From: Haibo Chen <haibo.chen@nxp.com>
To: Han Xu <han.xu@nxp.com>, Yogesh Gaur <yogeshgaur.83@gmail.com>,
Mark Brown <broonie@kernel.org>, Frank Li <frank.li@nxp.com>
Cc: linux-spi@vger.kernel.org, imx@lists.linux.dev,
linux-kernel@vger.kernel.org, Haibo Chen <haibo.chen@nxp.com>
Subject: [PATCH v2 5/5] spi: spi-nxp-fspi: Add OCT-DTR mode support
Date: Wed, 17 Sep 2025 15:27:10 +0800 [thread overview]
Message-ID: <20250917-flexspi-ddr-v2-5-bb9fe2a01889@nxp.com> (raw)
In-Reply-To: <20250917-flexspi-ddr-v2-0-bb9fe2a01889@nxp.com>
Add OCT-DTR mode support in default, since flexspi do not supports
swapping bytes on a 16 bit boundary in OCT-DTR mode, so mark swap16
as false.
lx2160a do not support DQS, so add a quirk to disable DTR mode for this
platform.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
---
drivers/spi/spi-nxp-fspi.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index d25679fafad7a94a7ea2a79d7e3da53f4939c9fa..f9371f98a65bdc7e5eaa612c0770a6228bdda364 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -330,6 +330,8 @@
/* Access flash memory using IP bus only */
#define FSPI_QUIRK_USE_IP_ONLY BIT(0)
+/* Disable DTR */
+#define FSPI_QUIRK_DISABLE_DTR BIT(1)
struct nxp_fspi_devtype_data {
unsigned int rxfifo;
@@ -344,7 +346,7 @@ static struct nxp_fspi_devtype_data lx2160a_data = {
.rxfifo = SZ_512, /* (64 * 64 bits) */
.txfifo = SZ_1K, /* (128 * 64 bits) */
.ahb_buf_size = SZ_2K, /* (256 * 64 bits) */
- .quirks = 0,
+ .quirks = FSPI_QUIRK_DISABLE_DTR,
.lut_num = 32,
.little_endian = true, /* little-endian */
};
@@ -1231,6 +1233,13 @@ static const struct spi_controller_mem_ops nxp_fspi_mem_ops = {
};
static const struct spi_controller_mem_caps nxp_fspi_mem_caps = {
+ .dtr = true,
+ .swap16 = false,
+ .per_op_freq = true,
+};
+
+static const struct spi_controller_mem_caps nxp_fspi_mem_caps_disable_dtr = {
+ .dtr = false,
.per_op_freq = true,
};
@@ -1346,7 +1355,12 @@ static int nxp_fspi_probe(struct platform_device *pdev)
ctlr->bus_num = -1;
ctlr->num_chipselect = NXP_FSPI_MAX_CHIPSELECT;
ctlr->mem_ops = &nxp_fspi_mem_ops;
- ctlr->mem_caps = &nxp_fspi_mem_caps;
+
+ if (f->devtype_data->quirks & FSPI_QUIRK_DISABLE_DTR)
+ ctlr->mem_caps = &nxp_fspi_mem_caps_disable_dtr;
+ else
+ ctlr->mem_caps = &nxp_fspi_mem_caps;
+
ctlr->dev.of_node = np;
ret = devm_add_action_or_reset(dev, nxp_fspi_cleanup, f);
--
2.34.1
next prev parent reply other threads:[~2025-09-17 7:27 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-17 7:27 [PATCH v2 0/5] spi: spi-nxp-fspi: add DTR " Haibo Chen
2025-09-17 7:27 ` [PATCH v2 1/5] spi: spi-nxp-fspi: extract function nxp_fspi_dll_override() Haibo Chen
2025-09-17 16:24 ` Frank Li
2025-09-17 7:27 ` [PATCH v2 2/5] spi: spi-nxp-fspi: set back to dll override mode when clock rate < 100MHz Haibo Chen
2025-09-17 16:26 ` Frank Li
2025-09-17 7:27 ` [PATCH v2 3/5] spi: spi-nxp-fspi: Add the DDR LUT command support Haibo Chen
2025-09-17 7:27 ` [PATCH v2 4/5] spi: spi-nxp-fspi: add the support for sample data from DQS pad Haibo Chen
2025-09-17 16:28 ` Frank Li
2025-09-17 7:27 ` Haibo Chen [this message]
2025-09-17 16:30 ` [PATCH v2 5/5] spi: spi-nxp-fspi: Add OCT-DTR mode support Frank Li
2025-09-17 18:09 ` Mark Brown
2025-09-19 16:03 ` [PATCH v2 0/5] spi: spi-nxp-fspi: add DTR " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250917-flexspi-ddr-v2-5-bb9fe2a01889@nxp.com \
--to=haibo.chen@nxp.com \
--cc=broonie@kernel.org \
--cc=frank.li@nxp.com \
--cc=han.xu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=yogeshgaur.83@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®