[PATCH 0/6] crypto: hisilicon - enhancements and fixes for device reset and configuration

[Chenghai Huang <huangchenghai2@huawei.com>]

1.The configuration of each modules need to be restored after
device reset.
2.Cleanup performance mode configuration function, this register
which do not require read-back verification.
3.Add a check for the sva status before resetting.
4.Check if the input parameters match the device PF.
5.Register reserved interrupt for virtual function to avoid
Warnings with GICv4 and VF passthrough.
6.Repair a hardware register, otherwise the stream mode LZ77
algorithm will be affected.

Chenghai Huang (3):
  crypto: hisilicon - re-enable address prefetch after device resuming
  crypto: hisilicon/zip - remove unnecessary validation for
    high-performance mode configurations
  crypto: hisilicon/zip - enable literal length in stream mode
    compression

Weili Qian (2):
  crypto: hisilicon - check the sva module status while enabling or
    disabling address prefetch
  crypto: hisilicon/qm - request reserved interrupt for virtual function

Zhushuai Yin (1):
  crypto: hisilicon/qm - check whether the input function and PF are on
    the same device

 drivers/crypto/hisilicon/hpre/hpre_main.c | 127 ++++++++++++++--------
 drivers/crypto/hisilicon/qm.c             |  45 ++++++--
 drivers/crypto/hisilicon/sec2/sec_main.c  | 126 ++++++++++++++-------
 drivers/crypto/hisilicon/zip/zip_main.c   | 114 ++++++++++++++-----
 4 files changed, 293 insertions(+), 119 deletions(-)

-- 
2.33.0