From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Michael Roth <michael.roth@amd.com>,
Yan Zhao <yan.y.zhao@intel.com>, Ira Weiny <ira.weiny@intel.com>,
Vishal Annapurve <vannapurve@google.com>,
Rick Edgecombe <rick.p.edgecombe@intel.com>
Subject: [RFC PATCH 12/12] KVM: TDX: Rename nr_premapped to nr_pending_tdh_mem_page_adds
Date: Tue, 26 Aug 2025 17:05:22 -0700 [thread overview]
Message-ID: <20250827000522.4022426-13-seanjc@google.com> (raw)
In-Reply-To: <20250827000522.4022426-1-seanjc@google.com>
Rename "nr_premapped" to an asurdly verbose "nr_pending_tdh_mem_page_adds"
to make it explicitly clear what the counter tracks. "pre-map" is far
too similar to "pre-fault", especially since tdx_sept_set_private_spte()
deals with both "pre_fault_allowed" and the counter.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/vmx/tdx.c | 8 ++++----
arch/x86/kvm/vmx/tdx.h | 9 +++++++--
2 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/arch/x86/kvm/vmx/tdx.c b/arch/x86/kvm/vmx/tdx.c
index 5d2bb27f22da..f9ac590e8ff0 100644
--- a/arch/x86/kvm/vmx/tdx.c
+++ b/arch/x86/kvm/vmx/tdx.c
@@ -1639,7 +1639,7 @@ static int tdx_sept_set_private_spte(struct kvm *kvm, gfn_t gfn,
if (KVM_BUG_ON(kvm->arch.pre_fault_allowed, kvm))
return -EIO;
- kvm_tdx->nr_premapped++;
+ kvm_tdx->nr_pending_tdh_mem_page_adds++;
return 0;
}
@@ -1771,7 +1771,7 @@ static int tdx_sept_zap_private_spte(struct kvm *kvm, gfn_t gfn,
if (tdx_is_sept_zap_err_due_to_premap(kvm_tdx, err, entry, level)) {
lockdep_assert_held(&kvm->slots_lock);
- if (KVM_BUG_ON(--kvm_tdx->nr_premapped < 0, kvm))
+ if (KVM_BUG_ON(--kvm_tdx->nr_pending_tdh_mem_page_adds < 0, kvm))
return -EIO;
return 0;
@@ -2846,7 +2846,7 @@ static int tdx_td_finalize(struct kvm *kvm, struct kvm_tdx_cmd *cmd)
* Pages are pending for KVM_TDX_INIT_MEM_REGION to issue
* TDH.MEM.PAGE.ADD().
*/
- if (kvm_tdx->nr_premapped)
+ if (kvm_tdx->nr_pending_tdh_mem_page_adds)
return -EINVAL;
cmd->hw_error = tdh_mr_finalize(&kvm_tdx->td);
@@ -3160,7 +3160,7 @@ static int tdx_gmem_post_populate(struct kvm *kvm, gfn_t gfn, kvm_pfn_t pfn,
goto out;
}
- KVM_BUG_ON(--kvm_tdx->nr_premapped < 0, kvm);
+ KVM_BUG_ON(--kvm_tdx->nr_pending_tdh_mem_page_adds < 0, kvm);
if (arg->flags & KVM_TDX_MEASURE_MEMORY_REGION) {
for (i = 0; i < PAGE_SIZE; i += TDX_EXTENDMR_CHUNKSIZE) {
diff --git a/arch/x86/kvm/vmx/tdx.h b/arch/x86/kvm/vmx/tdx.h
index 04ba9ea3e0ba..45d86f9fa41c 100644
--- a/arch/x86/kvm/vmx/tdx.h
+++ b/arch/x86/kvm/vmx/tdx.h
@@ -36,8 +36,13 @@ struct kvm_tdx {
struct tdx_td td;
- /* For KVM_TDX_INIT_MEM_REGION. */
- unsigned long nr_premapped;
+ /*
+ * The number of pages that KVM_TDX_INIT_MEM_REGION has mapped into the
+ * S-EPT, but not yet initialized via TDH.MEM.PAGE_ADD. Used to sanity
+ * check adding pages to the image, and to ensure that all pages have
+ * been initialized before finalizing the TD.
+ */
+ unsigned long nr_pending_tdh_mem_page_adds;
/*
* Prevent vCPUs from TD entry to ensure SEPT zap related SEAMCALLs do
--
2.51.0.268.g9569e192d0-goog
next prev parent reply other threads:[~2025-08-27 0:05 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-27 0:05 [RFC PATCH 00/12] KVM: x86/mmu: TDX post-populate cleanups Sean Christopherson
2025-08-27 0:05 ` [RFC PATCH 01/12] KVM: TDX: Drop PROVE_MMU=y sanity check on to-be-populated mappings Sean Christopherson
2025-08-27 8:14 ` Yan Zhao
2025-08-28 0:37 ` Ira Weiny
2025-08-28 2:13 ` Huang, Kai
2025-08-27 0:05 ` [RFC PATCH 02/12] KVM: x86/mmu: Add dedicated API to map guest_memfd pfn into TDP MMU Sean Christopherson
2025-08-27 8:25 ` Yan Zhao
2025-08-28 0:54 ` Edgecombe, Rick P
2025-08-28 1:26 ` Edgecombe, Rick P
2025-08-28 6:23 ` Yan Zhao
2025-08-28 19:40 ` Sean Christopherson
2025-08-29 1:16 ` Yan Zhao
2025-09-01 0:39 ` Yan Zhao
2025-08-28 6:55 ` Yan Zhao
2025-08-28 0:40 ` Ira Weiny
2025-08-28 1:51 ` Edgecombe, Rick P
2025-08-28 19:57 ` Sean Christopherson
2025-08-27 0:05 ` [RFC PATCH 03/12] Revert "KVM: x86/tdp_mmu: Add a helper function to walk down the TDP MMU" Sean Christopherson
2025-08-27 0:05 ` [RFC PATCH 04/12] KVM: x86/mmu: Rename kvm_tdp_map_page() to kvm_tdp_prefault_page() Sean Christopherson
2025-08-28 2:01 ` Edgecombe, Rick P
2025-08-28 18:50 ` Sean Christopherson
2025-08-28 19:04 ` Edgecombe, Rick P
2025-08-27 0:05 ` [RFC PATCH 05/12] KVM: TDX: Drop superfluous page pinning in S-EPT management Sean Christopherson
2025-08-27 8:33 ` Yan Zhao
2025-08-28 2:05 ` Edgecombe, Rick P
2025-08-28 20:16 ` Sean Christopherson
2025-08-28 0:36 ` Ira Weiny
2025-08-28 7:08 ` Yan Zhao
2025-08-28 15:54 ` Ira Weiny
2025-08-28 2:45 ` Huang, Kai
2025-08-27 0:05 ` [RFC PATCH 06/12] KVM: TDX: Return -EIO, not -EINVAL, on a KVM_BUG_ON() condition Sean Christopherson
2025-08-27 8:39 ` Yan Zhao
2025-08-27 17:26 ` Sean Christopherson
2025-08-28 2:11 ` Edgecombe, Rick P
2025-08-28 19:21 ` Sean Christopherson
2025-08-28 20:13 ` Edgecombe, Rick P
2025-08-28 21:00 ` Sean Christopherson
2025-08-28 21:19 ` Edgecombe, Rick P
2025-08-28 21:34 ` Sean Christopherson
2025-08-28 15:03 ` Ira Weiny
2025-08-27 0:05 ` [RFC PATCH 07/12] KVM: TDX: Avoid a double-KVM_BUG_ON() in tdx_sept_zap_private_spte() Sean Christopherson
2025-08-28 2:19 ` Edgecombe, Rick P
2025-08-28 14:50 ` Edgecombe, Rick P
2025-08-29 1:10 ` Yan Zhao
2025-08-28 15:02 ` Ira Weiny
2025-08-27 0:05 ` [RFC PATCH 08/12] KVM: TDX: Use atomic64_dec_return() instead of a poor equivalent Sean Christopherson
2025-08-28 2:56 ` Edgecombe, Rick P
2025-08-28 6:48 ` Yan Zhao
2025-08-28 19:14 ` Edgecombe, Rick P
2025-08-28 22:33 ` Sean Christopherson
2025-08-28 23:18 ` Edgecombe, Rick P
2025-08-28 15:03 ` Ira Weiny
2025-08-27 0:05 ` [RFC PATCH 09/12] KVM: TDX: Fold tdx_mem_page_record_premap_cnt() into its sole caller Sean Christopherson
2025-08-27 9:02 ` Yan Zhao
2025-08-27 19:08 ` Sean Christopherson
2025-08-28 3:13 ` Edgecombe, Rick P
2025-08-28 5:56 ` Yan Zhao
2025-08-28 19:08 ` Edgecombe, Rick P
2025-08-28 5:43 ` Yan Zhao
2025-08-28 17:00 ` Sean Christopherson
2025-08-28 18:52 ` Edgecombe, Rick P
2025-08-28 20:26 ` Sean Christopherson
2025-08-28 21:33 ` Edgecombe, Rick P
2025-08-28 21:57 ` Sean Christopherson
2025-08-28 23:17 ` Edgecombe, Rick P
2025-08-29 6:08 ` Yan Zhao
2025-08-28 22:06 ` Ira Weiny
2025-08-28 23:17 ` Sean Christopherson
2025-08-29 0:35 ` Ira Weiny
2025-08-29 6:06 ` Yan Zhao
2025-08-28 21:44 ` Sean Christopherson
2025-08-29 2:42 ` Binbin Wu
2025-08-29 2:31 ` Yan Zhao
2025-08-29 6:33 ` Yan Zhao
2025-08-28 15:30 ` Ira Weiny
2025-08-28 15:28 ` Ira Weiny
2025-08-27 0:05 ` [RFC PATCH 10/12] KVM: TDX: Assert that slots_lock is held when nr_premapped is accessed Sean Christopherson
2025-08-27 0:05 ` [RFC PATCH 11/12] KVM: TDX: Track nr_premapped as an "unsigned long", not an "atomic64_t" Sean Christopherson
2025-08-27 9:12 ` Yan Zhao
2025-08-27 0:05 ` Sean Christopherson [this message]
2025-08-27 9:22 ` [RFC PATCH 12/12] KVM: TDX: Rename nr_premapped to nr_pending_tdh_mem_page_adds Yan Zhao
2025-08-28 15:23 ` Ira Weiny
2025-08-27 9:48 ` [RFC PATCH 00/12] KVM: x86/mmu: TDX post-populate cleanups Yan Zhao
2025-08-28 19:01 ` Edgecombe, Rick P
2025-08-28 23:19 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250827000522.4022426-13-seanjc@google.com \
--to=seanjc@google.com \
--cc=ira.weiny@intel.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.roth@amd.com \
--cc=pbonzini@redhat.com \
--cc=rick.p.edgecombe@intel.com \
--cc=vannapurve@google.com \
--cc=yan.y.zhao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®