[PATCH 1/2] arm64: defconfig: enable GCC, interconnect and pinctrl for Kaanapali

[Jingyi Wang <jingyi.wang@oss.qualcomm.com>]

The serial engine must be properly setup before kernel reash "init",
so UART driver and its dependencies needs to be built in. Enable its
dependency GCC, interconnect and pinctrl as built-in to boot Kaanapali
QRD and MTP board to UART console.

Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index e3a2d37bd104..a3767e2ce02d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -622,6 +622,7 @@ CONFIG_PINCTRL_IPQ5424=y
 CONFIG_PINCTRL_IPQ8074=y
 CONFIG_PINCTRL_IPQ6018=y
 CONFIG_PINCTRL_IPQ9574=y
+CONFIG_PINCTRL_KAANAPALI=y
 CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_MSM8953=y
 CONFIG_PINCTRL_MSM8976=y
@@ -1363,6 +1364,7 @@ CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y
 CONFIG_COMMON_CLK_MT8192_VDECSYS=y
 CONFIG_COMMON_CLK_MT8192_VENCSYS=y
 CONFIG_COMMON_CLK_QCOM=y
+CONFIG_CLK_KAANAPALI_GCC=y
 CONFIG_CLK_X1E80100_CAMCC=m
 CONFIG_CLK_X1E80100_DISPCC=m
 CONFIG_CLK_X1E80100_GCC=y
@@ -1718,6 +1720,7 @@ CONFIG_INTERCONNECT_IMX8MN=m
 CONFIG_INTERCONNECT_IMX8MQ=m
 CONFIG_INTERCONNECT_IMX8MP=y
 CONFIG_INTERCONNECT_QCOM=y
+CONFIG_INTERCONNECT_QCOM_KAANAPALI=y
 CONFIG_INTERCONNECT_QCOM_MSM8916=m
 CONFIG_INTERCONNECT_QCOM_MSM8996=y
 CONFIG_INTERCONNECT_QCOM_OSM_L3=m

-- 
2.25.1