2.dtsi
>

Reviewed-by: Bryan Brattlof <bb@ti.com>

~Bryan