mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
To: mkl@pengutronix.de, mani@kernel.org, thomas.kopp@microchip.com,
	mailhol.vincent@wanadoo.fr, robh@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org, linus.walleij@linaro.org, brgl@bgdev.pl,
	linux-can@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: mukesh.savaliya@oss.qualcomm.com, anup.kulkarni@oss.qualcomm.com,
	Gregor Herburger <gregor.herburger@ew.tq-group.com>,
	Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Subject: [PATCH v5 2/6] can: mcp251xfd: utilize gather_write function for all non-CRC writes
Date: Fri, 26 Sep 2025 19:00:14 +0530	[thread overview]
Message-ID: <20250926133018.3071446-3-viken.dadhaniya@oss.qualcomm.com> (raw)
In-Reply-To: <20250926133018.3071446-1-viken.dadhaniya@oss.qualcomm.com>

From: Gregor Herburger <gregor.herburger@ew.tq-group.com>

This is a preparation patch to add errata workaround for non crc writes.

Currently for non-crc writes to the chip can go through the
.gather_write, .write or the reg_update_bits callback.

To allow the addition of the errata fix at a single location use
mcp251xfd_regmap_nocrc_gather_write for all non-CRC write instructions,
similar to the crc regmap.

Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Tested-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
---
 .../net/can/spi/mcp251xfd/mcp251xfd-regmap.c  | 25 ++++++++++---------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c
index 8c5be8d1c519..e61cbd209955 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c
@@ -12,14 +12,6 @@
 
 static const struct regmap_config mcp251xfd_regmap_crc;
 
-static int
-mcp251xfd_regmap_nocrc_write(void *context, const void *data, size_t count)
-{
-	struct spi_device *spi = context;
-
-	return spi_write(spi, data, count);
-}
-
 static int
 mcp251xfd_regmap_nocrc_gather_write(void *context,
 				    const void *reg, size_t reg_len,
@@ -47,6 +39,15 @@ mcp251xfd_regmap_nocrc_gather_write(void *context,
 	return spi_sync_transfer(spi, xfer, ARRAY_SIZE(xfer));
 }
 
+static int
+mcp251xfd_regmap_nocrc_write(void *context, const void *data, size_t count)
+{
+	const size_t data_offset = sizeof(__be16);
+
+	return mcp251xfd_regmap_nocrc_gather_write(context, data, data_offset,
+						   data + data_offset, count - data_offset);
+}
+
 static inline bool
 mcp251xfd_update_bits_read_reg(const struct mcp251xfd_priv *priv,
 			       unsigned int reg)
@@ -64,6 +65,7 @@ mcp251xfd_update_bits_read_reg(const struct mcp251xfd_priv *priv,
 	case MCP251XFD_REG_CON:
 	case MCP251XFD_REG_OSC:
 	case MCP251XFD_REG_ECCCON:
+	case MCP251XFD_REG_IOCON:
 		return true;
 	default:
 		mcp251xfd_for_each_rx_ring(priv, ring, n) {
@@ -139,10 +141,9 @@ mcp251xfd_regmap_nocrc_update_bits(void *context, unsigned int reg,
 	tmp_le32 = orig_le32 & ~mask_le32;
 	tmp_le32 |= val_le32 & mask_le32;
 
-	mcp251xfd_spi_cmd_write_nocrc(&buf_tx->cmd, reg + first_byte);
-	memcpy(buf_tx->data, &tmp_le32, len);
-
-	return spi_write(spi, buf_tx, sizeof(buf_tx->cmd) + len);
+	reg += first_byte;
+	mcp251xfd_spi_cmd_write_nocrc(&buf_tx->cmd, reg);
+	return mcp251xfd_regmap_nocrc_gather_write(context, &buf_tx->cmd, 2, &tmp_le32, len);
 }
 
 static int
-- 
2.34.1


  parent reply	other threads:[~2025-09-26 13:30 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-26 13:30 [PATCH v5 0/6] can: mcp251xfd: add gpio functionality Viken Dadhaniya
2025-09-26 13:30 ` [PATCH v5 1/6] can: mcp251xfd: move chip sleep mode into runtime pm Viken Dadhaniya
2025-09-26 13:30 ` Viken Dadhaniya [this message]
2025-09-26 13:30 ` [PATCH v5 3/6] can: mcp251xfd: add workaround for errata 5 Viken Dadhaniya
2025-09-26 13:30 ` [PATCH v5 4/6] can: mcp251xfd: only configure PIN1 when rx_int is set Viken Dadhaniya
2025-09-26 13:30 ` [PATCH v5 5/6] can: mcp251xfd: add gpio functionality Viken Dadhaniya
2025-09-29 13:38   ` Bartosz Golaszewski
2025-09-30 11:25     ` Viken Dadhaniya
2025-09-26 13:30 ` [PATCH v5 6/6] dt-bindings: can: mcp251xfd: add gpio-controller property Viken Dadhaniya

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250926133018.3071446-3-viken.dadhaniya@oss.qualcomm.com \
    --to=viken.dadhaniya@oss.qualcomm.com \
    --cc=anup.kulkarni@oss.qualcomm.com \
    --cc=brgl@bgdev.pl \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregor.herburger@ew.tq-group.com \
    --cc=krzk+dt@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mailhol.vincent@wanadoo.fr \
    --cc=mani@kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=mukesh.savaliya@oss.qualcomm.com \
    --cc=robh@kernel.org \
    --cc=thomas.kopp@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®