* [PATCH v2] arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file
@ 2025-07-07 19:08 Judith Mendez
2025-07-11 5:04 ` Vignesh Raghavendra
0 siblings, 1 reply; 2+ messages in thread
From: Judith Mendez @ 2025-07-07 19:08 UTC (permalink / raw)
To: Judith Mendez, Vignesh Raghavendra
Cc: Tero Kristo, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
linux-arm-kernel, devicetree, linux-kernel
This moves pinmux child nodes for sdhci0 node from k3-am62x-sk-common
to each top level board file. This is needed since we require internal
pullups for AM62x SK and not for AM62 LP SK since it has external
pullups on DATA 1-7.
Internal pulls are required for AM62 SK as per JESD84 spec
recommendation to prevent unconnected lines floating.
Fixes: d19a66ae488a ("arm64: dts: ti: k3-am625-sk: Enable on board peripherals")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v1:
- patch was split from series [0]
- merge conflict fix with disable-wp
v1[0]: https://lore.kernel.org/linux-mmc/20250624221230.1952291-1-jm@ti.com/
---
arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts | 24 +++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am625-sk.dts | 24 +++++++++++++++++++
.../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 24 -------------------
3 files changed, 48 insertions(+), 24 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
index aafdb90c0eb7..4609f366006e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
@@ -74,6 +74,22 @@ vddshv_sdio: regulator-4 {
};
&main_pmx0 {
+ main_mmc0_pins_default: main-mmc0-default-pins {
+ bootph-all;
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (V3) MMC0_CMD */
+ AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (Y1) MMC0_CLK */
+ AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (V2) MMC0_DAT0 */
+ AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (V1) MMC0_DAT1 */
+ AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (W2) MMC0_DAT2 */
+ AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (W1) MMC0_DAT3 */
+ AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (Y2) MMC0_DAT4 */
+ AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (W3) MMC0_DAT5 */
+ AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (W4) MMC0_DAT6 */
+ AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (V4) MMC0_DAT7 */
+ >;
+ };
+
vddshv_sdio_pins_default: vddshv-sdio-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
@@ -144,6 +160,14 @@ exp2: gpio@23 {
};
};
+&sdhci0 {
+ bootph-all;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc0_pins_default>;
+ status = "okay";
+};
+
&sdhci1 {
vmmc-supply = <&vdd_mmc1>;
vqmmc-supply = <&vddshv_sdio>;
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index 2fbfa3719345..d240165bda9c 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -106,6 +106,22 @@ vcc_1v8: regulator-5 {
};
&main_pmx0 {
+ main_mmc0_pins_default: main-mmc0-default-pins {
+ bootph-all;
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+ AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+ AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+ AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
+ AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
+ AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
+ AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
+ AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
+ AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
+ AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
+ >;
+ };
+
main_rgmii2_pins_default: main-rgmii2-default-pins {
bootph-all;
pinctrl-single,pins = <
@@ -195,6 +211,14 @@ exp1: gpio@22 {
};
};
+&sdhci0 {
+ bootph-all;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc0_pins_default>;
+ status = "okay";
+};
+
&sdhci1 {
vmmc-supply = <&vdd_mmc1>;
vqmmc-supply = <&vdd_sd_dv>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index ee8337bfbbfd..13e1d36123d5 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -203,22 +203,6 @@ AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */
>;
};
- main_mmc0_pins_default: main-mmc0-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
- AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
- AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */
- AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */
- AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */
- AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */
- AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */
- AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */
- AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */
- AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */
- >;
- };
-
main_mmc1_pins_default: main-mmc1-default-pins {
bootph-all;
pinctrl-single,pins = <
@@ -457,14 +441,6 @@ &main_i2c2 {
clock-frequency = <400000>;
};
-&sdhci0 {
- bootph-all;
- status = "okay";
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc0_pins_default>;
-};
-
&sdhci1 {
/* SD/MMC */
bootph-all;
--
2.49.0
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH v2] arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file
2025-07-07 19:08 [PATCH v2] arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file Judith Mendez
@ 2025-07-11 5:04 ` Vignesh Raghavendra
0 siblings, 0 replies; 2+ messages in thread
From: Vignesh Raghavendra @ 2025-07-11 5:04 UTC (permalink / raw)
To: Judith Mendez
Cc: Vignesh Raghavendra, Tero Kristo, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel, devicetree,
linux-kernel
Hi Judith Mendez,
On Mon, 07 Jul 2025 14:08:30 -0500, Judith Mendez wrote:
> This moves pinmux child nodes for sdhci0 node from k3-am62x-sk-common
> to each top level board file. This is needed since we require internal
> pullups for AM62x SK and not for AM62 LP SK since it has external
> pullups on DATA 1-7.
>
> Internal pulls are required for AM62 SK as per JESD84 spec
> recommendation to prevent unconnected lines floating.
>
> [...]
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[1/1] arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file
commit: a0b8da04153eb61cc2eaeeea5cc404e91e557f6b
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-07-11 5:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-07-07 19:08 [PATCH v2] arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file Judith Mendez
2025-07-11 5:04 ` Vignesh Raghavendra
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®