* [PATCH] HID: logitech: Add ids for G PRO 2 LIGHTSPEED
@ 2025-08-20 7:49 Matt Coffin
2025-08-20 8:43 ` Bastien Nocera
2025-08-20 18:13 ` Jiri Kosina
0 siblings, 2 replies; 3+ messages in thread
From: Matt Coffin @ 2025-08-20 7:49 UTC (permalink / raw)
To: linux-input
Cc: Jiri Kosina, Benjamin Tissoires, Filipe Laíns,
Bastien Nocera, linux-kernel, Matt Coffin
Adds support for the G PRO 2 LIGHTSPEED Wireless via it's nano receiver
or directly. This nano receiver appears to work identically to the 1_1
receiver for the case I've verified, which is the battery status through
lg-hidpp.
The same appears to be the case wired, sharing much with the Pro X
Superlight 2; differences seemed to lie in userland configuration rather
than in interfaces used by hid_logitech_hidpp on the kernel side.
I verified the sysfs interface for battery charge/discharge status, and
capacity read to be working on my 910-007290 device (white).
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-logitech-dj.c | 4 ++++
drivers/hid/hid-logitech-hidpp.c | 2 ++
3 files changed, 7 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 5a1096283855..37dc42380373 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -907,6 +907,7 @@
#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2 0xc534
#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1 0xc539
#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1 0xc53f
+#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2 0xc543
#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY 0xc53a
#define USB_DEVICE_ID_LOGITECH_BOLT_RECEIVER 0xc548
#define USB_DEVICE_ID_SPACETRAVELLER 0xc623
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 34fa71ceec2b..cce54dd9884a 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -1983,6 +1983,10 @@ static const struct hid_device_id logi_dj_receivers[] = {
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
.driver_data = recvr_type_gaming_hidpp},
+ { /* Logitech lightspeed receiver (0xc543) */
+ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+ USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2),
+ .driver_data = recvr_type_gaming_hidpp},
{ /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 10a3bc5f931b..aaef405a717e 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -4596,6 +4596,8 @@ static const struct hid_device_id hidpp_devices[] = {
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC094) },
{ /* Logitech G Pro X Superlight 2 Gaming Mouse over USB */
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC09b) },
+ { /* Logitech G PRO 2 LIGHTSPEED Wireless Mouse over USB */
+ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xc09a) },
{ /* G935 Gaming Headset */
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0x0a87),
--
2.50.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] HID: logitech: Add ids for G PRO 2 LIGHTSPEED
2025-08-20 7:49 [PATCH] HID: logitech: Add ids for G PRO 2 LIGHTSPEED Matt Coffin
@ 2025-08-20 8:43 ` Bastien Nocera
2025-08-20 18:13 ` Jiri Kosina
1 sibling, 0 replies; 3+ messages in thread
From: Bastien Nocera @ 2025-08-20 8:43 UTC (permalink / raw)
To: Matt Coffin, linux-input
Cc: Jiri Kosina, Benjamin Tissoires, Filipe Laíns, linux-kernel
On Wed, 2025-08-20 at 01:49 -0600, Matt Coffin wrote:
> Adds support for the G PRO 2 LIGHTSPEED Wireless via it's nano receiver
"its"
> or directly. This nano receiver appears to work identically to the 1_1
> receiver for the case I've verified, which is the battery status through
> lg-hidpp.
>
> The same appears to be the case wired, sharing much with the Pro X
> Superlight 2; differences seemed to lie in userland configuration rather
> than in interfaces used by hid_logitech_hidpp on the kernel side.
>
> I verified the sysfs interface for battery charge/discharge status, and
> capacity read to be working on my 910-007290 device (white).
>
> Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Otherwise LGTM
Reviewed-by: Bastien Nocera <hadess@hadess.net>
> ---
> drivers/hid/hid-ids.h | 1 +
> drivers/hid/hid-logitech-dj.c | 4 ++++
> drivers/hid/hid-logitech-hidpp.c | 2 ++
> 3 files changed, 7 insertions(+)
>
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 5a1096283855..37dc42380373 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -907,6 +907,7 @@
> #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2 0xc534
> #define
> USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1 0xc539
> #define
> USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1 0xc53f
> +#define
> USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2 0xc543
> #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY 0xc53a
> #define USB_DEVICE_ID_LOGITECH_BOLT_RECEIVER 0xc548
> #define USB_DEVICE_ID_SPACETRAVELLER 0xc623
> diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-
> logitech-dj.c
> index 34fa71ceec2b..cce54dd9884a 100644
> --- a/drivers/hid/hid-logitech-dj.c
> +++ b/drivers/hid/hid-logitech-dj.c
> @@ -1983,6 +1983,10 @@ static const struct hid_device_id
> logi_dj_receivers[] = {
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1)
> ,
> .driver_data = recvr_type_gaming_hidpp},
> + { /* Logitech lightspeed receiver (0xc543) */
> + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> + USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2)
> ,
> + .driver_data = recvr_type_gaming_hidpp},
>
> { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> USB_DEVICE_ID_MX3000_RECEIVER),
> diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-
> logitech-hidpp.c
> index 10a3bc5f931b..aaef405a717e 100644
> --- a/drivers/hid/hid-logitech-hidpp.c
> +++ b/drivers/hid/hid-logitech-hidpp.c
> @@ -4596,6 +4596,8 @@ static const struct hid_device_id
> hidpp_devices[] = {
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC094) },
> { /* Logitech G Pro X Superlight 2 Gaming Mouse over USB */
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC09b) },
> + { /* Logitech G PRO 2 LIGHTSPEED Wireless Mouse over USB */
> + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xc09a) },
>
> { /* G935 Gaming Headset */
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0x0a87),
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] HID: logitech: Add ids for G PRO 2 LIGHTSPEED
2025-08-20 7:49 [PATCH] HID: logitech: Add ids for G PRO 2 LIGHTSPEED Matt Coffin
2025-08-20 8:43 ` Bastien Nocera
@ 2025-08-20 18:13 ` Jiri Kosina
1 sibling, 0 replies; 3+ messages in thread
From: Jiri Kosina @ 2025-08-20 18:13 UTC (permalink / raw)
To: Matt Coffin
Cc: linux-input, Benjamin Tissoires, Filipe Laíns,
Bastien Nocera, linux-kernel
On Wed, 20 Aug 2025, Matt Coffin wrote:
> Adds support for the G PRO 2 LIGHTSPEED Wireless via it's nano receiver
> or directly. This nano receiver appears to work identically to the 1_1
> receiver for the case I've verified, which is the battery status through
> lg-hidpp.
>
> The same appears to be the case wired, sharing much with the Pro X
> Superlight 2; differences seemed to lie in userland configuration rather
> than in interfaces used by hid_logitech_hidpp on the kernel side.
>
> I verified the sysfs interface for battery charge/discharge status, and
> capacity read to be working on my 910-007290 device (white).
>
> Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
> ---
> drivers/hid/hid-ids.h | 1 +
> drivers/hid/hid-logitech-dj.c | 4 ++++
> drivers/hid/hid-logitech-hidpp.c | 2 ++
> 3 files changed, 7 insertions(+)
>
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 5a1096283855..37dc42380373 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -907,6 +907,7 @@
> #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2 0xc534
> #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1 0xc539
> #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1 0xc53f
> +#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2 0xc543
> #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY 0xc53a
> #define USB_DEVICE_ID_LOGITECH_BOLT_RECEIVER 0xc548
> #define USB_DEVICE_ID_SPACETRAVELLER 0xc623
> diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
> index 34fa71ceec2b..cce54dd9884a 100644
> --- a/drivers/hid/hid-logitech-dj.c
> +++ b/drivers/hid/hid-logitech-dj.c
> @@ -1983,6 +1983,10 @@ static const struct hid_device_id logi_dj_receivers[] = {
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
> .driver_data = recvr_type_gaming_hidpp},
> + { /* Logitech lightspeed receiver (0xc543) */
> + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> + USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2),
> + .driver_data = recvr_type_gaming_hidpp},
>
> { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
> diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
> index 10a3bc5f931b..aaef405a717e 100644
> --- a/drivers/hid/hid-logitech-hidpp.c
> +++ b/drivers/hid/hid-logitech-hidpp.c
> @@ -4596,6 +4596,8 @@ static const struct hid_device_id hidpp_devices[] = {
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC094) },
> { /* Logitech G Pro X Superlight 2 Gaming Mouse over USB */
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC09b) },
> + { /* Logitech G PRO 2 LIGHTSPEED Wireless Mouse over USB */
> + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xc09a) },
>
> { /* G935 Gaming Headset */
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0x0a87),
Applied to hid.git#for-6.17/upstream-fixes, thanks.
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2025-08-20 18:13 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-08-20 7:49 [PATCH] HID: logitech: Add ids for G PRO 2 LIGHTSPEED Matt Coffin
2025-08-20 8:43 ` Bastien Nocera
2025-08-20 18:13 ` Jiri Kosina
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®