From: "Rob Herring (Arm)" <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Eddie James <eajames@linux.ibm.com>,
Ninad Palsule <ninad@linux.ibm.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
linux-fsi@lists.ozlabs.org
Subject: [PATCH 2/6] ARM: dts: aspeed: Drop "fsi-master" compatibles
Date: Thu, 31 Jul 2025 17:12:19 -0500 [thread overview]
Message-ID: <20250731-dt-fsi-cleanups-v1-2-e7b695a29fc3@kernel.org> (raw)
In-Reply-To: <20250731-dt-fsi-cleanups-v1-0-e7b695a29fc3@kernel.org>
The "fsi-master" compatible has been used inconsistently on FSI masters.
It doesn't have any real use or meaning, so it's easier to drop it
everywhere than add it where missing. It is also not documented by any
schemas (only .txt bindings).
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts | 2 +-
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts | 2 +-
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts | 2 +-
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts | 2 +-
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts | 2 +-
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts | 2 +-
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts | 2 +-
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts | 2 +-
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts | 2 +-
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 4 ++--
10 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
index f42254ba6aeb..79c6919b3570 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
@@ -54,7 +54,7 @@ video_engine_memory: jpegbuffer {
};
fsi: gpio-fsi {
- compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+ compatible = "aspeed,ast2500-cf-fsi-master";
#address-cells = <2>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
index 370738572a55..87acbfc0a1b7 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
@@ -63,7 +63,7 @@ sys_err {
};
fsi: gpio-fsi {
- compatible = "fsi-master-gpio", "fsi-master";
+ compatible = "fsi-master-gpio";
#address-cells = <2>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
index 31ff19ef87a0..6c8b966ffccc 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
@@ -165,7 +165,7 @@ fan4 {
};
fsi: gpio-fsi {
- compatible = "fsi-master-gpio", "fsi-master";
+ compatible = "fsi-master-gpio";
#address-cells = <2>;
#size-cells = <0>;
no-gpio-delays;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
index e5b8d07e7622..1b7c25e307bc 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
@@ -77,7 +77,7 @@ attention {
};
fsi: gpio-fsi {
- compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+ compatible = "aspeed,ast2500-cf-fsi-master";
#address-cells = <2>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
index 45631b47a7b3..c7aa14034dc0 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
@@ -55,7 +55,7 @@ identify {
};
fsi: gpio-fsi {
- compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master";
+ compatible = "aspeed,ast2400-cf-fsi-master";
#address-cells = <2>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
index 2180fa9b6f24..3c03204869e7 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
@@ -68,7 +68,7 @@ power {
};
fsi: gpio-fsi {
- compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+ compatible = "aspeed,ast2500-cf-fsi-master";
#address-cells = <2>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts
index a0e8c97e944a..39d0fe46fd9e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts
@@ -200,7 +200,7 @@ rear-id {
};
fsi: gpio-fsi {
- compatible = "fsi-master-gpio", "fsi-master";
+ compatible = "fsi-master-gpio";
#address-cells = <2>;
#size-cells = <0>;
no-gpio-delays;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
index 8b1e82c8cdfe..89907b628b65 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
@@ -173,7 +173,7 @@ power-button {
};
fsi: gpio-fsi {
- compatible = "fsi-master-gpio", "fsi-master";
+ compatible = "fsi-master-gpio";
#address-cells = <2>;
#size-cells = <0>;
no-gpio-delays;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
index 9904f0a58cfa..9b49b0aa8b35 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
@@ -96,7 +96,7 @@ hdd_fault {
};
fsi: gpio-fsi {
- compatible = "fsi-master-gpio", "fsi-master";
+ compatible = "fsi-master-gpio";
#address-cells = <2>;
#size-cells = <0>;
no-gpio-delays;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 8ed715bd53aa..acdb6ae74b27 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -847,7 +847,7 @@ i2c: bus@1e78a000 {
fsim0: fsi@1e79b000 {
#interrupt-cells = <1>;
- compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+ compatible = "aspeed,ast2600-fsi-master";
reg = <0x1e79b000 0x94>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
@@ -859,7 +859,7 @@ fsim0: fsi@1e79b000 {
fsim1: fsi@1e79b100 {
#interrupt-cells = <1>;
- compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+ compatible = "aspeed,ast2600-fsi-master";
reg = <0x1e79b100 0x94>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
--
2.47.2
next prev parent reply other threads:[~2025-07-31 22:12 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-31 22:12 [PATCH 0/6] ASpeed FSI DT clean-ups Rob Herring (Arm)
2025-07-31 22:12 ` [PATCH 1/6] ARM: dts: aspeed: Drop "no-gpio-delays" Rob Herring (Arm)
2025-08-01 14:56 ` Eddie James
2025-07-31 22:12 ` Rob Herring (Arm) [this message]
2025-08-01 14:57 ` [PATCH 2/6] ARM: dts: aspeed: Drop "fsi-master" compatibles Eddie James
2025-07-31 22:12 ` [PATCH 3/6] ARM: dts: aspeed: Add missing "ibm,spi-fsi" compatibles Rob Herring (Arm)
2025-08-01 14:58 ` Eddie James
2025-07-31 22:12 ` [PATCH 4/6] MAINTAINERS: Add FSI bindings to FSI subsystem entry Rob Herring (Arm)
2025-08-01 14:59 ` Eddie James
2025-07-31 22:12 ` [PATCH 5/6] dt-bindings: fsi: Convert fsi-master-gpio to DT schema Rob Herring (Arm)
2025-08-01 15:01 ` Eddie James
2025-07-31 22:12 ` [PATCH 6/6] dt-bindings: fsi: Convert aspeed,ast2400-cf-fsi-master " Rob Herring (Arm)
2025-08-01 15:03 ` Eddie James
2025-08-04 1:38 ` [PATCH 0/6] ASpeed FSI DT clean-ups Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250731-dt-fsi-cleanups-v1-2-e7b695a29fc3@kernel.org \
--to=robh@kernel.org \
--cc=andrew@codeconstruct.com.au \
--cc=benh@kernel.crashing.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eajames@linux.ibm.com \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-fsi@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ninad@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®