[PATCH v2 1/6] misc: amd-sbi: Add helper function to prepare I3C support

[Akshay Gupta <akshay.gupta@amd.com>]

New AMD processors support APML connection over I3C.
Move the code, common for both I2C and I3C to new helper
function, "sbrmi_common_probe()"
While at it, renaming the static structure regmap_config "sbrmi_i2c_regmap_config"
to "sbrmi_regmap_config" to avoid confusion.

Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
---

Changes from v1:
- New patch, as per suggestion to use same module for i2c and i3c
- Patch series is applied over "char-misc-next", commit ID: e2258cfd9b9809002ad52f1f763ff192e612a1fe

 drivers/misc/amd-sbi/rmi-i2c.c | 32 +++++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 11 deletions(-)

diff --git a/drivers/misc/amd-sbi/rmi-i2c.c b/drivers/misc/amd-sbi/rmi-i2c.c
index f891f5af4bc6..d41457a52376 100644
--- a/drivers/misc/amd-sbi/rmi-i2c.c
+++ b/drivers/misc/amd-sbi/rmi-i2c.c
@@ -50,26 +50,18 @@ static int sbrmi_get_max_pwr_limit(struct sbrmi_data *data)
 	return ret;
 }
 
-static int sbrmi_i2c_probe(struct i2c_client *client)
+static int sbrmi_common_probe(struct device *dev, struct regmap *regmap, uint8_t address)
 {
-	struct device *dev = &client->dev;
 	struct sbrmi_data *data;
-	struct regmap_config sbrmi_i2c_regmap_config = {
-		.reg_bits = 8,
-		.val_bits = 8,
-	};
 	int ret;
 
 	data = devm_kzalloc(dev, sizeof(struct sbrmi_data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
+	data->regmap = regmap;
 	mutex_init(&data->lock);
 
-	data->regmap = devm_regmap_init_i2c(client, &sbrmi_i2c_regmap_config);
-	if (IS_ERR(data->regmap))
-		return PTR_ERR(data->regmap);
-
 	/* Enable alert for SB-RMI sequence */
 	ret = sbrmi_enable_alert(data);
 	if (ret < 0)
@@ -80,7 +72,8 @@ static int sbrmi_i2c_probe(struct i2c_client *client)
 	if (ret < 0)
 		return ret;
 
-	data->dev_static_addr = client->addr;
+	data->dev_static_addr = address;
+
 	dev_set_drvdata(dev, data);
 
 	ret = create_hwmon_sensor_device(dev, data);
@@ -89,6 +82,23 @@ static int sbrmi_i2c_probe(struct i2c_client *client)
 	return create_misc_rmi_device(data, dev);
 }
 
+static struct regmap_config sbrmi_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int sbrmi_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i2c(client, &sbrmi_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return sbrmi_common_probe(dev, regmap, client->addr);
+}
+
 static void sbrmi_i2c_remove(struct i2c_client *client)
 {
 	struct sbrmi_data *data = dev_get_drvdata(&client->dev);
-- 
2.25.1