From: Akhil P Oommen <akhilpo@oss.qualcomm.com>
To: Rob Clark <robin.clark@oss.qualcomm.com>,
Sean Paul <sean@poorly.run>,
Konrad Dybcio <konradybcio@kernel.org>,
Dmitry Baryshkov <lumag@kernel.org>,
Abhinav Kumar <abhinav.kumar@linux.dev>,
Jessica Zhang <jessica.zhang@oss.qualcomm.com>,
Marijn Suijten <marijn.suijten@somainline.org>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Antonino Maniscalco <antomani103@gmail.com>,
Neil Armstrong <neil.armstrong@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org,
Akhil P Oommen <akhilpo@oss.qualcomm.com>,
stable@vger.kernel.org
Subject: [PATCH v2 04/16] drm/msm/a6xx: Fix PDC sleep sequence
Date: Mon, 08 Sep 2025 13:56:57 +0530 [thread overview]
Message-ID: <20250908-ifpc-support-v2-4-631b1080bf91@oss.qualcomm.com> (raw)
In-Reply-To: <20250908-ifpc-support-v2-0-631b1080bf91@oss.qualcomm.com>
Since the PDC resides out of the GPU subsystem and cannot be reset in
case it enters bad state, utmost care must be taken to trigger the PDC
wake/sleep routines in the correct order.
The PDC wake sequence can be exercised only after a PDC sleep sequence.
Additionally, GMU firmware should initialize a few registers before the
KMD can trigger a PDC sleep sequence. So PDC sleep can't be done if the
GMU firmware has not initialized. Track these dependencies using a new
status variable and trigger PDC sleep/wake sequences appropriately.
Cc: stable@vger.kernel.org
Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support")
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
---
drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 28 +++++++++++++++++-----------
drivers/gpu/drm/msm/adreno/a6xx_gmu.h | 6 ++++++
2 files changed, 23 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
index 06870f6596a7cb045deecaff3c95fba32ee84d52..ba593ccfe3c6a2f3a2ea0db3a1435d0668ed7bf2 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -279,6 +279,8 @@ static int a6xx_gmu_start(struct a6xx_gmu *gmu)
if (ret)
DRM_DEV_ERROR(gmu->dev, "GMU firmware initialization timed out\n");
+ set_bit(GMU_STATUS_FW_START, &gmu->status);
+
return ret;
}
@@ -525,6 +527,9 @@ static int a6xx_rpmh_start(struct a6xx_gmu *gmu)
int ret;
u32 val;
+ if (!test_and_clear_bit(GMU_STATUS_PDC_SLEEP, &gmu->status))
+ return 0;
+
gmu_write(gmu, REG_A6XX_GMU_RSCC_CONTROL_REQ, BIT(1));
ret = gmu_poll_timeout(gmu, REG_A6XX_GMU_RSCC_CONTROL_ACK, val,
@@ -552,6 +557,9 @@ static void a6xx_rpmh_stop(struct a6xx_gmu *gmu)
int ret;
u32 val;
+ if (test_and_clear_bit(GMU_STATUS_FW_START, &gmu->status))
+ return;
+
gmu_write(gmu, REG_A6XX_GMU_RSCC_CONTROL_REQ, 1);
ret = gmu_poll_timeout_rscc(gmu, REG_A6XX_GPU_RSCC_RSC_STATUS0_DRV0,
@@ -560,6 +568,8 @@ static void a6xx_rpmh_stop(struct a6xx_gmu *gmu)
DRM_DEV_ERROR(gmu->dev, "Unable to power off the GPU RSC\n");
gmu_write(gmu, REG_A6XX_GMU_RSCC_CONTROL_REQ, 0);
+
+ set_bit(GMU_STATUS_PDC_SLEEP, &gmu->status);
}
static inline void pdc_write(void __iomem *ptr, u32 offset, u32 value)
@@ -688,8 +698,6 @@ static void a6xx_gmu_rpmh_init(struct a6xx_gmu *gmu)
/* ensure no writes happen before the uCode is fully written */
wmb();
- a6xx_rpmh_stop(gmu);
-
err:
if (!IS_ERR_OR_NULL(pdcptr))
iounmap(pdcptr);
@@ -849,19 +857,15 @@ static int a6xx_gmu_fw_start(struct a6xx_gmu *gmu, unsigned int state)
else
gmu_write(gmu, REG_A6XX_GMU_GENERAL_7, 1);
- if (state == GMU_WARM_BOOT) {
- ret = a6xx_rpmh_start(gmu);
- if (ret)
- return ret;
- } else {
+ ret = a6xx_rpmh_start(gmu);
+ if (ret)
+ return ret;
+
+ if (state == GMU_COLD_BOOT) {
if (WARN(!adreno_gpu->fw[ADRENO_FW_GMU],
"GMU firmware is not loaded\n"))
return -ENOENT;
- ret = a6xx_rpmh_start(gmu);
- if (ret)
- return ret;
-
ret = a6xx_gmu_fw_load(gmu);
if (ret)
return ret;
@@ -1046,6 +1050,8 @@ static void a6xx_gmu_force_off(struct a6xx_gmu *gmu)
/* Reset GPU core blocks */
a6xx_gpu_sw_reset(gpu, true);
+
+ a6xx_rpmh_stop(gmu);
}
static void a6xx_gmu_set_initial_freq(struct msm_gpu *gpu, struct a6xx_gmu *gmu)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.h b/drivers/gpu/drm/msm/adreno/a6xx_gmu.h
index d1ce11131ba6746056b3314dccdc3612cf982306..069a8c9474e8beb4ebe84d1609a8d38b44314125 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.h
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.h
@@ -117,6 +117,12 @@ struct a6xx_gmu {
struct qmp *qmp;
struct a6xx_hfi_msg_bw_table *bw_table;
+
+/* To check if we can trigger sleep seq at PDC. Cleared in a6xx_rpmh_stop() */
+#define GMU_STATUS_FW_START 0
+/* To track if PDC sleep seq was done */
+#define GMU_STATUS_PDC_SLEEP 1
+ unsigned long status;
};
static inline u32 gmu_read(struct a6xx_gmu *gmu, u32 offset)
--
2.50.1
next prev parent reply other threads:[~2025-09-08 8:27 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-08 8:26 [PATCH v2 00/16] drm/msm: Support for Inter Frame Power Collapse (IFPC) feature Akhil P Oommen
2025-09-08 8:26 ` [PATCH v2 01/16] drm/msm: Update GMU register xml Akhil P Oommen
2025-09-08 8:26 ` [PATCH v2 02/16] drm/msm: a6xx: Fix gx_is_on check for a7x family Akhil P Oommen
2025-09-08 8:26 ` [PATCH v2 03/16] drm/msm/a6xx: Poll additional DRV status Akhil P Oommen
2025-09-08 15:18 ` Konrad Dybcio
2025-09-08 16:49 ` Akhil P Oommen
2025-09-08 8:26 ` Akhil P Oommen [this message]
2025-09-08 8:26 ` [PATCH v2 05/16] drm/msm: a6xx: Refactor a6xx_sptprac_enable() Akhil P Oommen
2025-09-08 15:21 ` Konrad Dybcio
2025-09-08 8:26 ` [PATCH v2 06/16] drm/msm: Add an ftrace for gpu register access Akhil P Oommen
2025-09-08 8:27 ` [PATCH v2 07/16] drm/msm/adreno: Add fenced regwrite support Akhil P Oommen
2025-09-08 15:37 ` Konrad Dybcio
2025-09-08 16:15 ` Akhil P Oommen
2025-09-08 15:54 ` Connor Abbott
2025-09-08 16:46 ` Akhil P Oommen
2025-09-08 8:27 ` [PATCH v2 08/16] drm/msm/a6xx: Set Keep-alive votes to block IFPC Akhil P Oommen
2025-09-08 8:27 ` [PATCH v2 09/16] drm/msm/a6xx: Switch to GMU AO counter Akhil P Oommen
2025-09-08 8:27 ` [PATCH v2 10/16] drm/msm/a6xx: Poll AHB fence status in GPU IRQ handler Akhil P Oommen
2025-09-08 8:27 ` [PATCH v2 11/16] drm/msm: Add support for IFPC Akhil P Oommen
2025-09-08 8:27 ` [PATCH v2 12/16] drm/msm/a6xx: Fix hangcheck " Akhil P Oommen
2025-09-08 8:27 ` [PATCH v2 13/16] drm/msm/adreno: Disable IFPC when sysprof is active Akhil P Oommen
2025-09-08 8:27 ` [PATCH v2 14/16] drm/msm/a6xx: Make crashstate capture IFPC safe Akhil P Oommen
2025-09-08 8:27 ` [PATCH v2 15/16] drm/msm/a6xx: Enable IFPC on Adreno X1-85 Akhil P Oommen
2025-09-08 15:24 ` Konrad Dybcio
2025-10-31 23:43 ` Chia-I Wu
2025-11-01 12:57 ` Rob Clark
2025-11-01 19:52 ` Akhil P Oommen
2025-11-02 17:55 ` Chia-I Wu
2025-11-03 15:11 ` Akhil P Oommen
2025-09-08 8:27 ` [PATCH v2 16/16] drm/msm/a6xx: Enable IFPC on A750 GPU Akhil P Oommen
2025-09-08 17:11 ` [PATCH v2 00/16] drm/msm: Support for Inter Frame Power Collapse (IFPC) feature Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250908-ifpc-support-v2-4-631b1080bf91@oss.qualcomm.com \
--to=akhilpo@oss.qualcomm.com \
--cc=abhinav.kumar@linux.dev \
--cc=airlied@gmail.com \
--cc=antomani103@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jessica.zhang@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lumag@kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=neil.armstrong@linaro.org \
--cc=robin.clark@oss.qualcomm.com \
--cc=sean@poorly.run \
--cc=simona@ffwll.ch \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®